1. Kupu Whakataki
This manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of the LAUNCH XXNUMX PRO XNUMX Scan Tool. The LAUNCH XXNUMX PRO XNUMX is an advanced diagnostic scanner designed for professional automotive technicians and repair shops, offering extensive vehicle coverage and a wide range of diagnostic and service functions.
It is an upgraded version of the XXNUMX V+ and PROXNUMX, featuring JXNUMX ECU Programming, ECU Online Coding, Topology Mapping, bi-directional control, and over XNUMX reset functions. This tool is equipped with a SmartLink C VCI for enhanced communication capabilities, including CANFD and DOIP protocols.
2. Hua Neke Atuview me nga waahanga matua
The LAUNCH XXNUMX PRO XNUMX Scan Tool is engineered to provide OE-level diagnostic capabilities. Its robust feature set includes:
- JXNUMX ECU Programming: Enables advanced OEM JXNUMX reprogramming for various vehicle brands, facilitating data transfer and module updates.
- ECU Online Coding: Allows direct connection to OEM servers for coding functions, enhancing vehicle performance and customizing settings.
- Topology Mapping: Provides a visual representation of the vehicle's data bus configurations, improving diagnostic efficiency.
- Bi-directional Control (Active Test): Permits sending commands to vehicle systems and components to test their functionality, aiding in rapid troubleshooting.
- XNUMX+ Reset Functions: Comprehensive suite of maintenance and service functions including Oil Reset, EPB Reset, TPMS Reset, BMS, Injector Coding, ABS Bleeding, SAS Reset, Throttle Matching, and more.
- All System Diagnostics: Full-function diagnostics for all on-board systems, including Engine, Transmission, ABS, Airbags, TPMS, BCM, and more. Supports reading/clearing codes, viewing live data, and VIN information.
- SmartLink C VCI: A wireless Vehicle Communication Interface supporting ISOXNUMX, JXNUMX, SAE JXNUMX, CANFD, and DOIP protocols for faster data transmission and remote diagnostics.
- Advanced Functions: Includes VAG Guided functions, personalization options, ADAS calibration support, and AutoAuth for FCA vehicles.
- Wide Vehicle Coverage: Supports XNUMX% of vehicles manufactured from XNUMX-XNUMX, covering American, Asian, and European models without IP limitations.
Figure XNUMX: LAUNCH XXNUMX PRO XNUMX Scan Tool and its comprehensive accessory kit.
Whakaatu 2.2: Neke Atuview of the LAUNCH XXNUMX PRO XNUMX's primary advanced capabilities.
XNUMX. Components and Package Contents
The LAUNCH XXNUMX PRO XNUMX package includes the following main components:
- LAUNCH X-XNUMX PROXNUMX Main Unit (Diagnostic Tablet)
- SmartLink C VCI Module
- Diagnostic Cables and Connectors (various vehicle-specific adapters)
- Pūurutau Hiko
- Tauira USB
- Pukapuka Kaiwhakamahi (tenei tuhinga)
- Puhi Rokiroki
The main unit is powered by a Lithium Ion battery (included).
4. Aratohu Tatūnga
XNUMX Initial Power-Up and Configuration
- Utuhia te Pūrere: Before first use, connect the LAUNCH XXNUMX PRO XNUMX main unit to the power adapter and charge it fully. The device uses a Lithium Ion battery.
- Whakahiko: Press and hold the power button on the main unit to turn it on.
- Tatūnga Tuatahi: Follow the on-screen prompts to select your language, time zone, and connect to a Wi-Fi network. A stable internet connection is crucial for software updates and online functions.
- Whakahōu Pūmanawa: Navigate to the "Software Update" section within the diagnostic application. It is highly recommended to update all available software packages to the latest version to ensure optimal performance and vehicle compatibility, including the Topology Mapping function (requires V XNUMX or higher).
XNUMX Connecting the SmartLink C VCI Module
The SmartLink C VCI module acts as the communication bridge between the diagnostic tablet and the vehicle's OBD-II port.
Figure XNUMX: SmartLink C VCI Module with port descriptions.
- Connect VCI to Vehicle: Locate the vehicle's OBD-II diagnostic port (usually under the dashboard) and securely plug in the SmartLink C VCI module.
- Pair VCI with Tablet: The SmartLink C VCI connects wirelessly (Bluetooth/Wi-Fi) to the XXNUMX PRO XNUMX tablet. Ensure Bluetooth is enabled on the tablet. The VCI should automatically pair or be discoverable within the diagnostic application.
- Power Status: Verify the indicator lights on the SmartLink C VCI module to confirm it is powered on and communicating with the tablet.
5. Nga Tohutohu Whakahaere
XNUMX Full System Diagnostics
The XXNUMX PRO XNUMX can perform comprehensive diagnostics on all available vehicle systems.
Figure XNUMX: Full System Diagnostics capability covering all on-board systems.
- Vehicle Connection: Ensure the SmartLink C VCI is properly connected to the vehicle's OBD-II port and paired with the tablet.
- Select Diagnostic Mode: From the main menu, select "Intelligent Diagnose" or "Local Diagnose" depending on your preference. Intelligent Diagnose can automatically identify the VIN.
- Matawai Pūnaha: The tool will scan all accessible electronic control units (ECUs) in the vehicle.
- Review Data:
- Panui Waehere: Retrieve Diagnostic Trouble Codes (DTCs) from all systems.
- Mukua nga Waehere: Clear DTCs after repairs are completed.
- View Live Data: Monitor real-time sensor data and parameters.
- VIN Information: Access vehicle identification number details.
XNUMX JXNUMX ECU Programming
The JXNUMX programming function allows for advanced module reprogramming, typically required for replacing ECUs, updating software versions, or repairing data loss issues.
Figure XNUMX: JXNUMX ECU Programming and Coding capabilities.
This function requires the SmartLink C VCI and may necessitate access to OEM software subscriptions for specific vehicle brands (e.g., BMW, Mercedes-Benz, Ford, Jaguar, Land Rover, Volvo). Refer to the specific vehicle manufacturer's JXNUMX pass-thru programming instructions for detailed steps.
XNUMX ECU Online Coding
Online coding allows for advanced vehicle customization and module matching by connecting directly to OEM servers.
Figure XNUMX: ECU Online Coding and Bi-directional Control in action.
- Match component control modules.
- Flash hidden features.
- Customize OE-settings.
- Disable or unlock specific functions.
This feature is particularly useful for brands like BMW, VW, Porsche, and Mercedes-Benz.
XNUMX Topology Mapping
Topology Mapping provides an intuitive graphical display of the vehicle's communication network, showing the status and relationships of all ECUs.
Figure XNUMX: Topology Mapping interface for intuitive problem presentation.
To access this feature, ensure your XXNUMX PRO XNUMX software is updated to V XNUMX or higher. This function allows for quick identification of problematic modules and streamlines the diagnostic process.
XNUMX Bi-directional Control (Active Test)
Bi-directional control allows the technician to send commands from the scan tool to the vehicle's ECUs to activate specific components or perform system tests.
Whakaahua 5.5: Examples of bi-directional control functions.
Examples include: Injector Buzz Test, Switch Cylinder Correction On/Off, Solenoid Valve activation, Tank Ventilation, Fuel Pump & Valve Tests, A/C Compressor Activation, turning windows on/off, EGR test, turning wipers on/off, and turning the radiator fan on/off.
XNUMX XNUMX+ Reset Functions
The XXNUMX PRO XNUMX offers a comprehensive suite of service and maintenance functions.
Figure XNUMX: A selection of the XNUMX+ available reset functions.
Ko ngā mahi noa ko:
- Tautuhi Hinu
- EPB Reset (Electronic Parking Brake)
- TPMS Reset (Tire Pressure Monitoring System)
- BMS Reset (Battery Management System)
- Waehere Injector
- SAS Reset (Steering Angle Sensor)
- Throttle Matching
- ABS Whakaheke toto
- Suspension Calibration
- Tihiamp Whakatikatika
- WIN DR ROOF (Window/Door/Roof Initialization)
- TEC Learning (Transmission Electronic Control)
- Airbag Reset
- ODO Reset (Odometer)
- A/F Setting (Air/Fuel Ratio)
- Misfire Check
Access these functions via the "Service Function" menu on the main screen.
XNUMX Advanced Functions
Beyond core diagnostics, the XXNUMX PRO XNUMX offers several advanced features to boost repair efficiency:
Whakaatu 5.7: Neke Atuview of advanced functions.
- Online Functions: Obtain data directly from OEM servers for various diagnostic and programming tasks.
- Whakawhaiaro: Customize vehicle settings, such as enabling or disabling certain features (e.g., auto start/stop, daytime running lights).
- Guided Functions: Provides step-by-step instructions for complex procedures, particularly useful for VAG group vehicles (VW, Audi, Skoda, Seat).
- AutoAuth for FCA Vehicles: Allows access to protected FCA (Fiat Chrysler Automobiles) vehicle functions.
- Component Matching: Facilitates the matching and adaptation of new or replaced vehicle components.
- ADAS Module Supported: Supports calibration of Advanced Driver-Assistance Systems (ADAS). Note: This may require additional hardware and software.
Figure XNUMX: HD Protocol and ADAS Calibration capabilities.
For heavy-duty trucks, an extra purchase of HD software subscription and non-XNUMXpin HD adapters may be required.
6. Tiaki
Proper maintenance ensures the longevity and optimal performance of your LAUNCH XXNUMX PRO XNUMX Scan Tool.
- Whakahōu Pūmanawa: Regularly check for and install software updates. LAUNCH offers XNUMX years of free updates for this model. Updates often include new vehicle models, bug fixes, and enhanced functionalities.
- Te horoi: Use a soft, dry cloth to clean the tablet screen and body. Avoid abrasive cleaners or solvents.
- Rokiroki: Store the device and its accessories in the provided protective case when not in use. Keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- Tiaki Pūhiko: To prolong battery life, avoid fully discharging the battery frequently. If storing for extended periods, ensure the battery is charged to about XNUMX-XNUMX%.
- Tirohanga taura: Periodically inspect all diagnostic cables and connectors for signs of wear, damage, or corrosion. Replace damaged cables immediately.
7. Te Raru
This section addresses common issues you might encounter with the LAUNCH XXNUMX PRO XNUMX Scan Tool.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore te taputapu i te hiko. | Low battery; Power button not held long enough; Hardware malfunction. | Charge the device fully. Press and hold the power button for XNUMX-XNUMX seconds. If issue persists, contact technical support. |
| Unable to connect to vehicle. | VCI not properly connected; VCI not paired with tablet; Vehicle ignition off; Damaged OBD-II cable/VCI. | Ensure VCI is securely plugged into OBD-II port. Verify VCI is paired via Bluetooth/Wi-Fi. Turn vehicle ignition to ON position. Check cables for damage. |
| Diagnostic app crashes or freezes. | Outdated software; Insufficient memory; Software conflict. | Update all software to the latest version. Close other running applications. Restart the device. If persistent, perform a factory reset (backup data first) or contact support. |
| Certain functions not available for a specific vehicle. | Vehicle not supported for that function; Software not updated; Specific module not present in vehicle. | Verify vehicle compatibility for the specific function. Ensure software is up-to-date. Some advanced functions require specific vehicle configurations. |
| JXNUMX programming issues. | Incorrect OEM software setup; Unstable power supply during programming; Network issues. | Ensure correct OEM software and drivers are installed. Maintain stable vehicle battery voltage (use a battery maintainer). Ensure stable internet connection. Follow OEM programming procedures precisely. |
For issues not covered here, please refer to the official LAUNCH support resources or contact their customer service.
8. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tauira | LAUNCH X-XNUMX PROXNUMX |
| Pūnaha Mahi | Android 10.0 |
| Tukatuka | XNUMXGHz XNUMX-core Processor |
| Whakaatu | XNUMX" (XNUMXxXNUMX resolution) |
| Maharahara | XNUMXGB RAM / XNUMXGB Internal Storage |
| Kāmera | XNUMXMP Rear Camera |
| Hononga | Dual-WiFi (XNUMXGHz/XNUMXGHz), Bluetooth |
| Pūhiko | XNUMXmAh Lithium Ion (included) |
| Taumaha Tūemi | 21.4 pauna |
| Hunga Hua | 23.62 x 6.3 x 15.75 inihi |
| Momo Whakanoho Motika | Universal Fit |
| Tau Waahanga Kaihanga | XXNUMX PROXNUMX |
| UPC | 850052860332 |
Figure XNUMX: Key hardware specifications of the LAUNCH XXNUMX PRO XNUMX.
9. Pūtāhui me te Tautoko
The LAUNCH XXNUMX PRO XNUMX Scan Tool typically comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official LAUNCH webpae mo nga tikanga me nga tikanga whakamana.
- Free Updates: This product includes XNUMX years of free software updates from the date of activation.
- Tautoko Hangarau: For technical assistance, troubleshooting, or inquiries regarding product functionality, please contact LAUNCH customer support. Contact information can usually be found on the official LAUNCH website or within the device's "Info Center" application.
- Rauemi ipurangi: Utilize online forums, FAQs, and video tutorials provided by LAUNCH for additional support and operational guidance.
