Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

1. Kupu Whakataki

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. Nga korero haumaru

• WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te whakakorikori, i te ara iahiko ranei i mua i te whakaurunga, i te ratonga ranei.
• Me mahi te tāutanga e te tohunga hiko whai tohu, kia rite ki ngā ture hiko ā-motu me ā-rohe.
• Kaua e whakarerekētia, e whakapōrearea rānei te taputapu.
• Me whakarite te tuku voltaghe hototahi ki nga whakaritenga o te taputapu (120 Volts).
• Do not handle live wires with bare hands.
• Ko tenei hua Damp Whakatauria, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. He aha kei roto i te Pouaka

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

• LED Disc Light Fixture (12 units per pack)
• TP24 Hono
• E26 Whāurutau
• Spring Clips (pre-attached or included for installation)
• Nati Nati
• Whakaeke Tiu
• Pukapuka Tohutohu

4. Tohutohu Tāuta

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. Utauta e hiahiatia ana

• Kaihurihuri
• Wire Strippers (if connecting to junction box)
• Mohiti Haumaru

4.2. Recessed Can Installation (5-inch or 6-inch)

1. Whakawetohia te hiko: Ensure power to the fixture is OFF at the circuit breaker.
2. Remove existing trim: Carefully remove the existing bulb and trim from the recessed can.
3. Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
4. Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
5. Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
6. Insert fixture: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.

4.3. Junction Box Installation

1. Whakawetohia te hiko: Ensure power to the junction box is OFF at the circuit breaker.
2. Whakaritea ngā waea: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
3. Honoa waea: Use the provided wire nuts to connect the corresponding wires:
   • Black fixture wire to Black junction box wire.
   • White fixture wire to White junction box wire.
   • Green/Yellow fixture wire to Green/Bare Copper junction box wire.
4. Secure fixture: Use the provided mounting screws to attach the disc light's base directly to the junction box.
5. Attach diffuser: Twist the diffuser onto the fixture base until securely fastened.

5. Nga Tohutohu Whakahaere

5.1. Te Hiko / Whakaweto

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Selectable Color Temperature (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

5.3. Taumahinga Ngahuru

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

Nga Rima Hototahi:

6. Tiaki

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

• Te horoi: Me mohio kua weto te hiko i mua i te horoi. Horoia te taputapu ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
• Whakakapi Purama: This fixture uses integrated LEDs and does not require bulb replacement.

7. Te Raru

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Sunco Lighting offers a 7-Tau Tiaki warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the Toa Rama Sunco mo etahi atu korero.