1. Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.
2. Nga Tohutohu Haumaru
- Haumaru Hiko: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
- Voltage: This product operates on a 230V AC power supply.
- Whakatauranga IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
- Puna Maama: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
- Te Waahi Mahi: Ensure the operating environment is within the specified temperature range to prevent damage.
3. Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
- Mounting accessories (screws, wall plugs, foam pads)
Figure 2: Included mounting accessories.
4. Tatūnga me te Tāuta
A pee i enei taahiraa mo te whakauru tika:
- Momotu Mana: I mua i te tīmatanga, kia tino whakawetohia te pūtake hiko matua ki te wāhi tāutanga i te pūwāhi ara iahiko.
- Whakapaia te Mata Maunga: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
- Āpiti Taiapa Whakapuru: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Whakaahua 3: Whakamuri view with mounting bracket.
- Waea waea: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Figure 4: Wiring terminal connection points.
- Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
- Whakaora i te Mana: Switch the main power supply back on.
5. Nga Tohutohu Whakahaere
The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.
Mahi a te Pūoko Nekehanga
- The microwave motion detector reacts to movement within a range of up to 6 meters.
- Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
- The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.
Adjusting Sensor Settings (DIP Switches)
The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.
Figure 5: DIP switches for sensor configuration.
Refer to the markings next to the DIP switches for specific settings related to:
- Awhe Rapunga: Adjusts the maximum distance at which motion is detected.
- Waa Pupuri: Sets the duration the light remains on after the last detected motion.
- Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.
Tuhipoka: Always disconnect power before adjusting DIP switches to avoid electrical hazards.
6. Tiaki
- Te horoi: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
- Parenga Ngarara: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
- Kaore he waahanga e taea ana e te Kaiwhakamahi: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.
7. Te Raru
If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | Karekau he hiko. Waea hape. He teitei rawa te tautuhinga o te pūoko awatea. | Check circuit breaker and power connection. Verify wiring connections (Live, Neutral). Adjust the daylight sensor (Lux) setting on the DIP switches. |
| Ka mau tonu te rama. | I kitea te nekehanga tonu. He roa rawa te pupuri i te tautuhinga wā. Pūoko hē. | Ensure no constant movement in the detection area. Adjust the hold time setting on the DIP switches to a shorter duration. Ki te mau tonu te raruraru, whakapā atu ki te tautoko. |
| Light turns on/off too frequently. | He tiketike rawa te tairongo. Detection range too wide. | Reduce the sensitivity and/or detection range using the DIP switches. |
| Sensor does not detect motion. | Sensitivity too low. Detection range too narrow. Obstruction blocking sensor. Daylight sensor setting too low (light always on). | Increase sensitivity and/or detection range via DIP switches. Ensure no large metal objects or thick walls are directly in front of the sensor. Adjust the daylight sensor (Lux) setting. |
8. Whakatakotoranga
| Waitohu | EMOS |
| Tau tauira | ZM4328 |
| Ahu (Diamita x Teitei) | 220 mm x 53 mm (tata ki te 8.66 inihi x 2.09 inihi) |
| Taumaha | 622 karamu (tata ki te 1.37 lbs) |
| Mana | 15 Watts |
| Rerewharewha | 1500 rama |
| Te Paemahana Tae | 4000 Kelvin (Kūpapa Mā) |
| Taupū Whakaatu Tae (CRI) | 80 |
| Incandescent Equivalence | 100 Watts |
| Voltage | 230 Volts AC |
| Whakatauranga IP | IP54 |
| Rauemi | Acrylonitrile Butadiene Styrene (ABS), Plastic diffuser |
| Nga waahanga motuhake | Microwave Motion Detector, Energy-saving, Waterproof |
| Karaehe Pungao Pungao | E (on new scale from 1.9.2021) |
Whakaatu 6: Te rahi o te hua.
Figure 7: Energy Efficiency Label (Class E).
9. Pūtāhui me te Tautoko
Pūtāhui
This EMOS ZM4328 TORI LED Ceiling Light comes with a 3-tau pūtāhui mai i te ra o te hokonga. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana. Ka kapi te raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa.
Tautoko Kiritaki
For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webpae.
