REBEL RB-0003 3-in-1 Detector User Manual

Tauira: RB-0003

1. Kupu Whakataki

Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.

The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.

2. Nga korero haumaru

Always exercise caution when working near detected objects.
Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
Puritia kia maroke, kia ma hoki te taputapu. Kaua e whakaaturia ki te makuku, ki te pāmahana tino kino rānei.
Kaua e ngana ki te whakatuwhera, ki te whakarereke ranei i te taputapu. Ma nga kaimahi mohio anake e whakatika.
Tangohia nga pākahiko ki te kore te taputapu e whakamahia mo te wa roa.

3. Hua Neke Atuview

Familiarize yourself with the components of your REBEL RB-0003 detector:

REBEL RB-0003 3-in-1 Detector in its retail packaging, showing the front of the device with its display and 'SELECT' button.

Whakaahua 1: Mua view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.

Back of the REBEL RB-0003 3-in-1 Detector, showing the battery compartment cover and product label with model number MIE-RB-0003.

Whakaahua 2: Whakamuri view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.

Whakaatu Mata: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
PONO PAIA: Used to switch between detection modes (Metal, Wood, AC Cable).
Rohe Pūoko: Located on the back of the device, this area must be flush against the surface for accurate readings.
Wāhanga Pūhiko: Located on the back, for battery installation.

4. Tatūnga

4.1. Tāuta Pūhiko

Open the battery compartment cover on the back of the device (refer to Figure 2).
Whakauruhia nga pākahiko e hiahiatia ana, me te whakarite kia tika te polarity (+/-). Ka hiahia te taputapu ki nga pākahiko mo te mahi.
Katia kia mau te uhi o te wahanga pākahiko.

The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.

5. Nga Tohutohu Whakahaere

5.1. Mahi Whanui

Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
Pehia te KORERO button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.

5.2. Te Kimi i te Mea Whakarewa

In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.

Select the Metal detection mode.
Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
A distinct audio alert or visual indicator will confirm the presence of metal.

5.3. Wood Detection

The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.

Switch to Wood detection mode.
Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
Mark the detected areas for reference.

5.4. AC Cable Detection

The RB-0003 is capable of detecting live AC 90-250V cables.

Select the AC Cable detection mode.
Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltagka kitea e.
Tupato: Always assume wires are live until confirmed otherwise by a qualified electrician.

6. Tiaki

Te horoi: Horoia te taputapu ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga kai horoi me nga whakarewa.
Rokiroki: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
Whakakapinga Pūhiko: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.

7. Te Raru

Raruraru	Take pea	Rongoā
Kaore e tahuna te taputapu.	Nga pākahiko kua mate, kua he ranei te whakaurunga.	Tirohia te polarity pākahiko whakakapi ranei pākahiko.
Ko nga panui kore tika.	Low battery, improper contact with surface, or environmental interference.	Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields.
No detection in AC mode.	Wires are not live, or too deep.	Ensure power is on to the circuit. Scan slowly and thoroughly.

8. Whakatakotoranga

Āhuahira	Taipitopito
Tau tauira	RB-0003 (MIE-RB-0003)
Waitohu	REBEL
Te Hōhonutanga o te Kitenga o te Metara	Tae atu ki te 30 mm
Wood Detection Depth	Up to 18 mm (for 30x30 mm profiles)
AC Cable Detection	90-250V
Rahi Whakaatu	51 x 25 mm
Tohu Pūhiko Iti	Ae
Puna Mana	Pūhiko Powered
Hunga Hua	15.5 x 5.4 x 2.7 cm
Taumaha Tūemi	157 Karamu
Whakatauranga Tiaki o te Ao	IP66

9. Pūtāhui me te Tautoko

REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webpae.

For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webpae.

	Mita Maha Mamati Rebel MIE-RB-33B, C, D Pukapuka Kaiwhakamahi He pukapuka kaiwhakamahi mō ngā tauira Rebel Digital Multimeter MIE-RB-33B, MIE-RB-33C, me MIE-RB-33D. Kei roto ko ngā tohutohu haumaru, te whakaahuatanga hua, te aratohu whakahaere, ngā whakaritenga, me ngā mōhiohio tiaki.
	Rebel UPS Uninterruptible Power Supply Pukapuka Kaiwhakamahi RB-4020-5 Pukapuka Kaiwhakamahi mo Rebel Uninterruptible Power Supply (UPS) tauira RB-4020, RB-4021, RB-4022, RB-4023, RB-4024, RB-4025. Kei roto ko nga whakatupato haumaru, te whakataki, nga whakaritenga, te rapu raruraru, me nga korero tuku tika.
	Manual de Utilizare Rebel RB-4026, RB-4027, RB-4028 - Invertor de Putere Kua oti te whakamahi, te whakauru me te whakaurunga o te rebel ki te rebel me te sinusoidală pură me te mahi a te încărcare. Whakauruhia nga tohu tohu, te kowhiri i te pākahiko me nga taputapu motuhake.
	Pukapuka Kaiwhakamahi mō te Rebel MIE-RB-55 Digital Multimeter He pukapuka kaiwhakamahi whānui mō te Rebel MIE-RB-55 Digital Multimeter, e kapi ana i ngā tohutohu haumaru, te whakaahuatanga hua, te whakamahinga, te tiaki, me ngā whakatakotoranga hangarau.
	Rebel RB-1003 Cordless Screwdriver Manual Kaiwhakamahi Get detailed instructions and safety information for the Rebel RB-1003 Cordless Screwdriver. This user manual covers operation, maintenance, and troubleshooting for your Rebel tools.
	Instrukcja Obsługi Nożyc Akumulatorowych do Żywopłotu Rebel RB-5001.1 Odkryj instrukcję obsługi dla nożyc akumulatorowych do żywopłotu Rebel RB-5001.1. Dowiedz się o bezpiecznym użytkowaniu, konserwacji i danych technicznych tego narzędzia ogrodowego.

REBEL RB-0003