MOMAN Motorcycle Helmet Intercom

Kupu Whakataki

The MOMAN H3 Motorcycle Helmet Intercom is designed to provide clear communication and entertainment for riders. This wireless headset supports up to 6 riders for real-time conversations over a range of up to 2000 meters. It features DSP and CVC noise cancellation for superior sound quality, hands-free calling, music streaming, and FM radio. The H3 is built with IP65 waterproof rating and a robust design to withstand various weather conditions, making it suitable for most open-face, modular, and full-face helmets.

Image: The MOMAN H3 Motorcycle Helmet Intercom unit, showcasintōna hoahoa kiato me te kakau whakahaere.

Ihirangi mokete

I mua i te whakaurunga, tirohia koa kei reira nga waahanga katoa:

• MOMAN H3 Intercom Unit
• Headset with 40mm Speakers and Microphone
• Mounting Bracket (Clip-on)
• Velcro Mounting Base
• Tauira Whakatau USB
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Tatūnga me te Tāuta

Proper installation ensures optimal performance and comfort.

1. Kōwhiria te Tikanga Whakamau

The H3 intercom can be installed using either the clip-on bracket or the adhesive Velcro base.

• Taiapa Topenga: Slide the bracket onto the edge of your helmet shell. Ensure it is securely fastened. This method is generally more secure and allows for easier removal.
• Velcro Mounting Base: Clean the desired mounting area on your helmet. Peel off the adhesive backing from the Velcro base and firmly press it onto the helmet. Allow sufficient time for the adhesive to cure before attaching the intercom unit.

2. Install Speakers and Microphone

Position the speakers inside the helmet's ear pockets. Ensure they are centered over your ears for the best audio experience. Route the microphone towards your mouth, ensuring it is close enough for clear voice pickup but does not obstruct your vision or comfort. Secure all wires within the helmet padding to prevent interference.

3. Ka tohatohahia te Pūrere

Before first use, fully charge the H3 intercom. Connect the provided USB charging cable to the intercom unit and a compatible USB power source. The charging indicator light will show the charging status. A full charge provides approximately 30 hours of continuous use and 500 hours of standby time.

Nga Tohutohu Whakahaere

Familiarize yourself with the control knob and buttons for seamless operation.

Te Hiko / Whakaweto

• Whakahiko: Patohia me te pupuri i te paatene Hiko mo te 3 hēkona kia whiti te rama tohu.
• Weto Whakakore: Pēhia me te pupuri i te pātene Mana mō te 3 hēkona pea tae noa ki te wā e mate ai te rama tohu.

Bluetooth Pairing (Phone)

1. Ensure the H3 is powered off.
2. Pēhia, pupuritia te pātene Mana mō te 5-7 hēkona pea kia mura te rama whero me te kikorangi, e tohu ana i te aratau takirua.
3. On your mobile phone, enable Bluetooth and search for "MOMAN H3".
4. Select "MOMAN H3" to connect. Once paired, the indicator light will flash blue slowly.

Intercom Pairing (Multi-Rider)

The H3 supports communication with up to 6 riders. For optimal performance, pair devices in sequence.

1. Ensure both intercom units are powered off.
2. On the first unit, enter pairing mode (press and hold Power for 5-7 seconds).
3. On the second unit, enter pairing mode.
4. Once both are in pairing mode, briefly press the Intercom button on either unit to initiate pairing. The units will connect automatically.
5. Repeat this process for additional units, pairing each new unit to the last one in the chain.

Purei Waiata

• Purei/Tatari: Briefly press the Multi-function button (often integrated with the knob).
• Riu Panuku: Hurihia te puku karaka.
• Riu o mua: Rotate the knob counter-clockwise.
• Rōrahi Whakarunga/Whakararo: Rotate and hold the knob clockwise/counter-clockwise.

Waea Waea

• Whakautu Waea: Pēhia te pātene Maha-mahi mō te wā poto.
• Whakakore Waea: Patohia me te pupuri i te paatene Maha-mahi mo te 2 hēkona.
• Whakairi: Briefly press the Multi-function button during a call.
• Kaiawhina Reo: Double-press the Multi-function button (if supported by your phone).

Irirangi FM

• Whakakā/Whakaweto i te FM: Patohia te paatene FM.
• Matawai Hongere: Rotate the knob to search for available stations.

Te tiaki

Proper care extends the life and performance of your H3 intercom.

• Te horoi: Whakamahia he ngohengohe, damp cloth to wipe the intercom unit. Avoid harsh chemicals or abrasive cleaners. Ensure the charging port cover is securely closed before cleaning.
• Rokiroki: When not in use for extended periods, store the device in a cool, dry place. It is recommended to charge the battery at least once every three months to maintain battery health.
• Ātete wai: The H3 is IP65 waterproof, meaning it is protected against dust and low-pressure water jets. While it can withstand rain, avoid submerging the device in water. Ensure all port covers are sealed during wet conditions.
• Tiaki Pūhiko: Do not expose the battery to extreme temperatures. Avoid fully discharging the battery frequently, as this can reduce its lifespan.

Raparongoā

Mena ka raru koe, tirohia nga rongoa e whai ake nei:

Whakatakotoranga

Pūtāhui me te Tautoko

MOMAN products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official MOMAN website. If you require technical assistance or have questions not covered in this manual, please contact MOMAN customer support through their official channels.

Tautoko Aipurangi: Visit the Moman Store on Amazon