Cooler Master XG650 Plus Platinum ARGB 650W Power Supply Unit User Manual

1. Kupu Whakataki me Nekeview

The Cooler Master XG650 Plus Platinum ARGB is a fully modular 650W power supply unit designed for high-performance computing systems. It features an 80 PLUS Platinum certification for high efficiency, a 135mm silent fan, and a built-in digital display panel for real-time monitoring of performance data. This unit incorporates 100% Japanese capacitors for enhanced reliability and meets Intel ATX 12V version 2.53 guidelines.

Āhuatanga matua:

• In-House Platform Design: Engineered for high-end performance with reduced temperature requirements.
• ARGB Fans with Digital Side Panel: Monitor real-time performance data including fan speed, temperature, power load, and customize ARGB lighting.
• Tiwhikete Platinum 80 PLUS: Guarantees a minimum typical efficiency of 92% under normal operating conditions.
• Pā Hau 135mm Mārie: Fluid dynamic fan bearing for low RPM operations and quiet cooling performance.
• Smart Thermal Control Mode: Fan remains inactive until the unit reaches 50% load, ensuring silent operation during normal use.
• Ngā Pūngao Hapanihi 100%: Used in both the platform and cables for increased efficiency and reduced ripple noise.
• Waea Pūrua Katoa: Reduces cable clutter, improves airflow, and enhances overall efficiency and thermal performance.

Figure 1.1: The Cooler Master XG650 Plus Platinum ARGB 650W Power Supply Unit.

2. Tatūnga me te Tāuta

2.1 Whakatupato Haumaru

• Always disconnect the power cord from the wall outlet before installing or removing the power supply.
• Me whakarite te turanga tika kia kore ai e ru te hiko.
• Do not open the power supply unit casing. Te teitei voltagkei roto kei roto.
• Tāutahia te pūhiko ki tētahi wāhi e pai ana te hau.

2.2 Ihirangi mokete

Manatokona kei te noho nga waahanga katoa:

• Cooler Master XG650 Plus Platinum ARGB PSU
• Modular Cable Set (ATX 24-pin, EPS 4+4 pin, EPS 8 pin, PCIe 6+2 pin, SATA, Peripheral 4 pin)
• Waea hiko AC
• Whakaeke Tiu
• Pukapuka Kaiwhakamahi (tenei tuhinga)

2.3 Tāutanga Tinana

1. Whakaeke PSU: Secure the power supply into the designated PSU bay in your computer case using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or upwards depending on case design).
2. Hononga Taura Whakatauira: Identify the necessary cables for your motherboard, CPU, graphics card(s), and storage devices. Connect these cables to the corresponding ports on the PSU.

Figure 2.1: Modular cable connection ports on the PSU.

3. Motherboard Connections: Connect the 24-pin ATX power cable to your motherboard. Connect the 4+4 pin or 8-pin EPS cable(s) to the CPU power connector(s) on your motherboard.
4. Graphics Card Connections: Connect the appropriate PCIe 6+2 pin cables to your graphics card(s).
5. Rokiroki me nga Pikitia: Connect SATA power cables to your SSDs/HDDs and other SATA-powered devices. Use Peripheral 4-pin cables for other compatible devices.
6. USB Protocol Cable: Connect the included USB protocol cable from the PSU to an available USB 2.0 header on your motherboard. This enables software control and display panel functionality.
7. Mana AC: Kia oti nga hononga o roto katoa, honoa te taura hiko AC ki te PSU katahi ka ki te putanga pakitara.

Whakaatu 2.2: Neke Atuview of included modular cables and their lengths.

3. Nga Tohutohu Whakahaere

3.1 Te Whakakaha

After completing the installation, ensure the power switch on the back of the PSU is in the 'ON' position. Power on your computer system as usual.

3.2 Paewhiri Whakaaturanga Mamati

The XG650 Plus Platinum features a built-in digital display panel that provides real-time information about the PSU's operation. This display can show:

• Tere Kiri (RPM)
• Paemahana (°C)
• Power Load (W)
• Customized ARGB Lighting effects

Figure 3.1: The ARGB digital display panel on the PSU.

3.3 MasterPlus+ Software Control

For advanced monitoring and customization of the ARGB lighting and fan behavior, install the Cooler Master MasterPlus+ software. This software allows you to:

• Monitor PSU performance data in detail.
• Adjust ARGB lighting effects and colors.
• Configure fan curves or activate Smart Thermal Control Mode.

Download the latest MasterPlus+ software from the official Cooler Master webpae: www.coolermaster.com/downloads/

Figure 3.2: MasterPlus+ software interface for monitoring and control.

3.4 Smart Thermal Control Mode

The PSU features a Smart Thermal Control Mode where the 135mm fan will remain inactive (0 RPM) until the power load reaches 50%. This ensures silent operation during low to moderate system usage. Once the load exceeds 50%, the fan will automatically activate and adjust its speed to maintain optimal temperatures.

Figure 3.3: The quiet 135mm fan with ARGB lighting.

4. Tiaki

Proper maintenance ensures the longevity and optimal performance of your power supply unit.

• Puritia kia ma: Periodically clean the exterior of the PSU and the fan grille to prevent dust buildup. Use compressed air to gently remove dust from the fan blades and internal components (do not open the casing).
• Whakaritea te Rererangi: Make sure there is adequate airflow around the PSU. Avoid blocking the intake or exhaust vents.
• Whakaha Uepu: Good cable management not only improves aesthetics but also enhances airflow within your PC case, contributing to better cooling for all components, including the PSU.

5. Te Raru

If you encounter issues with your Cooler Master XG650 Plus Platinum ARGB PSU, refer to the following troubleshooting steps:

5.1 Karekau he Mana

• Tirohia nga Hononga Hiko: Ensure the AC power cord is securely plugged into both the PSU and the wall outlet. Verify the power switch on the PSU is in the 'ON' position.
• Ngā Hononga ā-Roto: Double-check all modular cables are firmly connected to both the PSU and your components (motherboard, CPU, GPU).
• Putanga Taiepa: Test the wall outlet with another device to ensure it is supplying power.
• Motherboard Power Button: Ensure your case's power button is correctly connected to the motherboard.

5.2 Kāore te Pā e Hurihuri

• Smart Thermal Control: Remember that the fan operates in Smart Thermal Control Mode and will not spin until the PSU load reaches 50%. This is normal behavior for silent operation.
• Tautuhinga Pūmanawa: If the fan is not spinning under load, check the fan settings in the MasterPlus+ software.
• Ārai: Ensure there are no physical obstructions preventing the fan from spinning.

5.3 Digital Display Panel Not Working / ARGB Issues

• Hononga USB: Verify that the USB protocol cable is correctly connected from the PSU to a USB 2.0 header on your motherboard.
• Pūmanawa MasterPlus+: Ensure the MasterPlus+ software is installed and running. Check for any error messages or update the software to the latest version.
• Nga take taraiwa: Reinstall the MasterPlus+ software and any associated drivers.

6. Whakatakotoranga

Figure 6.1: Power supply rating label.

7. Pūtāhui me te Tautoko

7.1 Nga Korero Whakaputanga

The Cooler Master XG650 Plus Platinum ARGB PSU comes with a standard limited manufacturing warranty:

• Core Operating Products: 10-tau whakamana mai i te ra o te hokonga.
• ARGB LED: 3-tau whakamana mai i te ra o te hokonga.

Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accidents, misuse, abuse, natural disasters, or unauthorized modifications.

7.2 Tautoko Hangarau

For technical assistance, product inquiries, or warranty claims, please visit the official Cooler Master support webpae, whakapā atu ranei ki ta raatau ratonga kaihoko:

• Tautoko Matua Matao Webpae: www.coolermaster.com/support/
• Refer to the Cooler Master webpae mo nga korero whakapā a rohe.