Moen MotionSense Wave Touchless Pulldown Kitchen Faucet Instruction Manual

1. Hua Neke Atuview

The Moen MotionSense Wave Touchless Pulldown Kitchen Faucet combines modern design with advanced functionality for a convenient kitchen experience. This faucet features hands-free activation, a pull-down spray wand with Power Clean technology, and a Spot Resist Stainless finish.

Āhuatanga matua:

• MotionSense Wave Touchless Activation: Allows for hands-free operation by simply waving your hand.
• Pulldown Spray Wand: Provides flexibility and extended reach for various tasks.
• Power Clean Spray Technology: Delivers a more concentrated spray for faster cleaning.
• Reflex System: Ensures smooth operation and secure docking of the spray wand.
• Spot Resist Stainless Finish: Resists fingerprints and water spots, simplifying cleaning.
• Single Handle Design: For easy temperature and flow control.
• Single Hole Mounting: I hangaia mo te whakaurunga ngawari.

Image 1.1: Moen MotionSense Wave Touchless Pulldown Kitchen Faucet with deck plate and soap dispenser.

2. Nga korero haumaru

Please read all instructions carefully before installation and use. Failure to follow these instructions could result in property damage or personal injury.

• Whakawetohia te pūnaha wai matua i mua i te tīmatanga o tētahi tāutanga, o tētahi mahi tiaki rānei.
• Me whakarite kia mau nga hononga katoa kia kore ai e pakaru.
• Mena kaore koe i te tino mohio mo tetahi waahanga o te mahi whakaurunga, me toro atu ki tetahi tohunga paipa.
• The faucet requires batteries for touchless operation. Ensure batteries are installed correctly and replaced when necessary to maintain functionality.
• Keep the sensor area clear of obstructions to prevent unintended activation.

3. Tatūnga me te Tāuta

This faucet is designed for single-hole deck mount installation. It can be installed with or without the included deck plate.

Utauta e hiahiatia ana (Kaore i whakauruhia):

• Kowiri ka taea te whakarite
• Panikitini Piri
• Te putty a te paramu, te hiri silicone rānei
• rama rama
• Peere
• Tauera

Hipanga Tāuta:

1. Whakaritea te Totohu: Turn off the water supply at the main shut-off valves. Clear the area under the sink. Remove any existing faucet.
2. Tāutahia te Pereti Papa (Whiringa): If using the deck plate, apply plumber's putty or silicone sealant around the underside edge of the deck plate and place it over the sink holes.
3. Maunga te Korere: Insert the faucet body through the center hole in the sink (and deck plate, if used). From underneath the sink, secure the faucet with the provided mounting hardware (washer and mounting nut). Tighten securely.
4. Honoa ngā raina wai: Connect the hot and cold water supply lines from the faucet to your home's hot and cold water valves. Ensure connections are tight but do not overtighten.
5. Install Soap Dispenser: Insert the soap dispenser through its designated hole. Secure from underneath with the provided nut. Fill with liquid soap.
6. Tāuta Pūhiko Pūhiko: The touchless feature requires power. Install the specified batteries into the battery pack. Secure the battery pack in an accessible location under the sink, away from direct water exposure.
7. Connect Sensor Cable: Connect the sensor cable from the faucet to the control box/battery pack.
8. Whakamātautau mō ngā turuturu: Slowly turn on the main water supply. Check all connections for leaks. Run the faucet (both manual and touchless) to ensure proper operation and flush out any debris.

Image 3.1: Faucet with pull-down spray wand extended, illustrating hose flexibility.

4. Nga Tohutohu Whakahaere

The Moen MotionSense Wave faucet offers both touchless and manual operation.

4.1 Touchless Activation (MotionSense Wave)

• To activate water flow, wave your hand approximately 1-2 inches in front of the sensor located on the side of the faucet base.
• Wave your hand again to turn off the water.
• The water temperature for touchless activation is set by the position of the manual handle. Adjust the handle to your desired temperature before using the touchless feature.
• The touchless feature will automatically shut off after a period of inactivity to conserve water and battery life.

4.2 Mahi-a-ringa

• To operate manually, use the single handle on the side of the faucet.
• Lift the handle to turn on the water and control flow rate.
• Nekehia te kakau ki maui mō te wai wera, ki matau hoki mō te wai matao.
• Push the handle down to turn off the water.

4.3 Pulldown Spray Wand

• Gently pull down the spray wand from the faucet spout.
• Press the button on the spray wand to switch between stream and Power Clean spray modes.
• When finished, guide the spray wand back into the spout. The Reflex system ensures it docks securely.

Image 4.1: Demonstrating manual operation and water flow from the faucet.

5. Tiaki

Regular maintenance will ensure the longevity and optimal performance of your faucet.

5.1 Cleaning the Faucet

• The Spot Resist Stainless finish is designed to resist fingerprints and water spots.
• Horoia te pūwero i ia wā ki te wai ngohengohe,amp kakahu me te hopi ngawari.
• A ape i nga kai horoi, nga matū kino, me nga papa horoi, ka taea e enei te kino te whakaoti.
• For stubborn water spots, a solution of equal parts white vinegar and water can be used, followed by rinsing and drying.

5.2 Whakakapinga Pūhiko

• The touchless feature is powered by batteries located in a battery pack under the sink.
• When batteries are low, the faucet may exhibit reduced sensor responsiveness or a chirping sound.
• To replace batteries, locate the battery pack, open it, and replace all old batteries with new ones of the specified type (typically AA or D batteries, refer to the battery pack for exact type).
• Me whakarite kia tika te polarity i te wa e whakauru ana i nga pākahiko hou.
• After replacing batteries, the system may need a moment to reset.

6. Te Raru

Mena ka pāngia koe e ngā raruraru me tō pūwero, tirohia ngā raruraru me ngā otinga e whai ake nei:

• No Water Flow (Touchless):
  • Check if the manual handle is in the OFF position.
  • Ensure the water supply valves are fully open.
  • Verify that the battery pack has fresh batteries and is properly connected.
  • Clean the sensor area to ensure no obstructions.
• No Water Flow (Manual):
  • Tirohia mēnā kei te wātea te puna wai matua.
  • Ensure the hot and cold water supply lines are not kinked or blocked.
• Te Pēhanga Wai ngoikore:
  • Check if the aerator is clogged. Unscrew the aerator from the spray wand and clean any debris.
  • Me whakarite kia tuwhera katoa ngā takirere wai.
• Flickering or Unintended Activation:
  • Ensure the sensor area is clean and free from reflective surfaces or objects.
  • Avoid placing objects too close to the sensor.
• Te Oro Whakatangitangi:
  • This typically indicates low batteries. Replace the batteries in the battery pack.
• Spray Wand Does Not Retract Fully:
  • Check for obstructions under the sink that might be interfering with the hose and weight.
  • Ensure the weight on the hose is positioned correctly.

If problems persist after troubleshooting, contact Moen customer support.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Moen webpae. Puritia to tohu hoko mo nga kereme whakamana.

Mōhiohio Whakapā:

• Kaihanga: Moen
• For specific support, visit www.moen.com whakapā atu rānei ki tā rātou ratonga kiritaki.