Pukapuka Kaiwhakamahi mō te Tēpu Kawhe Hoahoa X-Frame a ClosetMaid 3930

1. Kupu Whakataki

This manual provides instructions for the assembly, use, and maintenance of your ClosetMaid 3930 X-Frame Design Coffee Table with Shelf. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image 1.1: The ClosetMaid 3930 X-Frame Design Coffee Table in White Wood, featuring a top surface and a lower shelf.

2. Nga korero haumaru

WHAKATŪPATO: Potential safety warnings include pinch point risks, weight limits, and cautions for assembly. Always follow these guidelines to ensure safe use:

• Tiakina nga waahanga iti mai i nga tamariki i te wa e huihui ana.
• Do not exceed the recommended weight capacity for the top surface or the lower shelf.
• Me whakarite kia mau te here i mua i te whakamahi. Tirohia ia ia me te whakatiki ano ina tika.
• Avoid placing hot items directly on the laminated surface without protection.
• Ko tenei hua he mea tika mo roto, mo nga kaainga noho anake.

3. Ihirangi mokete

Tena koa tirohia kei te noho nga waahanga katoa i mua i te tiimata o te huihuinga:

• (1) Paewhiri Runga
• (1) Paewhiri Raro
• (2) Top Cleats
• (2) Side Panels (with X-frame design)
• (1) Bottom Cleat
• Nga Taonga Huihuinga (ngiukiri, toka, aha atu)

4. Tatūnga me te Runanga

Assembly is recommended for one person. A screwdriver is required for assembly.

4.1. Utauta e hiahiatia ana

• Karekau (kaore i uru)

4.2. Nga Mahi Huihuinga

1. Wetekina ngā wāhanga katoa ka whakatakotoria ki runga i tētahi mata ma, ngohengohe hoki kia kore ai e rakuraku.
2. Attach the Top Cleats to the underside of the Top Panel using the provided hardware. Ensure they are aligned correctly.
3. Attach the Bottom Cleat to the underside of the Bottom Panel.
4. Connect the Side Panels (with pre-assembled X-design gables) to the Top Panel and Bottom Panel. The X-design gables provide structural support.
5. Secure all connections with the remaining assembly hardware. Ensure all screws are tightened firmly but do not overtighten to avoid damaging the laminated wood.
6. Carefully stand the assembled coffee table upright.

Image 4.1: Dimensional diagram of the coffee table, showing its height, width, and depth.

Image 4.2: Detail of the pre-assembled X-frame design on the side panel, highlighting its construction.

5. Nga Tohutohu Whakahaere

The ClosetMaid 3930 Coffee Table is designed for versatile use in your living space. It features a top surface and a lower shelf for storage and display.

• Mata Runga: Use for placing beverages, remote controls, books, or decorative items.
• Papa o raro: Ideal for storing magazines, larger books, or other items you wish to keep organized and accessible.

6. Tiaki me te Tiaki

To maintain the appearance and longevity of your coffee table:

• Horoia kia ma ki te ngohengohe, damp kakahu. A ape i nga kai horoi abrasive.
• Do not use harsh chemicals or solvents, as they may damage the laminated finish.
• The table is e kore e paopao. Promptly clean any spills to prevent staining.
• Keep the table away from direct sunlight and excessive moisture to prevent warping or discoloration.
• Periodically check all hardware and tighten if necessary to ensure stability.

7. Te Raru

If you encounter issues with your coffee table, refer to the following common solutions:

• He wiri te tepu: Ensure all screws and fasteners are fully tightened. If the issue persists, disassemble and reassemble, paying close attention to the alignment of each component.
• Difficulty aligning parts during assembly: Double-check that you are using the correct hardware for each step and that components are oriented as shown in the instructions. Sometimes, loosening adjacent screws slightly can help with alignment before re-tightening everything.
• Scratches or damage during assembly: Always assemble on a soft, protected surface. Minor scratches on laminated surfaces can sometimes be touched up with furniture repair markers matching the white finish.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

9.1. Pūtāhui Kaihanga

The manufacturer will replace any missing or damaged part due to manufacturer defect for 30 days after purchase. Please retain proof of purchase for warranty claims. Combining ClosetMaid branded products with third-party components or products will void the ClosetMaid manufacturer’s warranty.

9.2. Tautoko Hua

For additional support, missing parts, or inquiries, please visit the official ClosetMaid store or contact customer service.

Tirohia te ClosetMaid Store.