Aerocool DELTABKV1 ATX PC Case User Manual

Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aerocool DELTABKV1 ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe use of the product.

Whakaahua: Koki view of the Aerocool DELTABKV1 PC case, highlighting its RGB front panel design and the transparent tempered glass side panel.

1. Tatūnga me te Tāuta

Follow these steps for installing components into your Aerocool DELTABKV1 PC case.

1.1 Te Whakarite i te Take

1. Carefully unpack the PC case and remove all packaging materials.
2. Whakatakotoria te pouaka ki runga i tētahi mata pūmau, papatahi.
3. Remove the tempered glass side panel by unscrewing the thumb screws located at the rear of the panel. Gently slide the panel off and set it aside on a soft, non-abrasive surface to prevent scratches.
4. Remove the right-side metal panel by unscrewing its thumb screws to access the cable management area.

Whakaahua: Roto view of the PC case, illustrating the main compartment for motherboard and expansion cards, along with drive mounting points.

1.2 Whakaaturanga Papa Pouaka

1. Identify the correct standoff locations for your ATX, Micro-ATX, or Mini-ITX motherboard. The case may have pre-installed standoffs or marked positions.
2. Install any necessary additional standoffs.
3. Tāutahia te whakangungu I/O ki roto i te pūaha o muri o te pouaka.
4. Āta whakanohoia te papahoahoa ki runga i ngā tūāpapa, me te whakarite i ngā kōhao tīwiri.
5. Whakamaua te papahoahoa ki ngā tīwiri kua whakaratohia. Kaua e whakakī rawa.

1.3 Te Whakanoho Puku Rokiroki

E tautoko ana te pouaka i ngā HDD 2 x 3.5" me ngā SSD 2 x 2.5".

• Ngā HDD 3.5": Locate the drive cage in the lower compartment. Slide the 3.5" drives into the bays and secure them with screws.
• Ngā SSD 2.5": Mount the 2.5" drives onto the designated mounting points behind the motherboard tray or in the drive cage, securing them with screws.

Atahanga: View of the rear interior, illustrating the space for cable routing and mounting locations for 2.5-inch storage drives.

1.4 Whakaaturanga Whakaaturanga Hiko (PSU) Whakauru

1. Whakanohoia te PSU ki roto i te wāhanga motuhake kei raro i muri o te pouaka.
2. Ensure the PSU fan faces downwards (if there's a filtered vent at the bottom) or upwards, depending on your cooling preference and PSU design.
3. Secure the PSU to the case with screws from the rear.

1.5 Expansion Card (GPU) Installation

1. Tangohia ngā taupoki mokamoka PCI e tika ana mai i muri o te pouaka.
2. Whakauruhia tō kāri whakairoiro, ētahi atu kāri whakawhānui rānei ki ngā mokamoka PCIe e tika ana i runga i te papahoahoa.
3. Secure the expansion card(s) with screws. The case supports graphics cards up to 307mm in length.

Image: Rear exterior of the case, displaying the PCI expansion slots, the cutout for the power supply, and the pre-installed 12cm rear fan.

1.6 Tāutanga o te Pā me te Whakamatao

The case includes one 12cm rear fan. Additional fan configurations are supported:

• Mua: 3 x 12cm fans (optional)
• Runga: 2 x 12cm fans (optional)
• muri: 1 x 12cm fan (pre-installed)
• PSU Shroud: 2 x 12cm fans (optional)

For liquid cooling, a 12cm radiator can be installed at the rear.

1.7 Hononga Paewhiri Mua

Connect the front panel cables (USB, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Image: Top-front perspective of the case, highlighting the accessible front I/O panel which includes USB ports, audio jacks, and control buttons.

1.8 Whakahaere taura

Utilize the space behind the motherboard tray and the cable tie-down points to route and secure cables. This improves airflow and aesthetics.

1.9 Huihuinga Whakamutunga

1. Kia oti ngā wāhanga katoa te tāuta, kia tika hoki te whakahaere i ngā taura, tāpirihia anō te panera whakarewa o te taha matau.
2. Āta tāpirihia anō te taha o te karāhe whakamaroke, ka whakau ki ngā tīwiri o te koromatua.

2. Te whakahaere i nga ahuatanga o te keehi

2.1 Mana Rarama RGB

The Aerocool DELTABKV1 features an RGB front panel with integrated lighting modes. Use the dedicated LED control button on the top panel to cycle through various lighting effects and colors. Press and hold the LED button for a few seconds to turn the RGB lighting on or off.

Pikitia: Tika tonu ki mua view of the PC case, emphasizing the distinctive RGB lighting design on the front panel.

2.2 Tauranga Paewhiri Mua

The top panel provides convenient access to:

• Tauranga USB 2.0 (x2)
• HD Audio Jacks (Headphone and Microphone)
• Pātene Hiko
• Patene Tautuhi
• Pātene Mana LED

Ensure these are correctly connected to your motherboard for full functionality.

3. Tiaki

Mā te tiaki auau ka āwhina i te mahi tino pai me te roa o te ora o tō pouaka PC.

• Tātari Puehu: Periodically check and clean any removable dust filters (e.g., under the PSU, front intake). Use compressed air or a soft brush to remove accumulated dust.
• Horoi o waho: Horoia nga mata o waho ki te ngohengohe, damp cloth. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• Internal Dust: Every few months, open the case and use compressed air to gently remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

4. Te Raru

Ko tenei waahanga e aro ana ki nga take noa ka pa ki a koe.

• Kore Mana:
  • Me whakarite kei te tahuri te PSU, ā, kei te hono tika ki te putanga pakitara.
  • Manatokohia kei te hono tika te taura pātene mana mai i te pouaka ki te pane o mua o te papahoahoa.
  • Check all internal power connections (24-pin ATX, 8-pin CPU, GPU power).
• Ngā Pā Kāore e Hurihuri:
  • Confirm fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Tirohia ngā tautuhinga BIOS/UEFI mō te whakahaere i te tere o te pā.
• Rarama RGB Kaore e Mahi:
  • Ensure the RGB cable from the front panel is connected to the appropriate RGB header on your motherboard or a dedicated RGB controller.
  • Press the LED control button on the top panel to cycle through modes.
  • Check for any software control if connected to a motherboard RGB header.
• Kāore te USB/Ororongo o te Papa o Mua e Mahi Ana:
  • Verify that the USB and HD Audio cables from the case are correctly connected to the corresponding headers on your motherboard.

If issues persist, consult your motherboard manual or the component manufacturer's support resources.

5. Whakatakotoranga

6. Pūtāhui me te Tautoko

The Aerocool DELTABKV1 PC Case is covered by the manufacturer's standard warranty. For specific warranty terms, duration, and support inquiries, please refer to the official AeroCool webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to tohu hoko mo nga kereme whakamana.

Mo etahi atu awhina, tirohia te AeroCool official webpae.