Tohu Ipurangi Rebel KOM1030 AmpAwhina Kaiwhakamahi lifier

Kupu Whakataki

This manual provides instructions for the proper installation, operation, and maintenance of your Rebel KOM1030 Wi-Fi Signal Amplifier. This device is designed to extend the coverage of your existing Wi-Fi network, providing a stronger and more reliable wireless signal in areas with weak or no coverage.

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier shown with an Ethernet cable and a separate power adapter, illustrating the product and its basic components.

Ihirangi mokete

Me mohio kei roto katoa nga mea kei roto i te kete:

• Tohu Ipurangi Rebel KOM1030 Ampkaikawe
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Nga waahanga matua

• Supports up to 10 simultaneous users.
• Operates on 2.4 GHz frequency band.
• Data transfer rate up to 300 Mbit/s.
• Wireless range up to 100 meters (328 feet).
• Equipped with 2 integrated antennas.

Whakaahua: Mua view of the Rebel KOM1030 Wi-Fi Signal Amplifier, showing the WPS button and indicator lights.

Tohutohu Tatūnga

1. Hononga Tinana

1. Wewetehia te Pūrere: Carefully remove the Rebel KOM1030 from its packaging.
2. Mono Mai: Insert the device directly into a standard electrical outlet. Ensure it is securely plugged in.

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier plugged into a wall power outlet, demonstrating proper physical connection.

2. Tikanga Whirihoranga

The Rebel KOM1030 can be configured using two primary methods: WPS (Wi-Fi Protected Setup) or via a web pūtirotiro.

Method A: WPS Setup (Recommended for compatible routers)

1. Whakahiko: Plug the Rebel KOM1030 into a power outlet near your main router.
2. Whakahohe WPS i runga Pouara: Press the WPS button on your main Wi-Fi router. Refer to your router's manual for the exact location and procedure.
3. Whakahohehia te WPS i runga i te Repeater: Within two minutes, press the WPS button on the Rebel KOM1030. The WPS indicator light on the repeater should start blinking.
4. Tatari mo te Hononga: The devices will attempt to establish a connection. Once connected, the Wi-Fi indicator light on the repeater will become solid.
5. Hunuku (Kōwhiringa): After successful setup, you can unplug the repeater and move it to a more central location between your router and the area needing extended coverage.

Whakaahua: Taha view of the Rebel KOM1030, highlighting the WPS button and the LAN port, which are crucial for setup and wired connections.

Tikanga B: Web Tatūnga Pūtirotiro

1. Whakahiko: Plug the Rebel KOM1030 into a power outlet.
2. Hono atu ki te Wi-Fi a te Kaiwhakahoki: On your computer or mobile device, connect to the Wi-Fi network broadcast by the repeater (e.g., "Rebel_Repeater" or similar, check the device label if available). This network will not have internet access initially.
3. Urunga Web Atanga: Tuwhera a web pūtirotiro ka tāuru i te wāhitau IP taunoa (hei tauira, http://192.168.10.1) or domain name (e.g., http://rebelrepeater.net). Refer to the device label or packaging for the exact address.
4. Takiuru: Enter the default username and password (commonly "admin" for both, or as specified on the device label).
5. Tīpako Aratau: Choose "Repeater Mode" or "Extender Mode" from the setup wizard.
6. Matawai mo nga Whatunga: The repeater will scan for available Wi-Fi networks. Select your main Wi-Fi network from the list.
7. Whakauru Kupuhipa: Input the password for your main Wi-Fi network.
8. Configure Repeater SSID (Optional): You can choose to keep the same network name (SSID) as your main router or create a new one (e.g., "YourNetwork_EXT").
9. Hoatu Tautuhinga: Save the settings and wait for the repeater to restart.
10. Manatokohia te Hononga: Once restarted, the Wi-Fi indicator light should be solid, indicating a successful connection.

3. Te Whakaritenga Pai

For best performance, place the Rebel KOM1030 in a location that is:

• Approximately halfway between your main router and the area where you need improved Wi-Fi coverage.
• Within the range of your existing Wi-Fi network, where the signal is still strong and stable.
• Away from large metal objects, concrete walls, microwaves, and other devices that may cause interference.

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier mounted on a wall, demonstrating a typical placement for extending Wi-Fi coverage.

Image: An overhead floor plan illustrating how a Wi-Fi repeater extends network coverage from a central router to previously uncovered areas.

Te whakahaere i te Pūrere

Once configured, the Rebel KOM1030 operates automatically to extend your Wi-Fi signal. Observe the indicator lights for status information.

Maama Tohu

• Tohu Hiko: E tohu ana te rama mārō kua whakakāhia te pūrere.
• Tohu Wi-Fi:
  • Solid: Successfully connected to the main Wi-Fi network and extending signal.
  • Blinking: Attempting to connect or WPS pairing in progress.
  • Off: No Wi-Fi connection or device is not configured.
• Tohu LAN: Solid or blinking light indicates an active connection through the Ethernet port.

Whakamahi Tauranga Itarangi

The integrated LAN port allows you to connect a wired device (e.g., a desktop computer, gaming console, or smart TV) to the repeater, providing network access to devices that do not have Wi-Fi capabilities or for a more stable connection.

Te tiaki

• Te horoi: Whakamahia he kakahu maeneene, maroke hei horoi i te taputapu. Kaua e whakamahia nga kai horoi wai, aerosol ranei.
• Whakahōu Firmware: Tirohia i ia wa i te kaihanga website for firmware updates. Updates can improve performance, add features, or fix bugs. Refer to the manufacturer's instructions for updating firmware.
• Tautuhi Anō i te Pūrere: If the device is not functioning correctly, you may perform a factory reset. Locate the "Reset" button (often a small pinhole) on the device. With the device powered on, use a paperclip or similar pointed object to press and hold the Reset button for approximately 5-10 seconds until the lights flash. The device will revert to factory default settings, requiring re-configuration.

Raparongoā

Kāore he urunga ki te ipurangi i muri i te tatūnga

• Ensure the repeater is within range of your main router and receiving a strong signal.
• Manatokohia he hononga ipurangi kaha to pouara matua.
• Re-run the setup process, ensuring the correct Wi-Fi network and password are selected.
• Try relocating the repeater to a different power outlet or a more optimal position.

Tere Hononga Pōturi

• The repeater might be too far from the main router. Move it closer to improve signal strength.
• Tirohia mēnā he pokanoa mai i ētahi atu taputapu hiko (hei tauira, ngā ngaruiti, ngā waea ahokore).
• Me whakarite kei te tere te tere o tō pouara matua.
• Consider connecting wired devices directly to the repeater's LAN port for potentially better performance.

WPS Setup Fails

• Ensure you press the WPS button on both the router and the repeater within the specified time frame (usually 2 minutes).
• Some routers may require WPS to be enabled in their settings.
• Ki te kore tonu e angitu te WPS, whakamahia te web tikanga whakarite pūtirotiro.

Kaore e taea te uru Web Whārangi Whakahaere

• Ensure your device is connected to the repeater's Wi-Fi network (not your main router's).
• Verify the IP address or domain name entered in the browser is correct.
• Whakamātauria te whakawātea i te keteroki o tō pūtirotiro me te whakamahi i tētahi atu pūtirotiro.
• Perform a factory reset on the repeater and try again.

Whakatakotoranga

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier displayed alongside its key technical specifications, including IEEE 802.11 b/g/n, 2.4 GHz frequency, and 300 Mb/s data rate.

Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Rebel brand webpae. Tērā pea ka rerekē ngā tikanga motuhake o te pūtāhui i runga i te rohe me te kaihokohoko.

Whakapā Tautoko: If you encounter issues not covered in this manual, please contact Rebel customer support through their official channels.