Ka mutu te huaview
The Amazon Basics Full Motion TV Wall Mount is designed to provide a versatile and secure mounting solution for your television. This mount allows for optimal viewing angles with its full motion capabilities, including tilt, swivel, and extension. It is engineered for durability and ease of installation, ensuring a stable and flexible setup for your home entertainment system.
Key features include: Designed for concrete, brick and wood studs wall (single stud). Designed for TVs up to 40 lbs (18.2KG) and display sized 12" - 40" (30.5 CM - 101.6 CM). Designed for VESA sized from 75X75 MM through 200x200 MM. Comfortable View with tilt range from +15° to -5°. Articulating up range from 2.3" to 16.3" ; 180° swivel. Mounting hardware, mounting template and User manual included.
Whakatakotoranga Hangarau
| Whakatakotoranga | Taipitopito |
|---|---|
| Tau tauira | AM20A |
| Rahi TV Hototahi | 12" to 40" (30.5 CM - 101.6 CM) |
| Morahi Taumaha Rawa | 40 lbs (18.2 KG) |
| VESA Hototahi | 75x75 MM through 200x200 MM |
| Awhe Taitaha | +15° ki te -5° |
| Awhe Hurihuri | 180° |
| Toronga mai i te Taiepa | 2.3" ki te 16.3" |
| Rauemi | Korotahi Steel |
| Hunga Hua | 11.57 x 9.61 x 2.6 inihi |
| Taumaha Tūemi | 3.89 pauna |
Ihirangi mokete
Your Amazon Basics Full Motion TV Wall Mount package includes all necessary components for installation:
- TV Wall Mount Assembly (EA)
- Mounting Plate (MP)
- Wall Plate Covers (WPC-T, WPC-B)
- TV Mounting Screws (B, D, M, N, J, K)
- Concrete Anchors (U8)
- Washers (R, S)
- Spacers (Q)
- Lag Bolts (TS)
- Allen Wrench (AP)
- User Manual (UM)
- Mounting Template (IT)
- Zip Ties (O)
Tirohanga Hototahi
Before beginning installation, ensure your TV and wall are compatible with this mount.
Tauira VESA: This mount supports VESA patterns from 75x75 mm up to 200x200 mm. Measure the horizontal (W) and vertical (H) distance between the mounting holes on the back of your TV.
TV Size and Weight: The mount is designed for TVs between 12" and 40" and can support a maximum load of 40 lbs (18.2 kg).
Momo Taiepa: The mount is compatible with single wood studs, solid concrete walls, and brick walls. DO NOT MOUNT ON DRYWALL ALONE.
Aratohu Tāuta
Follow these steps carefully to install your TV wall mount. It is recommended to have a second person assist during certain steps for safety and ease of installation.
1. Identify Mounting Wall Type
Use a stud finder to locate the center of a wood stud. For concrete or brick walls, ensure the surface is solid. Place the mounting template (IT) at the desired height and mark the drilling locations. Drill pilot holes according to the instructions for your specific wall type.
2. Attaching Mounting Bracket to the Wall
Align the wall plate of the mount with the drilled holes. Secure it to the wall using the provided lag bolts (TS) for wood studs, or concrete anchors (U8) for concrete/brick. Ensure the mount is level using a spirit level.
3. Identify Mounting Pattern on TV
Measure the VESA pattern on the back of your TV. Attach the mounting plate (MP) to the TV using the appropriate screws (D) and the VESA adapters (AP) if needed, ensuring the arrows on the adapters point upwards.
4. Selecting Screw Bolt Size
Choose the correct M4, M6, or M8 screw bolts (B, D, M, N, J, K) that fit your TV's threaded holes. Use the provided washers (R, S) and spacers (Q) as necessary to ensure a snug fit without overtightening. For curved back TVs, use the appropriate screws and spacers as indicated in the manual.
5. Mounting TV Plate
Attach the TV plate to the back of your TV. Ensure the screws are tightened securely but do not overtighten to avoid damaging the TV.
6. Final Assembly and Adjustment
With assistance, mount the TV onto the wall bracket by hooking the TV plate onto the mounting bracket. Secure the TV by tightening the two bolts at the lower back of the mount assembly (EA). Adjust the tilt by loosening the angle bolts on the mounting base, setting the desired angle, and then retightening the bolts. Manage cables using the integrated cable management clips.
For precise installation, refer to the included mounting template:
Operating Your Mount
The full motion design of your Amazon Basics TV Wall Mount allows for flexible positioning to achieve the best viewing experience from anywhere in the room.
- Tapahia: Whakaritehia te poutū viewing angle from +15° to -5° to reduce glare or optimize for different seating positions. Loosen the tilt bolts, set the desired angle, and retighten.
- Hurihuri: Pivot the TV horizontally up to 180° (90° left/right) to direct the screen towards your viewrohe.
- Toronga: Pull the TV away from the wall from 2.3" up to 16.3" for closer viewing or to access cables.
Tiaki me te Tiaki
To ensure the longevity and safe operation of your TV wall mount, follow these maintenance guidelines:
- Te horoi: Horoia te papa ki te kakahu ngohengohe, maroke. Āta karohia te whakamahi i ngā kaihoroi whakakoi, i ngā whakarewa rānei ka kino pea te āhua o te papa.
- Takitaki Ia Waa: Regularly inspect all screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments can cause them to loosen.
- Nekehanga: If the mount becomes stiff or difficult to move, apply a small amount of silicone-based lubricant to the pivot points.
- Tepe Taumaha: Kaua e neke ake i te kaha o te taumaha o te 40 lbs (18.2 kg).
Raparongoā
If you encounter any issues with your TV wall mount, refer to the following common problems and their solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Mount is not level | Improper installation or loose bolts. | Check the wall plate and TV plate for levelness. Loosen and re-tighten mounting bolts while ensuring the mount is level with a spirit level. |
| Difficulty moving the mount (swivel/extension) | He kikī rawa ngā hononga, he hiahia rānei kia pania ki te hinu. | Apply a small amount of silicone-based lubricant to the moving joints. Do not use oil-based lubricants. |
| TV is tilting unexpectedly | Tilt adjustment bolts are loose. | Tighten the tilt adjustment bolts on the mounting base. |
| Ka kore e tau te Maunga | Incorrect wall type or loose wall mounting hardware. | Ensure the mount is installed on a compatible wall type (wood stud, concrete, or brick). Re-check all lag bolts/anchors for tightness. If unsure, consult a professional installer. |
Pūtāhui me te Tautoko
This Amazon Basics Full Motion TV Wall Mount comes with a 2 tau te whakamana a te kaiwhakanao.
For detailed warranty information or additional support, please refer to the official documents:
For further assistance, please visit the Amazon Basics support page or contact customer service.
