He pukapuka tohutohu mō te whakamahana pakitara tino marino a Stelpro (ASHC2002W)

1. Kupu Whakataki me Nekeview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Nga korero haumaru

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Pānuihia nga tohutohu katoa i mua i te whakauru, te whakamahi ranei i tenei whakamahana.
• Ensure the power supply is disconnected at the main circuit breaker before installation or maintenance.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• I hangaia tenei whakamahana mo te whakamahi o roto anake.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Ihirangi mokete

Manatokohia kei te noho nga waahanga katoa me te kore e pakaru i te whakatuwheratanga o te kete:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Pūmārō Tāuta (nga tīwiri, punga)
• Pukapuka Tohutohu

4. Whakatakotoranga

Atahanga 4.1: Ahu Hua

5. Tāutanga

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 Te Whakanui i te Whakawera

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. Whakamaua te taiapa whakapuru ki te pakitara ma te whakamahi i nga wiri kua whakaratohia.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 Waea Hiko

1. Me mohio kua MATE te hiko i te wehenga ara iahiko matua.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Whakauhia ngā hononga katoa, kia kore ai he waea tahanga e kitea.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. Whakahokia te hiko i te kaaiti iahiko matua.

6. Nga Tohutohu Whakahaere

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 Te Whakatakoto i te Mahana

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• Ka pupuri aunoa te whakamahana i te pāmahana kua whakaritea.

6.2 Aratau Mahi

• Aratau Aunoa: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• Aratau Haumarutanga: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Tiaki

Ko te tiaki i nga wa katoa ka tino pai te mahi me te roa o to whakamahana.

• Te horoi: Ensure the heater is turned off and cool before cleaning. Use a soft, damp kakahu hei muru i te taha o waho. Kaua e whakamahi i ngā kaihoroi whakakoi, i ngā whakarewa rānei.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• Tirohanga Tau: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Te Raru

If your heater is not operating correctly, consult the following common issues before contacting support:

• Kare te whakamahana e ka ana: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• He wera iti: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• Haruru rerekee: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Ngā Take Whakaaturanga Werohanga: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Pūtāhui me te Tautoko

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• 5-Tau Rarangi Rarangi on the overall unit.
• Pūtāhui Ora i runga i te huānga whakawera.
• 3-Tau Pūtāhui on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webpae.