Pukapuka Kaiwhakamahi mō te Pūoro Tuanui Whatunga AXIS C1210-E

1. Kupu Whakataki

This manual provides instructions for the installation, operation, and maintenance of the AXIS C1210-E Network Ceiling Speaker. The AXIS C1210-E is an all-in-one speaker system designed for versatile audio applications, including voice announcements, safety instructions, and remote warnings.

Āhuatanga matua:

• Te punaha kaikorero Katoa-i-kotahi
• Connects to standard network
• Easy installation with just one network cable (PoE)
• Scalable and easy to integrate
• Remote health testing
• Built-in microphone for 2-way audio
• Support for I/O integration
• Preconfigured Digital Signal Processor (DSP) for clear voice
• Built-in LED for visual status information
• Integrated AXIS Audio Manager Edge application

2. Tatūnga me te Tāuta

2.1 Ihirangi mokete

Manatokona kei te noho nga waahanga katoa:

• AXIS C1210-E Network Ceiling Speaker
• Installation Guide (refer to this manual)
• Mounting hardware (if included, check packaging)

2.2 Te Whakaeke i te Kai-korero

The AXIS C1210-E is designed for ceiling mounting. Ensure the chosen location provides adequate space and structural support.

Whakaahua: Rear view of the AXIS C1210-E speaker showing the mounting enclosure and connection ports. This view illustrates how the speaker integrates into a ceiling.

1. Whakapaia te whakatuwhera i te tuanui: Cut a circular opening in the ceiling according to the provided template (if applicable, refer to separate mounting template).
2. Honoa Taura Whatunga: Connect a standard Ethernet cable (Cat5e or higher) to the speaker's network port. This cable provides both data and Power over Ethernet (PoE).
3. Whakaorangia te Kaikōrero: Insert the speaker into the ceiling opening and secure it using the integrated mounting clamps. Ensure a snug fit.
4. Tāpirihia te Matapihi: Once secured, attach the front grille to the speaker.

2.3 Hononga Whatunga me te Hiko

The AXIS C1210-E connects to your standard network using a single Ethernet cable. It supports Power over Ethernet (PoE), eliminating the need for a separate power supply.

• Connect the Ethernet cable from a PoE-enabled switch or injector to the speaker's RJ45 port.
• The speaker will power on automatically once connected to a PoE source.

2.4 Whirihoranga Tuatahi

Upon first power-up, the speaker will acquire an IP address from your network's DHCP server. Use Axis IP Utility or your network management tools to discover the device and access its web atanga mō te whirihoranga taipitopito.

• Web Urunga Atanga: Tuwhera a web browser and enter the speaker's IP address.
• Takiuru: Use the default administrator credentials (refer to Axis documentation for default username/password).
• Whakauru Pūnaha: Configure integration with your Video Management Software (VMS), Voice over IP (VoIP) telephony (SIP), or other analytics platforms as required.

3. Mahi

3.1 Audio Announcements and Messaging

The AXIS C1210-E can deliver live or prerecorded voice messages for various purposes, including general information, safety instructions, and security warnings.

• Live Announcements: Utilize integrated VMS or SIP-based telephony systems to broadcast live voice messages through the speaker.
• Prerecorded Messages: Upload and schedule prerecorded audio files for playback via the AXIS Audio Manager Edge application.

3.2 Whakawhitiwhiti Ororongo-rua

The built-in microphone enables two-way audio communication, allowing for interaction with individuals near the speaker.

• Talk-Back Functionality: Initiate conversations from your control system.
• Waeaoro Waho: An external microphone input is available for situations where the speaker is installed far from the intended audience, allowing for clearer audio capture.

3.3 AXIS Audio Manager Edge

The integrated AXIS Audio Manager Edge application provides comprehensive control over your audio system.

• Whakahaere Rohe: Group speakers into zones for targeted audio delivery.
• Content Scheduling: Schedule specific audio content to play at designated times.
• Content Prioritization: Configure priority levels for different audio sources (e.g., emergency announcements override background music).

3.4 Visual Status Indicator

A built-in LED provides visual status information, indicating operational status or specific events.

Whakaahua: Mua view of the AXIS C1210-E speaker, highlighting the discreet LED indicator on the grille. This LED provides visual feedback on the speaker's status.

4. Tiaki

4.1 Remote Health Testing

The AXIS C1210-E supports remote health testing functionality, allowing you to verify the operational status of the speaker without physical inspection.

• Access this feature through the speaker's web interface or integrated management software.
• Regularly perform health tests to ensure continuous system functionality.

4.2 Te horoi

To maintain optimal performance and appearance, periodically clean the speaker.

• Whakamahia he kakahu ngohengohe, maroke hei muru i nga mata o waho.
• Avoid abrasive cleaners or solvents, as these can damage the finish.
• Ensure no moisture enters the speaker components.

5. Te Raru

This section provides solutions to common issues you might encounter with your AXIS C1210-E speaker.

5.1 No Power/No Network Connection

• Check PoE Source: Ensure the Ethernet cable is connected to a PoE-enabled switch or injector that is functioning correctly.
• Tikanga taura: Verify the Ethernet cable is not damaged and is securely connected at both ends.
• Tūnga Whatunga: Confirm that your network is operational and providing DHCP services if configured.

5.2 Kaore he Putanga Ororongo

• Tautuhinga Rōrahi: Check the volume settings in the speaker's web interface or your audio management application.
• Puna Ororongo: Ensure the audio source (e.g., VMS, SIP call, scheduled content) is active and correctly configured.
• Remote Health Test: Perform a remote health test to diagnose internal speaker component issues.

5.3 Ngā Take Ororongo Rua-Ara

• Tautuhinga hopuoro: Verify microphone sensitivity and gain settings in the web atanga.
• Waeaoro Waho: If using an external microphone, ensure it is properly connected and functional.
• Roopu Whatunga: High network latency can affect two-way audio quality. Check network performance.

5.4 Speaker Not Discoverable on Network

• Hononga Whatunga: Confirm physical network connection and PoE status.
• Wāhitau IP: Ensure the speaker is receiving an IP address (check DHCP server logs) or has a correctly configured static IP.
• Pātūahi: Check for any firewall rules on your network that might be blocking communication with the speaker.

6. Whakatakotoranga

Detailed technical specifications for the AXIS C1210-E Network Ceiling Speaker.

7. Nga Korero Whakaputanga

The AXIS C1210-E Network Ceiling Speaker comes with a limited warranty. For specific terms, conditions, and duration of your warranty, please refer to the official Axis Communications warranty documentation available on their webpaetukutuku, whakapā atu ranei ki to kaihoko whai mana.

Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.

8. Tautoko me nga korero Whakapā

For technical support, additional documentation, software downloads, and frequently asked questions, please visit the official Axis Communications support webpae:

www.axis.com/support

You may also contact your local Axis Communications representative or authorized reseller for assistance.