Pukapuka Whakaakoranga mō te Nohoanga Waka Pēpi Graco Premier SnugRide SnugFit XT

Kupu Whakataki

This manual provides essential instructions for the safe and proper use, installation, and maintenance of your Graco Premier SnugRide SnugFit XT Infant Car Seat. This car seat is designed to protect rear-facing infants weighing from 4 to 30 pounds and up to 32 inches in height. Please read all instructions carefully before using the car seat and retain this manual for future reference.

Image: The Graco Premier SnugRide SnugFit XT Infant Car Seat, featuring its integrated base and adjustable canopy.

Nga korero haumaru

Your Graco Premier SnugRide SnugFit XT Infant Car Seat is engineered with advanced safety features to provide optimal protection for your child.

• Pae Ārai-Whakahoki: This feature provides an additional layer of rear-facing safety by limiting the rotation of the car seat and your child in the event of an impact.
• ProtectPlus Engineered: This car seat has undergone a combination of the most rigorous crash tests to help protect your child in frontal, side, rear, and rollover crashes.
• Pūnaha Herenga 5-Pōnaha: The built-in 5-point harness system is designed to secure your child safely and has been side-impact tested according to FMVSS 213a.

Image: The car seat installed rear-facing in a vehicle, demonstrating the Anti-Rebound Bar.

Tatūnga me te Tāuta

Proper installation is crucial for your child's safety. Always refer to your vehicle's owner's manual for specific car seat installation instructions.

Installing the Car Seat Base

1. Position the car seat base on the vehicle seat in a rear-facing orientation.
2. Whakamahia te SnugLock Technology for quick and secure installation. You can choose between your vehicle's LATCH system or the vehicle seat belt.
3. For LATCH installation, attach the LATCH connectors to your vehicle's lower anchors. Tighten the strap until the base is firmly secured and does not move more than one inch side-to-side or front-to-back at the belt path.
4. For seat belt installation, route the vehicle's lap and shoulder belt through the designated belt path on the base. Engage the SnugLock arm to secure the belt tightly. Ensure the base is stable.
5. Verify the recline angle indicator on the base shows the correct angle for your infant's weight. Adjust the recline foot as needed.

Image: Demonstrating the installation of the car seat base using SnugLock technology.

Attaching the Infant Car Seat to the Base

1. Align the infant car seat with the base.
2. Lower the car seat onto the base until you hear an audible 'click', indicating it is securely latched.
3. Always check that the car seat is firmly attached to the base by lifting it slightly.

Nga Tohutohu Whakahaere

Familiarize yourself with the car seat's adjustable features for your child's comfort and safety.

• Simply Safe Adjust Harness System: The headrest and harness can be adjusted together with a single motion, without rethreading, while your child is in the seat. This ensures a proper fit as your child grows.
• Silent Shade Canopy with Privacy Drape: The canopy and integrated privacy drape adjust quietly, minimizing disturbance to a sleeping infant.
• One-Hand Adjustable Handle: The car seat handle can be adjusted with one hand, simplifying the process of getting your baby in and out of the car seat.
• Integrated Storage Pocket: A convenient storage pocket is located on the side of the seat for small personal items.

Image: Feature diagram of the car seat, illustrating its various adjustable components.

Whakaahua: Kati-ake view of the easy-adjust harness system for a perfect fit.

Te tiaki

Regular cleaning and maintenance will help prolong the life of your car seat.

• Rapid Remove Seat Pad: The seat pad is designed for quick and easy removal, facilitating cleaning. Refer to the care tag for specific washing instructions. Typically, machine wash cold on a delicate cycle and air dry.
• Te Here me te Here: Horoihia nga here o te hiku ki te panuiamp cloth. Do not machine wash or immerse the harness in water, as this may weaken the webbing. Clean the buckle by rinsing it with warm water.
• Ngā Wāhanga Kirihou me te Mea Whakarewa: Wipe plastic and metal parts with mild soap and cool water. Do not use abrasive cleaners or solvents.

Raparongoā

Mena ka pā mai he raruraru ki tō nohoanga waka, tēnā tirohia anōview nga otinga noa e whai ake nei:

• He uaua ki te whakaurunga: Ensure the LATCH connectors or vehicle seat belt are routed correctly and tightened sufficiently. The base should not move more than one inch in any direction at the belt path. Check the recline angle indicator.
• Harness Adjustment Issues: Confirm that the Simply Safe Adjust handle is fully engaged. Ensure no fabric or debris is obstructing the harness mechanism.
• Car Seat Not Latching to Base: Verify that the car seat is properly aligned with the base and pushed down firmly until an audible 'click' is heard. Inspect for any obstructions in the latching mechanism.
• General Concerns: For any persistent issues or questions not covered here, please refer to the full product manual included with your purchase or contact Graco customer support.

Whakatakotoranga

Pūtāhui me te Tautoko

For detailed warranty information, product registration, or to contact customer support, please visit the official Graco website or refer to the warranty card included with your product. Keeping your proof of purchase is recommended for warranty claims.