1. Kupu Whakataki
Thank you for choosing the LEXMAN LED Filament Globe Bulb. This bulb combines a vintage design with modern LED technology, offering energy efficiency and a long lifespan. It provides a powerful 1055 lumens of neutral white light (4000K), equivalent to a 75W incandescent bulb, while consuming only 7.8W. This manual provides important information for the safe and proper installation, operation, and maintenance of your new LED bulb.
2. Nga Korero Haumaru Nui
- Pānuihia nga tohutohu katoa i mua i te whakaurunga.
- Te mate o te ru hiko: Always disconnect power at the fuse box or circuit breaker before installing or replacing the bulb.
- Ensure the bulb is suitable for the fixture and socket type (E27).
- Do not use with dimmers unless explicitly stated on the product packaging or bulb itself. This bulb is not specified as dimmable.
- Kaua e wetewete, e whakarerekē rānei i te pūrama.
- Do not use in enclosed fixtures that restrict airflow, as this may shorten the bulb's lifespan.
- A ape i te pa ki te topuku me nga ringa makuku.
- This bulb is designed for indoor use in dry locations.
3. Tatūnga me te Tāuta
Follow these steps to install your LEXMAN LED Filament Globe Bulb:
- Whakawetohia te hiko: Before attempting any installation, ensure the power supply to the light fixture is completely turned off at the main circuit breaker or fuse box.
- Allow existing bulb to cool: If replacing an old bulb, allow it to cool down completely before touching it.
- Remove old bulb: Wetekina marietia te pōro tawhito mai i te putanga mā te huri i te taha maui.
- Inspect the socket: Check the light fixture's socket for any damage or corrosion. Ensure it is clean and dry.
- Install new bulb: Gently screw the LEXMAN LED Filament Globe Bulb into the E27 socket by turning it clockwise until it is snug. Do not overtighten.
- Whakaora mana: Once the bulb is securely installed, restore power to the light fixture at the circuit breaker or fuse box.
- Whakamātautau: Whakakāhia te whakakā rama ki te whakaū kei te mahi tika te pūrama.
Whakaahua 3.1: Dimensions of the LEXMAN LED Globe Bulb. The bulb has a diameter of 95mm and a total height of 140mm, suitable for E27 sockets.
Whakaahua 3.2: Mua view of the LEXMAN LED Filament Globe Bulb highlighting its key specifications: 4000K neutral white light, E27 base, 1055 lumens output, 7.8W power consumption (equivalent to 75W incandescent), and an instant-on feature (95% intensity in less than 0.5 seconds).
4. Nga Tohutohu Whakahaere
Operating your LEXMAN LED Filament Globe Bulb is straightforward:
- Once installed in a compatible E27 fixture and power is restored, simply use the wall switch or fixture switch to turn the light on or off.
- The bulb provides instant full brightness (95% intensity in less than 0.5 seconds) with its 4000K neutral white light, offering optimal visual comfort.
Whakaahua 4.1: The LEXMAN LED Globe Bulb providing neutral white illumination in a living room setting, demonstrating its application in a floor lamp.
Whakaahua 4.2: Visual representation of various light temperatures. The top-left quadrant, marked with a check, illustrates the 4000K neutral white light output of this LEXMAN bulb, which is dynamic and close to daylight.
5. Tiaki
The LEXMAN LED Filament Globe Bulb requires minimal maintenance:
- Te horoi: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as they may damage the bulb.
- Rokiroki: If storing the bulb, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.
6. Te Raru
If your LEXMAN LED Filament Globe Bulb is not functioning as expected, try the following:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| E kore e marama te rama. | Kaore he mana ki te huringa. | Check the circuit breaker or fuse. Ensure the light switch is on. |
| Kaore i tika te whakakii i te rama. | Turn off power, then carefully re-screw the bulb into the socket until snug. | |
| He pūrama, he rama rānei kua pakaru. | Test the bulb in another working fixture. If it still doesn't light, the bulb may be faulty. If other bulbs work in the fixture, the fixture may be faulty. | |
| Ka whiti te topuku. | Whakawhiti dimmer hotokore. | This bulb is not designed for dimming. Remove the dimmer switch or replace it with a standard switch. |
| Hononga wewete. | Turn off power, then carefully re-screw the bulb into the socket. |
Mena ka mau tonu te raru i muri i te whakamatau i enei otinga, tena koa whakapā atu ki te tautoko a te kaihoko.
7. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | LEXMAN |
| Tau tauira | 3276007280630 |
| Kaihanga | ADEO |
| Rahi Hua (L x W x H) | 10 x 9.5 x 14 cm |
| Taumaha Tūemi | 110 karamu |
| Te nui | 1 |
| Tae Maama | Ma Kupapa (4000K) |
| Hanga | Globe (G95) |
| Voltage | 240 Volts |
| Momo Potae | E27 |
| Rerewharewha | 1055 rama |
| Wat LEDtage | 7.8 Watts |
| Whakataurite andrite | 75 Watts |
| Roanga Toharite | 15,000 haora |
| Inamata Ka | 95% intensity in <0.5 seconds |
| Karekau | No (not specified as dimmable) |
| Nga Pikohiko e hiahiatia ana | Kao |
Whakaahua 7.1: Product packaging for the LEXMAN LED Filament Globe Bulb, displaying specifications such as 4000K, E27, 1055 lumens, 7.8W (75W equivalent), 15,000 hours lifespan, and a 5-year warranty.
8. Pūtāhui me te Tautoko
Pūtāhui: This LEXMAN LED Filament Globe Bulb comes with a 5-tau pūtāhui, ensuring its quality and durability. The average lifespan of the bulb is rated at 15,000 hours, which translates to over 13 years of use based on approximately 3 hours per day.
Tautoko Kiritaki: For technical assistance, warranty claims, or any questions regarding your LEXMAN product, please refer to the contact information provided on your purchase receipt or the official LEXMAN webpae. Tena koa kia rite to nama tauira (3276007280630) me te tohu o te hoko ina whakapā atu ki te tautoko.
