1. Kupu Whakataki
This manual provides comprehensive instructions for the installation and use of the VEMER VE786400 NOW KEO LCD ClickON Kit. This kit is designed to facilitate the integration of the Keo LCD thermostat with Bticino Living Now series plates, offering a seamless and aesthetically pleasing solution for your home climate control system. Please read these instructions carefully before proceeding with installation or operation to ensure proper functionality and safety.
2. Hua Neke Atuview
2.1. Nga Waenga kei roto
The VEMER VE786400 NOW KEO LCD ClickON Kit includes the following items:
- One (1) 3-module frame designed for Bticino Living Now series.
- One (1) white faceplate.
- One (1) black faceplate.
- One (1) sand-colored faceplate.
2.2. Nga waahanga matua
- Hototahi: Specifically designed for seamless integration with VEMER Keo LCD thermostats and Bticino Living Now plates.
- Kōwhiringa Tae: Includes three interchangeable faceplates (white, black, sand) to match various interior designs.
- Rauemi: Constructed from durable plastic for longevity.
- Whakauru Whare Ataata: Supports remote access and control via smart home systems or dedicated applications (when paired with a compatible Keo LCD thermostat).

Whakaahua 1: Ka mutuview of the VEMER VE786400 NOW KEO LCD ClickON Kit components. This image displays the black 3-module frame and the three included faceplates in white, sand, and black, ready for assembly.
3. Tatūnga me te Tāuta
Hiranga: Installation should be performed by a qualified electrician or technician to ensure safety and compliance with local electrical codes. Always disconnect power to the circuit before beginning installation.
- Momotu Hiko: Locate the circuit breaker controlling the thermostat's power supply and switch it to the OFF position. Verify that power is off using a voltage Kaiwhakamatautau.
- Remove Existing Plate (if applicable): Carefully remove any existing faceplate and frame from the wall box.
- Install the 3-Module Frame: Secure the provided 3-module frame into the wall box using appropriate screws. Ensure it is level and flush with the wall surface.
- Connect Keo LCD Thermostat: Follow the specific wiring instructions provided with your VEMER Keo LCD thermostat to connect it to the electrical wiring within the wall box.
- Mount the Keo LCD Thermostat: Mount the Keo LCD thermostat onto the 3-module frame according to its own instruction manual.
- Select and Attach Faceplate: Choose your desired faceplate (white, black, or sand). Align the chosen faceplate with the mounted thermostat and frame, then gently press it into place until it clicks securely.
- Whakaora i te Mana: Once all components are securely installed and the faceplate is attached, restore power to the circuit from the main breaker.
- Initial Setup of Thermostat: Refer to the VEMER Keo LCD thermostat's instruction manual for initial setup and configuration.
4. Nga Tohutohu Whakahaere
This ClickON Kit is an accessory for the VEMER Keo LCD thermostat. Its operation is entirely dependent on the functionality of the connected thermostat. Please refer to the specific instruction manual for your VEMER Keo LCD thermostat for detailed operating procedures, including:
- Te whakatakoto i te pāmahana.
- Programming schedules.
- Accessing smart home features.
- Troubleshooting thermostat-specific issues.
The faceplates provided in this kit are purely aesthetic and do not affect the operational functionality of the thermostat.
5. Tiaki
The VEMER VE786400 NOW KEO LCD ClickON Kit requires minimal maintenance.
- Te horoi: To clean the faceplates, gently wipe them with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Tirotiro: Periodically inspect the faceplate and frame for any signs of damage or loose connections. If any issues are observed, disconnect power and address them promptly.
6. Te Raru
This kit primarily provides aesthetic and mounting components. Most operational issues will relate to the VEMER Keo LCD thermostat itself. Refer to the thermostat's manual for specific troubleshooting steps.
However, if you encounter issues related to the kit components:
- Faceplate not fitting correctly: Ensure the 3-module frame is properly installed and the thermostat is correctly seated. Check for any obstructions.
- Loose faceplate: Verify that the faceplate is clicked into place firmly. If it remains loose, inspect the clips on the frame and faceplate for damage.
If problems persist, contact VEMER customer support or a qualified technician.
7. Whakatakotoranga
| Waitohu | VEMER |
| Tau tauira | VE786400 |
| Ingoa Tauira | NOW KEO LCD ClickON Kit |
| Hototahi | VEMER Keo LCD Thermostat, Bticino Living Now Series |
| Kōwhiringa Tae | White, Black, Sand |
| Rauemi | Kirihou |
| Ahu (Pake) | 12.8 x 12.4 x 3.6 cm |
| Taumaha Tūemi | 40 karamu |
| Voltage (Thermostat) | 230 Volts (Thermostat dependent) |
| Pūtake Hiko (Thermostat) | Battery Powered (Thermostat dependent) |
| Āhuahira Motuhake | Remote access and control via Smart Home system or application (with compatible thermostat) |
8. Pūtāhui me te Tautoko
Information regarding specific warranty terms for the VEMER VE786400 NOW KEO LCD ClickON Kit is not provided in the product details. For warranty inquiries, please refer to the documentation included with your purchase or contact VEMER customer support directly.
For technical support or assistance with installation and troubleshooting, please contact VEMER customer service through their official webte waahi me nga korero whakapiri e whakaratohia ana i roto i te kohinga hua.





