1. Kupu Whakataki
The OREI UHDS-404VW is a versatile 4K 4x4 HDMI Matrix Switch and Video Wall Controller designed to manage and distribute HDMI signals. This device allows users to switch between four HDMI input sources and display them across four HDMI output displays. It also features advanced video wall capabilities, supporting various configurations such as 2x2, 1x4, and 4x1, enabling a single source to be spread across multiple screens or multiple sources to be displayed individually. This manual provides detailed instructions for the proper installation, operation, and maintenance of your UHDS-404VW unit.
2. Ihirangi mokete
I te whakatuwheratanga o te kete, tirohia koa kei roto katoa nga mea e whai ake nei:
- 1x OREI UHDS-404VW HDMI Matrix Switch & Video Wall Controller
- 1x Pūurutau Hiko
- 1x Mana Mamao IR
- 1x RS-232 Phoenix Connector
- 1x Tauera Kaiwhiwhi IR
- 1x Mounting Ear Set
- 1x Manual Kaiwhakamahi
Image: The OREI UHDS-404VW unit with its included accessories, such as the power adapter, remote control, and various cables.
3. Hua Neke Atuview
3.1 Paewhiri Mua
Image: The front panel of the UHDS-404VW unit, displaying LED indicators for power, input status (HD A, HD B), loop status (LP A, LP B), and output status (HD 1, HD 2, HD 3, HD 4).
The front panel features a series of LED indicators that provide real-time status of the device:
- PWR LED: Ka tiaho i te wa e whakakaha ana te waeine.
- INPUT LEDs (HD A, HD B): Indicate active HDMI input sources.
- LOOP LEDs (LP A, LP B): Indicate active local loop-out connections.
- OUTPUT LEDs (HD 1-4): Indicate active HDMI output displays.
3.2 Paewhiri Whakamuri
Image: The rear panel of the UHDS-404VW unit, showing ports for LAN, RS-232 control, service (Micro USB), audio outputs (analog 3.5mm, digital Toslink), HDMI inputs (HD A, HD B), loop outputs (LP A, LP B), HDMI outputs (HD 1-4), ground, and DC 12V power input.
The rear panel houses all the necessary connection ports:
- Tauranga LAN: For network control via TCP/IP.
- RS-232 CTL Ports: For serial control via RS-232.
- SERVICE Port (Micro USB): Mo nga whakahou firmware.
- NGĀ PUTANGA Ororongo: Includes analog (3.5mm) and digital (Toslink) options for external audio systems.
- HDMI INPUTS (HD A, HD B): Connect your HDMI source devices.
- LOOP OUT Ports (LP A, LP B): For local monitoring of input signals.
- HDMI OUTPUTS (HD 1-4): Connect to your display monitors for video wall or matrix configurations.
- TUAKI: tauranga papa whenua.
- DC 12V: Whakauru hiko mo te urutau hiko whakauru.
4. Tohutohu Tatūnga
Follow these steps to set up your OREI UHDS-404VW:
- Connect HDMI Output Displays: Connect your four display monitors to the HDMI OUTPUTS (HD 1-4) on the rear panel of the UHDS-404VW. Ensure correct sequencing for video wall functionality (e.g., top-left to HD1, top-right to HD2, bottom-left to HD3, bottom-right to HD4 for a 2x2 setup).
- Connect HDMI Input Sources: Connect your HDMI source devices (e.g., Blu-ray player, gaming console, laptop) to the HDMI INPUTS (HD A, HD B) on the rear panel.
- Connect Local Loop Out (Optional): If you wish to monitor the input signal locally, connect an additional monitor to one of the LOOP OUT ports (LP A or LP B).
- Honoa te Putanga Ororongo (Whiringa): If using external audio, connect your amplifier or audio system to the desired AUDIO OUTPUT (analog or digital).
- Connect Control (Optional): For advanced control, connect an Ethernet cable to the LAN port for TCP/IP control, or use the provided RS-232 Phoenix connector for serial control.
- Hoatu Mana: Connect the included 12V DC power adapter to the DC 12V port on the rear panel and plug it into a standard wall outlet. The PWR LED on the front panel will illuminate, and the unit will perform a self-test.
Whakaahua: Example of a 4x4 matrix configuration, where each of the four input sources is displayed on a different output screen.
Whakaahua: Example of a 2x2 video wall configuration, where a single input source is seamlessly displayed across four screens.
5. Aratau Mahi
The UHDS-404VW supports multiple display modes, configurable via the IR remote, Web GUI, or RS-232 commands:
- 2x2 Video Wall: A single source is displayed across four screens, forming one large image.
- Aratau Pouaka: Each display shows a different source, allowing for independent viewing.
- 1x2 Horizontal: One source displayed on two horizontal screens, or two sources on two displays each.
- 2x1 Vertical: One source displayed on two vertical screens, or two sources on two displays each.
- 1x3 Horizontal: Three displays spread horizontally.
- 1x4 Horizontal: Four displays spread horizontally.
- 3x1 Vertical: Three displays spread vertically.
- 4x1 Vertical: Four displays spread vertically.
Image: Visual representation of the ten different output mode settings available for the UHDS-404VW, demonstrating various ways to arrange content across multiple screens.
5.1 Bezel Adjustment
The unit's software allows for horizontal and vertical bezel adjustment to minimize the visible lines where displays overlap in video wall configurations. This feature helps create a more seamless viewte wheako.
Image: The UHDS-404VW unit with its remote control, illustrating the concept of horizontal and vertical bezel adjustment for optimizing video wall displays.
6. Whakatakotoranga
- Ngā Tāuru: 4 HDMI
- Putanga: 4 HDMI
- Tautoko Tautuhinga: Up to 4K@60Hz 4:4:4 (4096x2160), backward compatible with 1080p/720p.
- HDMI Standard: HDMI 2.0
- Tautukunga HDCP: HDCP 2.2
- Tautoko Ororongo: Pass-through for PCM, Dolby Digital, Dolby TrueHD, DTS-HD Master.
- Kōwhiringa Mana: IR Remote, Front Panel buttons, TCP/IP, RS-232.
- Local Loopback Function: Allows monitoring of input content.
- Whakahaere EDID: Advanced EDID settings for device compatibility.
- Ahu: 14 x 1.25 x 3 inihi
- Taumaha Tūemi: 2 pauna
- Whakapiri: Full metal for durability.
7. Te Raru
If you encounter issues with your OREI UHDS-404VW, please refer to the following common troubleshooting steps:
- Kāore he Ataata/Ororongo: Ensure all HDMI cables are securely connected and are of high quality (HDMI 2.0 or higher for 4K content). Verify that the power adapter is correctly connected and the PWR LED is illuminated. Check the input and output status LEDs on the front panel.
- Incorrect Display/Resolution: Confirm that your source device and displays support the selected resolution. Utilize the EDID management features via the control software to optimize compatibility.
- Video Wall Alignment Issues: Use the bezel adjustment feature in the control software to fine-tune the alignment of your video wall displays. Ensure monitors are physically arranged correctly.
- Nga Take Mana: Verify network connectivity for TCP/IP control or serial cable connection for RS-232. Ensure the correct control software/commands are being used.
- Whakahoutanga Firmware: If persistent issues occur, check the OREI website for the latest firmware updates and follow the provided instructions for updating via the SERVICE port.
8. Tiaki
To ensure the longevity and optimal performance of your UHDS-404VW, follow these maintenance guidelines:
- Te horoi: Use a soft, dry cloth to clean the unit. Avoid using liquid or aerosol cleaners.
- Whakahau: Ensure the unit has adequate ventilation. Do not block the ventilation slots on the sides to prevent overheating.
- Rokiroki: Penapenahia te waeine ki te wāhi hauhautanga, maroke hoki, kia matara atu i te rā tika me ngā pāmahana tino kino ina kore e whakamahia mō te wā roa.
- Whakaha Uepu: Puritia nga taura kia kore e pakaru, kia kore e pakaru.
9. Pūtāhui me te Tautoko
The OREI UHDS-404VW comes with a 1 Tau Katoa te Rarangi. For technical assistance or warranty claims, please contact OREI Support. Refer to the included warranty card for detailed terms and conditions.
10. How-To Video
For a visual guide on setting up and using your OREI UHDS-404VW, please watch the official instructional video below:
Video: An instructional video demonstrating the unboxing, features, and setup of the OREI UHD-204VW (UHDS-404VW) Video Wall Processor.
