1. Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
Nga waahanga matua
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- Paepae Taha Karahe Maamaa: A 4mm thick tempered glass side panel provides a clear view of your internal components.
- Extensive Radiator Support: Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- Papamatua Hototahi: Ka tautokona ngā papahoahoa ATX, Micro-ATX, me Mini-ITX.
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. Tatūnga me te Tāuta
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Cooling System Configuration
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- Mua: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- Runga: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- muri: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- Hiko Hiko Hiko: Supports 2 x 120mm fans.
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 Te Whakaritenga Wae
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- Papamatua: Supports ATX motherboards (up to 305mm x 275mm).
- Matao CPU: Teitei mōrahi o te 170mm.
- Kāri Whakairoiro (GPU): Te roa mōrahi o te 340mm.
- Tuku Hiko (PSU): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- Rokiroki: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
Whakaahua 7: He roto view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
Ataata 1: Kua mutu te manaview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. Nga Tohutohu Whakahaere
3.1 I/O Panel Functions
The top I/O panel provides convenient access to essential controls and ports.
- Pātene Hiko: Ka whakakā, whakaweto rānei i te pūnaha.
- Pātene Mana LED: Cycles through various ARGB lighting modes for the included fans.
- Patene Tautuhi Anō: Ka whakaara ano i te punaha.
- Tauranga USB 3.0 (x2): Mo te whakawhiti raraunga tere tere.
- MIC/HD-AUDIO Jacks: Hei hono i ngā paneoro me ngā hopuoro.
Whakaatu 8: Taipitopito view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 ARGB Mana Mana
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- Motherboard Synchronization: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasinōna āheinga rama ARGB kanapa.
4. Tiaki
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- Tātari Puehu: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- Case Exterior: Horoia nga mata o waho ki te ngohengohe, damp kakahu. A ape i te kai horoi, te whakarewa ranei.
- Paewhiri Karaehe Tempered: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- Horoi o roto: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. Te Raru
This section addresses common issues you might encounter with your Antec NX700 case.
5.1 Fans Not Spinning or Lighting Up
- Hononga Hiko: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- Hononga ARGB: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Pūmanawa Papa Matua: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Tūhono Molex: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 No Power to System
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- Tūhono Paewhiri Mua: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. Whakatakotoranga
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | Antec |
| Rangatū | NX700 |
| Ingoa Tauira | NX700 |
| Tauira Tuemi | 0-761345-81072-2 |
| Momo Take | Huarahi Maaka |
| Papamatua Hototahi | ATX, Micro ATX, Mini ITX |
| Rauemi | SPCC + Plastic, Tempered Glass |
| Rahi Hua (LxWxH) | 17.32 x 8.66 x 19.37 inihi (440 x 220 x 492 mm) |
| Taumaha Tūemi | 15.84 pauna (7.2 Kirokaramu) |
| Kei roto nga Kaiwhaiwhai | 2 x 185mm ARGB (Front), 1 x 120mm ARGB (Rear) |
| Tuhinga o mua Fan | 3 x 120mm / 3 x 140mm / 2 x 185mm |
| Top Fan Support | 2 x 120mm / 2 x 140mm |
| Rear Fan Support | 1 x 120mm / 1 x 140mm |
| PSU Shroud Fan Support | 2 x 120mm |
| Tautoko Radiator o mua | Tae atu ki te 360mm |
| Tautoko Radiator Runga | Tae atu ki te 280mm |
| Tautoko Radiator Whakamuri | Tae atu ki te 140mm |
| Max CPU Cooler Teitei | 170mm |
| Max GPU Roa | 340mm |
| Max PSU Roa | 200mm (with HDD) / 365mm (without HDD) |
| Peia Bays | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| Paepae I/O | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
Whakaahua 11: Whakamuri view of the Antec NX700, showing expansion slots and fan mount.
7. Pūtāhui me te Tautoko
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
Antec Official Webpae: www.antec.com
