BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Kupu Whakataki

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Nga waahanga hua

• Pūoko Nekehanga Whakakotahi: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• E toru nga momo mahi:
  • Aratau Aunoa: Light activates when motion is detected in dark conditions.
  • Aratau KI: Light remains constantly on.
  • Aratau G: Light activates when motion is detected in both daytime and nighttime conditions.
• E toru nga Pawera Tae: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Hoahoa Tino-Angiangi: Pro-itifile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Tāuta maha: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Manual Tohutohu (tenei tuhinga)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Nga korero haumaru

WHAKATŪPATO: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Me whakarite kua whakaweto te pūhiko i mua i te whakamahi i tētahi waea.
• Kua hangaia tēnei taputapu mō te tuku hiko 120V AC.
• Kaua e ngana ki te whakarerekē i te taputapu.
• Tiakina nga tamariki mai i te waahi whakauru.

Tatūnga me te Tāuta

A pee i enei taahiraa mo te whakauru tika:

1. Whakaritea mo te Tāuta:
   • Whakawetohia te hiko i te whati ara iahiko i mua i te tīmatanga.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Tāuta Taiapa Whakapuru:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Hononga Waea:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Whakanuia te Maama:
   • Tuhia nga waea katoa ki roto i te pouaka honohono.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Whakaora i te Mana: Whakahokia ano te hiko i te ara iahiko.

Whakaahua 4: He aratohu tirohanga mo te tukanga whakauru.

Nga Tohutohu Whakahaere

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Kei te whiriwhiri i te Aratau Mahi:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • MOTO: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 hēkona
   • 120S: 120 hēkona (2 meneti)
   • 180S: 180 hēkona (3 meneti)

Figure 5: Switches for adjusting hold time and operating modes.

Te tiaki

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Te horoi: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Maamaa LED: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Tirotiro: Tirohia te pūhiko i ia wā, i ia wā, mēnā he tohu pakaru, he hononga ngoikore rānei. Mēnā ka kitea he raruraru, momotuhia te hiko, ka kōrero ki tētahi tohunga hiko whai tohu.

Raparongoā

Mena ka pāngia koe e ngā raruraru me ngā otinga e pā ana ki tō rama, tirohia ngā raruraru me ngā otinga e whai ake nei:

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webpae. Puritia to riiki hoko hei tohu mo te hoko.