VIVO STAND-TV22B

VIVO STAND-TV22B Mobile TV Cart Instruction Manual

Model: STAND-TV22B

1. Kupu Whakataki

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-TV22B Aluminum Mobile TV Cart. This heavy-duty stand is designed to securely hold screens from 32 to 100 inches, weighing up to 220 lbs, with VESA patterns ranging from 200x200mm to 1000x600mm. It features mobile casters, a sturdy middle shelf, and tilt/height adjustment for optimal viewing.

2. Nga korero haumaru

WARNING: Read and understand all instructions before use. Failure to follow these instructions may result in serious injury or damage.

3. Ihirangi mokete

Please verify that all parts are included in your package. If any parts are missing or damaged, contact VIVO customer support.

4. Whakatakotoranga

WaitohuVIVO
Tau tauiraTu-TV22B
RauemiKonumohe, Steel
TaePango
Hototahi Rahi Mata32" ki te 100"
Taumaha TaumahaTae atu ki te 220 lbs (100 kg)
VESA Hototahi200x200mm ki te 1000x600mm
Whakatikatika Teitei48" to 68" (center of screen)
Koki Honga+5° ki te -10°
Hunga Hua45" x 27.5" x 94" (L x W x H, top shelf to floor)
Taumaha Tūemi70.4 lbs

Note: All measurements are approximate.

5. Tatūnga me te Runanga

Follow these steps carefully to assemble your VIVO Mobile TV Cart. It is recommended to have assistance during certain steps, especially when mounting the television.

Aratohu Ataata Huihuinga

Whakaahuatanga Ataata: This official VIVO assembly video provides a visual guide for setting up the mobile TV cart. While the video references model STAND-TV22S, the assembly process is highly similar to the STAND-TV22B. It demonstrates each step from unboxing to final TV mounting, covering assembling the base, columns, shelves, and attaching the TV.

Nga Tohutohu Huihuinga-a-Taahiraa

Hipanga 1: Huihuia te turanga

Attach the four locking casters to the base frame using the provided hardware. Ensure they are securely tightened with the open-end wrench.

Image of the VIVO TV cart base with four locking casters

Whakaahuatanga Whakaahua: He tata view of the sturdy base of the VIVO mobile TV cart, highlighting one of the quad locking casters. The caster is black with a metal bracket, designed for stability and mobility.

Step 2: Extend the Vertical Support Columns

Carefully extend the inner sections of the vertical support columns. Secure them in the extended position using the provided pins or locking mechanisms.

Step 3: Attach Columns to Base and Handles

Secure the two extended vertical support columns to the assembled base using the designated screws and the Allen wrench. Attach the decorative handles to the top of the columns.

Image of the VIVO TV cart with a TV mounted, showing the dual vertical support columns

Whakaahuatanga Whakaahua: The VIVO mobile TV cart with a large television mounted, positioned in a modern office setting. The dual vertical support columns are visible, extending from the base to the TV mounting plate.

Step 4: Install TV Mounting Plate

Attach the horizontal TV mounting plate to the top of the vertical support columns. Use the provided screws and ensure it is level and securely fastened.

Image showing the back of a TV mounted on the VIVO cart, highlighting the mounting plate

Whakaahuatanga Whakaahua: He muri view of a television mounted on the VIVO TV cart, showcasing the horizontal mounting plate and the vertical brackets attached to the TV. This illustrates the "Easy Installation" feature.

Step 5: Secure Columns to the Base (Covers)

Place the plastic covers over the base connections of the vertical columns and secure them with the appropriate fasteners to complete the base assembly.

Step 6: Attach Middle Shelf (DVD Tray)

Attach the middle shelf to the desired height on the vertical columns using the provided hardware. This shelf is suitable for laptops, DVD players, or streaming devices.

Image of the VIVO TV cart with a laptop on the middle shelf and a webcam on the top shelf

Whakaahuatanga Whakaahua: The VIVO mobile TV cart in an office setting, displaying a laptop on its adjustable middle shelf and a webcam on the top shelf, demonstrating its utility for presentations or video conferencing.

Step 7: Install the Television

Carefully attach the TV mounting brackets to the back of your television using the appropriate VESA screws and spacers from the hardware kit. Refer to your TV's manual for specific VESA hole patterns. With assistance, lift your television and hook the attached mounting brackets onto the horizontal mounting plate. Secure the TV to the plate using the safety screws or locking mechanisms provided.

Hipanga 8: Tāpirihia te Whata Runga

The smaller top shelf can be installed above the TV for a webcam or camera, securing it with the provided hardware.

Hipanga 9: Whakahaere taura

Utilize the integrated cable management system within the vertical columns to route and conceal cables for a clean and organized appearance.

6. Nga Tohutohu Whakahaere

Te neke i te Kaata

To move the TV cart, unlock all four casters by flipping their locking levers. Carefully push the cart to your desired location. Once positioned, lock all casters to ensure stability.

Whakatikatika Teitei

The TV cart allows for height adjustment from 48" to 68" (center of screen). To adjust, loosen the locking mechanisms on the vertical columns, carefully raise or lower the TV to the desired height, and then securely tighten the locking mechanisms. It is recommended to remove the TV before significant height adjustments for safety.

Image showing the tilt and height adjustment features of the VIVO TV cart

Whakaahuatanga Whakaahua: He taha view of the VIVO mobile TV cart with a television, illustrating the telescoping height adjustment feature and the tilt range of +5° to -10° for optimal viewnga koki.

Whakaritea Tilt

The TV mounting brackets allow for a tilt range of +5° to -10°. Loosen the tilt adjustment knobs on the side of the TV brackets, adjust the screen to your preferred angle, and then tighten the knobs to secure the position.

7. Tiaki

8. Te Raru

RaruraruTake peaRongoā
Cart is unstable or wobbles.Loose fasteners; uneven floor; overloaded.Check and tighten all screws. Move to a level surface. Ensure TV weight is within limits.
Difficulty moving the cart.Casters are locked; debris in casters.Unlock all casters. Clean any debris from the wheels.
Ko te pouaka whakaata ehara i te taumata.Mounting plate or brackets are uneven.Adjust the TV mounting brackets or re-level the horizontal mounting plate.
Cables are visible or messy.Kāore i whakamahia te whakahaere taura.Route cables through the integrated cable management system in the vertical columns.

9. Pūtāhui me te Tautoko

VIVO products are designed for quality and durability. For specific warranty information, please refer to the product packaging or the official VIVO website. If you encounter any issues or require assistance, please contact VIVO customer support.

For the most up-to-date information, visit the official VIVO store or contact their support directly.

Tuhinga e pa ana - Tu-TV22B

Preview VIVO Mobile TV Cart STAND-TV22S Series Assembly Manual
Assembly manual for the VIVO Mobile TV Cart STAND-TV22S Series, providing step-by-step instructions, safety warnings, package contents, and hardware details for mounting televisions.
Preview Pukapuka Whakaminenga mō te Kete Pouaka Whakaata Waea VIVO STAND-TV04M Raupapa
He tohutohu whakahiato taipitopito mō te VIVO STAND-TV04M Series Mobile TV Cart. Kei roto i tēnei aratohu ngā tohutohu taahiraa-i-te-taahiraa, te rārangi wāhanga, me ngā mōhiohio haumaru mō te whakahiato i tō tūnga pouaka whakaata pūkoro VIVO.
Preview VIVO Mobile TV Cart Tohutohu: STAND-TV02PB/PW
He pukapuka tohutohu matawhānui mo te Vivo Mobile Portrait to Landscape TV Cart (STAND-TV02PB/PW), e whakamaarama ana i nga hikoinga huihuinga, i roto i nga kete, nga whakatupato haumaru, me nga whakaritenga hua mo te whakairi pouaka whakaata ki te 154 lbs.
Preview Pukapuka Tohutohu mō te Pouaka Whakaata Mata Nui a VIVO mō te Waea Pūkoro Konumohe
He pukapuka tohutohu mō te Kete Pouaka Whakaata Mata Nui Waea Konumohe VIVO STAND-TV120B, e whakaatu ana i ngā mahi huihui, ngā ihirangi o te kete, ngā whakatūpato, me ngā whakaritenga mō te whakairi i ngā mata nunui.
Preview Pukapuka Tohutohu mō te Pouaka Whakaata Waea Matarua VIVO STAND-TV03E2
He pukapuka tohutohu mō te Kete Pouaka Whakaata Mata-Rua a VIVO (SKU: STAND-TV03E2). E whakarato ana i ngā mahi taipitopito mō te huihuinga, ngā ihirangi o te kete, te tautuhi taputapu, me ngā aratohu haumaru.
Preview VIVO STAND-TV86RD Black Heavy Duty Studio TV Cart with Wooden Shelf Assembly Manual
Comprehensive assembly manual for the VIVO STAND-TV86RD Black Heavy Duty Studio TV Cart with Wooden Shelf. Includes parts list, hardware, tools, and step-by-step instructions for safe and proper installation.