Keter Detroit XL Low Storage Cabinet

1. Kupu Whakataki

Thank you for choosing the Keter Detroit XL Low Storage Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new storage unit. Please read these instructions carefully before beginning assembly and retain them for future reference.

The Keter Detroit XL Low Storage Unit is designed to provide a robust and organized storage solution for your home, garage, or shed. Its durable polypropylene construction ensures longevity, and the lockable doors offer enhanced security for your belongings.

2. Nga korero haumaru

• Panuitia nga Tohutohu Katoa: I mua i te huihuinga me te whakamahinga, me pānui marie, ā, me mārama hoki ki ngā tohutohu katoa.
• Huihuinga: Assembly should be performed by at least two adults. Ensure all parts are present and undamaged before starting.
• Pūmautanga: For optimal firmness and to prevent the cabinet from tipping over, it is strongly recommended to fix the cabinet to a wall using appropriate fasteners (not included).
• Raukaha Taumaha: Each adjustable shelf has a maximum load capacity of 25 kg (55 lbs). Do not exceed this weight limit per shelf. Distribute weight evenly.
• Turanga: Place the cabinet on a flat, level, and stable surface. Avoid placing it in direct, prolonged sunlight as this may affect the material over time.
• Tikanga Maukati: The cabinet is designed to be lockable (lock not included). Use a suitable padlock for added security.
• Nga tamariki me nga kararehe: Keep children and pets away from the assembly area. Do not allow children to climb on or play inside the cabinet.
• Whakahau: Ensure adequate ventilation if storing items that may emit fumes.

3. Ihirangi mokete

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Keter customer service for assistance.

• Cabinet Panels (sides, top, bottom, back)
• Ngā Kūaha Kāpata (2)
• Ngā Whata Whakarite (2)
• Kakau (2)
• Assembly Hardware (screws, pins, connectors, etc.)
• Pukapuka Tohutohu Huihuinga

4. Tatūnga me te Runanga

Assembly of the Keter Detroit XL Low Storage Cabinet requires basic tools and approximately 30-60 minutes. Follow the steps outlined in the included assembly instructions carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratching.

Ka mutu te Runangaview:

1. Whakapaia te Rohe: Clear a spacious, level area for assembly. Unpack all components and verify against the parts list.
2. Assemble Base and Sides: Connect the bottom panel to the side panels according to the diagrams in the separate assembly instructions.
3. Tāutahia ngā Paewhiri Whakamuri: Secure the polypropylene back panels into the grooves of the side and bottom panels.
4. Āpiti Paepae Runga: Whakaorangia te papa o runga ki te hanganga kua whakaemihia.
5. Tāuta Whata: Insert the adjustable shelves at your desired height. The shelves can be repositioned later as needed.
6. Attach Doors and Handles: Mount the cabinet doors to the main frame using the provided hinges. Attach the handles to the doors.
7. Whakamaua ki te Pakitara (E taunakitia ana): For maximum stability and safety, especially if storing heavy items or in areas with children, secure the cabinet to a wall using appropriate wall anchors and screws (not supplied). Locate wall studs if possible.

Whakaahua 4.1: Mua view of the assembled Keter Detroit XL Low Storage Cabinet.

Whakaahua 4.2: Roto view of the cabinet with doors open, highlighting the two adjustable shelves.

Figure 4.3: Ahu ki rungaview of the Keter Detroit XL Low Storage Cabinet (Height: 93cm, Depth: 54cm, Width: 89cm).

5. Mahi me te Whakamahinga

• Te uta i te Kāpata: Place heavier items on the bottom shelf to improve stability. Distribute weight evenly across shelves. Do not exceed the 25 kg (55 lbs) weight limit per shelf.
• Whakaritea Papa: The shelves are height adjustable. To reposition a shelf, carefully remove all items, lift the shelf, and reinsert it into the desired slots on the side panels.
• Tikanga Maukati: The cabinet features a provision for a padlock (not included) to secure the doors. Align the holes on the doors and insert a padlock for security.
• Mahi kuaha: Ensure doors open and close smoothly. Do not force them if they stick; check for obstructions or alignment issues.

6. Tiaki

• Te horoi: Clean the cabinet regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the polypropylene material.
• Tirotiro: Periodically inspect the cabinet for any signs of wear, damage, or loose connections. Ensure the wall mounting (if used) remains secure.
• Nga Tikanga Taiao: While durable, extreme temperatures or prolonged exposure to direct sunlight may affect the material over time. Store in a shaded or protected area if possible.

7. Te Raru

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Keter products are manufactured to high quality standards. For information regarding warranty coverage, product support, or to order replacement parts, please refer to the contact information provided with your purchase documentation or visit the official Keter webpae.

Tena koa to tau tauira (249803) and date of purchase ready when contacting support.