Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner User Manual

1. Kupu Whakataki

Thank you for choosing the Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.

Image: The Vacmaster VK1638SWC vacuum cleaner actively cleaning a workshop floor, demonstrating its industrial application.

2. Nga korero haumaru

Me whai tonu i nga tikanga tiaki haumaru ina whakamahi i tenei taputapu hei whakaiti i te tupono o te ahi, te ru hiko, te whara ranei.

• Panuitia nga tohutohu katoa i mua i te mahi i te kai horoi korehau.
• Kaua e waiho te taputapu kia kore e mataki ina honoa mai. Wewetehia mai i te putanga ka kore e whakamahia ana i mua i te mahi.
• Do not pick up hot ashes, coals, or flammable/combustible liquids.
• Kaua e whakamahia huri noa i nga wai pupuhi, i nga kohu ranei.
• Ensure all filters are correctly installed for the intended operation (wet or dry).
• Tiakina nga makawe, nga kakahu taratara, nga maihao, me nga wahanga katoa o te tinana mai i nga tuwhera me nga waahanga neke.
• Whakamahia anake kia rite ki te korero i roto i tenei pukapuka. Whakamahia anake nga taapiri a te kaiwhakanao.
• Kaua e whakamahia ki te taura pakaru, mono ranei. Mena karekau te taputapu i te mahi e tika ana, kua taka, kua pakaru, kua waiho ki waho, kua taka ranei ki te wai, whakahokia ki te pokapū ratonga.
• Kaua e toia, kaua e haria ma te taura, whakamahia te aho hei kakau, kati he kuaha ki te taura, toia ranei te aho ki nga taha koi, ki nga kokonga ranei. Kaua e rere te taputapu ki runga i te taura. Kia matara atu te taura mai i nga papanga wera.
• Kaua e wetewete ma te toia te taura. Hei wetewete, mauhia te mono, kaua ki te taura.
• Kaua e hapai i te mono me te taputapu ma nga ringa makuku.
• Whakawetohia nga mana katoa i mua i te tango.
• Me tino tupato ki te horoi i nga arawhata.
• Kaua e whakamahi ki te kohi i nga wai ka mura, ka wera ranei, penei i te penehīni, te whakamahi ranei i nga waahi kei reira.
• Kaua e kohia tetahi mea e wera ana, e kai paipa ana ranei, penei i te hikareti, te mati, te pungarehu wera ranei.
• Kaua e whakamahi me te kore he tātari.
• Ko tenei taputapu ehara i te mea mo te whakamahi ma te hunga (tae atu ki nga tamariki) he iti te kaha o te tinana, te tairongo, te hinengaro, te kore wheako me te mohiotanga, mena ka tukuna atu ki a raatau te tirotiro, te tohutohu ranei mo te whakamahi i te taputapu e te tangata whai mana mo to raatau haumaru.
• Me mataki nga tamariki kia kore ai ratou e takaro ki te taputapu.

3. Ihirangi mokete

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact Vacmaster customer support.

• 1 x Dust Extractor Unit
• 1 x HEPA 13 Cartridge Filter
• 1 x HEPA Exhaust Filter
• 1 x Pre-filter (washable)
• 1 x Tātari Foam
• 2 x Ngongo Toronga
• 1 x Handle with Air Flow Control
• 1 x Universal Floor Head
• 1 x Dual Mode Floor Head
• 1 x Anti-crush Hose
• 1 x Round Dusting Tool
• 1 x Extra-large Crevice Tool
• 1 x Universal Power Tool Adaptor
• 1 x Accessory Pouch
• 1 x 38L Hygiene Seal Dust Bag

Image: The Vacmaster VK1638SWC unit displayed with its full range of included accessories.

4. Tatūnga

4.1 Te Huihuinga i te Korehau

1. Whakapirihia nga Kaipara: Insert the casters into the designated slots on the base of the vacuum until they click securely into place.
2. Āpiti Kakau: Secure the handle to the top of the unit using the provided hardware.
3. Hononga ngongo: Insert the anti-crush hose into the suction inlet on the front of the tank. Ensure it is firmly seated.
4. Tāuta Tātari: Refer to section 4.2 for specific filter installation based on your intended use (wet or dry).

Whakaahua: He tata view of the yellow latch, indicating how to secure or release the motor head from the tank.

4.2 Tāuta Tātari

The VK1638SWC uses different filters for wet and dry applications. Always ensure the correct filter is installed before operation.

• Mo te horoi horoi maroke: Install the HEPA 13 Cartridge Filter and the washable Pre-filter. Ensure the HEPA Exhaust Filter is also in place. The 38L hygiene seal dust bag can be used for improved dust collection and disposal.
• Mo te horoi horoi maku: Remove the HEPA 13 Cartridge Filter and Pre-filter. Install the Foam Filter over the filter cage. Do NOT use the dust bag for wet vacuuming.

Image: A person demonstrating the process of accessing and handling the filter inside the vacuum cleaner's tank.

5. Nga Tohutohu Whakahaere

5.1 Maama maroke

1. Ensure the HEPA 13 Cartridge Filter and Pre-filter are correctly installed.
2. Connect the desired extension tubes and floor head (universal or dual mode) or other accessory to the hose.
3. Monohia te taura hiko ki te putanga hiko e tika ana (240 Volts).
4. Turn the vacuum cleaner ON using the power switch.
5. Begin vacuuming the dry debris.
6. Ka mutu, whakawetohia te korehau ka wetekina.

Image: The Vacmaster VK1638SWC vacuum cleaner fully assembled with its hose, extension tubes, and floor head.

5.2 Makuku Makuku

1. Ensure the Foam Filter is correctly installed and the HEPA 13 Cartridge Filter and Pre-filter are removed.
2. Connect the desired floor head or accessory suitable for wet pickup to the hose.
3. Monohia te taura hiko ki tetahi putanga hiko pai.
4. Turn the vacuum cleaner ON.
5. Begin vacuuming liquids. The vacuum has an automatic shut-off feature that will stop suction when the tank is full.
6. When finished or when the tank is full, turn the vacuum OFF and unplug it. Empty the tank as described in the Maintenance section.

Image: The Vacmaster VK1638SWC vacuum cleaner demonstrating its liquid draining capability from the tank's outlet.

5.3 Mahi Whakatangitangi

The VK1638SWC can also function as a powerful blower.

1. Ensure the tank is empty and clean, and the appropriate filter is installed (HEPA for dry blowing, no filter or foam filter for wet blowing).
2. Remove the hose from the suction inlet.
3. Insert the hose into the blower port located on the motor head.
4. Plug in and turn ON the vacuum to use the blower function.

5.4 Power Tool Connection

The included universal power tool adaptor allows for direct dust extraction when working with power tools.

1. Ensure the vacuum is set up for dry vacuuming with the HEPA 13 filter.
2. Connect the universal power tool adaptor to the end of the vacuum hose.
3. Attach the other end of the adaptor to the dust extraction port on your power tool.
4. Plug the power tool into the integrated power socket on the vacuum cleaner (if available and compatible). This allows the vacuum to start automatically when the power tool is activated.
5. Turn on the vacuum cleaner and then your power tool to begin dust extraction.

Image: The Vacmaster VK1638SWC vacuum cleaner connected to a sanding machine, demonstrating its dust extraction capability.

5.5 Using the Wheel Brake

To secure the vacuum cleaner in place, engage the wheel brake by pressing down on the lever located on one of the casters. To release, lift the lever.

Image: A person's foot pressing down on the yellow lever to engage the wheel brake on the vacuum cleaner.

6. Tiaki

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner. Always unplug the unit before performing any maintenance.

6.1 Tātari me te Whakakapi

• HEPA 13 Cartridge Filter & Pre-filter: For dry use, these filters should be cleaned regularly by tapping them gently to dislodge dust or by using a soft brush. The pre-filter is washable; rinse with water and allow to air dry completely before reinstallation. Replace the HEPA cartridge filter when suction power significantly decreases or if it becomes damaged.
• Tātari pahuka: For wet use, the foam filter should be rinsed with water after each use and allowed to air dry completely before storage or next use.
• Tātari Pūwero HEPA: Check periodically and replace if visibly dirty or if air quality issues are noted.

6.2 Tank Cleaning and Emptying

• Parapara maroke: Unlatch the motor head and carefully lift it off. Remove the dust bag (if used) and dispose of contents. Empty any remaining debris from the stainless steel tank.
• Waiwai: For liquid disposal, the tank can be emptied by tilting the unit or by using the drain plug located at the bottom of the tank. After emptying, rinse the tank with water and wipe dry to prevent odors and corrosion.

6.3 Pupuri Taonga

The VK1638SWC features integrated storage for its accessories, keeping them organized and readily accessible.

Image: The Vacmaster VK1638SWC vacuum cleaner showcasing its onboard storage for hose, power cord, and various attachments.

7. Te Raru

I mua i te whakapā atu ki te tautoko kiritaki, tirohia te ripanga e whai ake nei mo nga take noa me o raatau otinga.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

9.1 Nga Korero Whakaputanga

The Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner comes with a 2-tau pūtāhui from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repairs, or lack of maintenance.

9.2 Tautoko Kiritaki

For technical assistance, warranty claims, or to order replacement parts, please contact Vacmaster customer support. Refer to the contact information provided with your purchase documentation or visit the official Vacmaster webpae.