Pukapuka Kaiwhakamahi mō te Pana Wā Mamati TM617

1. Kupu Whakataki

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Whakaahua 1: Mua view of the TM617 Digital Time Switch.

2. Nga korero haumaru

• Ensure the power supply is disconnected before installation or maintenance to prevent electric shock.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Kaua e whakaatuhia te taputapu ki te makuku, ki ngā pāmahana tino kino, ki ngā taiao waikura rānei.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Manatokohia te voltage rating of the device (110V/220V) matches your power supply before connection.

3. Nga Hua o te Hua

• Large LCD display for clear and easy reading.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Manual override function.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Ihirangi mokete

Tena koa tirohia nga ihirangi mokihi i te whakatuwheratanga:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Manual Kaiwhakamahi (tenei tuhinga)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Tatūnga me te Tāuta

5.1 Whakapiki

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Wiring Hoahoa

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Mana Whakauru: Connect the 110V/220V AC power supply to the designated input terminals.
• Utaina Putanga: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Nga Tohutohu Whakahaere

6.1 Nga Mahi Patene

• P (Pataka): Enters or exits programming mode.
• D+ (Day): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Hour): Adjusts hour in setting mode; selects hour in program mode.
• M+ (Minute): Adjusts minute in setting mode; selects minute in program mode.
• C/R (Cancel/Recall): Resets current setting; recalls programs.
• Clock Icon (Set Time): Press to enter time setting mode.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Te Whakatakoto i te Wā me te Rā o Nāianei

1. Patohia me te pupuri i te Karaka Ata pātene.
2. I te wa e mau ana te Karaka Ata, perehi D+ to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
3. I te wa e mau ana te Karaka Ata, perehi H+ ki te whakarite i te haora o naianei.
4. I te wa e mau ana te Karaka Ata, perehi M+ ki te tautuhi i te meneti o naianei.
5. Tukua te Karaka Ata paatene hei whakaora i nga waahi.

6.3 Te Hōtaka i ngā Huringa Whakakā/Whakaweto

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Pehia te P kotahi te paatene. Ka whakaatu te whakaaturanga "1 ON".
2. Perehi D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Perehi H+ to set the hour for the first ON program.
4. Perehi M+ to set the minute for the first ON program.
5. Pehia te P button again. The display will show "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF program.
7. Me pehi tonu P to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
8. I muri i te tautuhi i nga papatono e hiahiatia ana, pehia te Karaka Ata te paatene ki te puta i te aratau hotaka ka hoki ki te whakaaturanga o naianei.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Whakakore a-ringa

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Pehia te Whakakore a-ringa pātene ki te huri i roto i ngā aratau:
• ON: Output is continuously ON, ignoring programs.
• MOTO: Output follows programmed ON/OFF cycles.
• WATE: Output is continuously OFF, ignoring programs.
• Tīpakohia AUTO for normal operation based on your programmed schedule.

7. Tiaki

• Horoia te taputapu ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga kai horoi me nga whakarewa.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Te Raru

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER webpae, tirohia ranei ki te kohinga hua.