Kupu Whakataki
Thank you for choosing the FLYLINKTECH Car Jump Starter with Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before use to ensure safe and optimal operation.
Ka mutu te huaview
The FLYLINKTECH CF700 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 24000mAh power bank, and an emergency LED light. It is suitable for all gas engines and diesel engines up to 8.0L.
Figure 1: What's in the Box - The jump starter unit, smart jumper cables, air hose with various nozzles, USB charging cable, and carrying case.
Nga waahanga matua
- Battery Starter: 2500A peak current, 1200A starting current, capable of starting all gas and 8.0L diesel engines.
- Peeke Mana: 24000mAh capacity with 2 USB outputs (one Quick Charge) and a DC 12-16.8V / 10A port for charging various devices and car accessories.
- Tire Compressor: Powerful 150 PSI inflator with a digital display for setting desired pressure and automatic shut-off. Includes pins for inflating balls, rubber boats, and mats.
- Rama LED ohorere: 5W bright LED light with multiple modes (stable, SOS, strobe) for emergency situations, night breakdowns, or repairs.
- 12V turanga: Connects various car accessories such as additional USB chargers or car fans.
- Pūnaha Tiaki Ataata: Features short circuit protection, high/low temperature protection, reverse connection protection, surge voltage tiaki, teitei voltage protection, and over discharge protection.
Whakaatu 2: Neke Atuview of the multi-functional features of the device.
Nga korero haumaru
Always follow these safety guidelines to prevent injury or damage to the device and vehicle:
- Panuihia nga tohutohu katoa i mua i te whakamahi i te hua.
- Kaua e rukuhia te hua ki te wai.
- Kaua e whakahaeretia te hua i roto i nga hau pupuhi, penei i te waahi o te wai ka mura, te hau, te puehu ranei.
- Kaua e taea e nga tamariki.
- Ensure proper polarity connection when jump-starting to avoid sparks and damage. The smart clamp provides protection against reverse connection.
- Do not touch the air hose connector immediately after prolonged inflation, as it may be hot.
Figure 3: The device incorporates multiple safety protections for user and vehicle safety.
Tatūnga
Te utu i te Pūrere
Before first use, fully charge the jump starter. Use the provided USB-C charging cable to connect the device to a compatible USB power adapter (not included). The digital display will indicate the charging status. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.
Nga Tohutohu Whakahaere
1. Peke Timata i te Waka
- Me whakarite kia rawaka te utu o te peke tīmata.
- Connect the smart jumper cables to the jump starter's jumping port.
- Whakapirihia te cl wheroamp ki te tauranga pai (+) o te pākahiko o te waka.
- Apitihia te pango clamp to the negative (-) terminal of the vehicle's battery. The smart clamp will indicate a safe connection (e.g., green light).
- Tīmatahia te pūkaha o te waka.
- Once the engine starts, immediately remove the clamps from the battery, then disconnect the smart jumper cables from the jump starter.
Figure 4: Proper connection for jump starting a vehicle.
Video 1: Demonstration of jump starting a vehicle using a similar device. The video shows connecting the clamps to the battery and starting the car.
2. Tire Inflation
- Screw the air hose into the designated port on the jump starter.
- Attach the air hose nozzle securely to the tire valve stem.
- Turn on the device and select the desired pressure unit (PSI, BAR, KPA).
- Use the '+' and '-' buttons to set the target tire pressure.
- Press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
- Disconnect the air hose from the tire valve and then from the jump starter.
Figure 5: The device connected to a car tire for inflation.
Video 2: A seller demonstration of the car jump starter's air compressor function, showing how to connect and inflate a tire.
3. Te Whakamahi hei Pēke Hiko
Connect your electronic devices (phones, tablets, etc.) to the USB output ports or car accessories to the DC 12-16.8V / 10A port for charging.
Figure 6: The device being used to charge multiple electronic devices.
4. Te Whakamahi i te Rama LED
Press and hold the light button to turn on the LED light. Short presses will cycle through different modes: stable light, SOS signal, and strobe light. Press and hold again to turn off.
Figure 7: The device's LED light providing illumination in a dark setting.
Te tiaki
- Kia ma, kia maroke te taputapu.
- Penapena ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me ngā pāmahana tiketike.
- Recharge the device at least once every 3-6 months to prevent deep discharge and prolong battery life.
- Inspect cables and accessories for any damage before each use.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Device does not turn on/charge | Battery completely depleted or charging cable/adapter faulty. | Ensure charging cable and adapter are working. Try a different charging source. Allow sufficient time for initial charge. |
| Vehicle does not jump start | hē clamp connection, insufficient device charge, or vehicle battery severely damaged. | Tirohia clamp polarity and ensure secure connection. Fully charge the jump starter. Consult a mechanic if vehicle battery is beyond jump-starting. |
| Karekau te hau compressor e pupuhi ana | Air hose not securely attached, incorrect pressure setting, or device not powered on. | Ensure air hose is tightly screwed in and nozzle is secure on valve. Verify pressure setting and device power. |
| Air compressor stops prematurely | Preset pressure reached (automatic shut-off). | This is normal operation. Check the current tire pressure. |
Whakatakotoranga
- Waitohu: FLYLINKTECH
- Tauira: CF700
- Taumata o nāianei: 2500A
- Tīmata Onāianei: 1200A
- Raukaha Pūhiko: 24000mAh
- Momo Ratonga Waka: Passenger Car (All Gas or 8.0L Diesel)
- Te Pēhanga o te Pūwero Hau: 150 PSI
- Putanga USB: 2 ports (one Quick Charge)
- Huinga DC: 12-16.8V / 10A
- Taumaha Tūemi: 5.74 pauna
- Rahi Hua: 8.66 x 6.69 x 3.35 inihi
- Hanganga Pūtau Pūhiko: Lithium Ion
- Voltage: 12 Volts
Pūtāhui me te Tautoko
Ka tae mai tenei hua me te 24-Months Global Warranty. FLYLINKTECH is committed to providing Life Time After-sale Service & Technical Support. For any inquiries or assistance, please contact FLYLINKTECH customer service.
