AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Hua Neke Atuview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Āhuatanga matua:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Whakatakotoranga

3. Aratohu Tatūnga

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Te Wetewete

1. Tangohia marietia te pouaka rorohiko mai i tōna takai.
2. Remove any protective films or internal packaging materials.
3. Whakatakotoria te pouaka ki runga i tētahi mata pūmau, papatahi.

3.2 Whakaaturanga Papa Pouaka

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Whakamauhia te papahoahoa mā te whakamahi i ngā tīwiri kua whakaratohia.

3.3 Tāutanga Pūnaha Hiko

1. Kimihia te wāhi whakairinga hiko i te taha raro o muri o te pouaka.
2. Slide your power supply unit (PSU) into the designated bay.
3. Whakaorangia te PSU me nga wiri mai i muri o te keehi.

3.4 Te Whakanoho Puku Rokiroki

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Tangohia ngā taupoki mokowā whakawhānui e tika ana mai i te tuarongo o te pouaka.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Pūnaha whakamatao

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Whakahaere taura

Whakamahia nga tapahi ararere taura me nga tohu here ki muri i te paepae papahoahoa hei whakarite taura. Ma tenei ka pai ake te rere o te hau me te rerehua.

4. Nga Tohutohu Whakahaere

4.1 Kei te Hiko / Weto

• To power on your PC, press the Mana te paatene kei runga i te papa o runga.
• To power off, either shut down through your operating system or press and hold the Mana pātene mo etahi hēkona.

4.2 Ngā Tauranga I/O o te Paewhiri o Mua

The top panel provides convenient access to various ports:

• Tauranga USB 3.0 (x1): Mo te whakawhiti raraunga tere tere.
• Tauranga USB 2.0 (x2): Hei hono i ngā taputapu taapiri.
• Hiko Miihini: Mo te whakauru ororongo.
• HD Audio Jack: For audio output (headphones/speakers).
• Patene Tautuhi Anō: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Tiaki

Ko te tiaki i nga wa katoa ka awhina i te mahi tino pai me te roa o nga waahanga PC.

5.1 Puehu Tātari Whakapai

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Whakapai Whanui

• Horoia te taha o waho o te keehe ki te ngohengohe, damp kakahu. A ape i nga kai horoi abrasive.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Te Raru

Mena ka pāngia koe e ngā raruraru me tō rorohiko, whakaarohia ēnei mahi rapurongoā noa:

• Kore Mana: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Kāore ngā Pā e Hurihuri ana/Kāore te RGB e Mahi ana: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Te wera nui: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Kāore e Mahi ana ngā Tauranga o te Paewhiri o Mua: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Pūtāhui me te Tautoko

7.1 Nga Korero Whakaputanga

The AeroCool HEXFORMBKV2 PC case comes with a 2-tau pūtāhui for parts. Please retain your proof of purchase for warranty claims.

7.2 Tautoko Hangarau

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webte waahi kei roto ranei i te kohinga hua.

• AeroCool Official Webpae: www.aerocool.io
• Imeera Tautoko Kaihoko: support@aerocool.io (Exoample, please verify on official webpae)