Silverstone Technology FHS 80X 80mm PWM Industrial/Server Fan Instruction Manual
Model: SST-FHS80X
1. Kupu Whakataki
The Silverstone Technology FHS 80X is a high-performance 80mm fan designed for industrial and server applications. Its 38mm thick profile and steeply raked fan blades contribute to high airflow and air pressure. This fan features 4-pin PWM control for adjustable speed and dual ball bearings for extended durability. This manual provides essential information for the proper installation, operation, and maintenance of your FHS 80X fan.
2. Nga korero haumaru
Please read and understand all safety instructions before installing or operating the fan. Failure to do so may result in personal injury or damage to the product.
- Ensure power is disconnected from the system before installation or maintenance.
- Kaua e pā ki ngā mata o te pā hau i te wā e whakahaerehia ana.
- Install the fan in a well-ventilated area.
- Do not expose the fan to moisture or extreme temperatures.
- Use only the provided or recommended mounting hardware.
Figure 2.1: A protective fan grill, an essential safety component to prevent accidental contact with moving fan blades.
3. Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i te kete:
- Silverstone FHS 80X Fan (1 unit)
- Fan grill (1 unit)
- Mounting screws (4 units)
Whakaahua 3.1: Mua view of the Silverstone FHS 80X fan with the protective grill installed. This image shows the fan blades and the metal grill designed to prevent accidental contact.
4. Hua Neke Atuview
The FHS 80X fan is engineered for demanding cooling environments. Key features include:
- Ahu: 80mm x 80mm x 38mm (thickness)
- Mana PWM: 4-pin connector for precise speed regulation.
- Momo Kawe: Dual ball bearing for enhanced longevity.
- Hoahoa Mata: Giant-bladed design for high static pressure and airflow.
Whakaahua 4.1: Te taha profile of the FHS 80X fan, illustrating its substantial 38mm thickness which contributes to its high performance capabilities.
Figure 4.2: An exploded diagram showcasing the fan's superior motor construction and dual ball bearings, designed for reduced friction and extended lifespan.
Whakaahua 4.3: Whakamuri view of the FHS 80X fan, displaying the product label with model number and electrical specifications.
5. Tatūnga me te Tāuta
Follow these steps to properly install your FHS 80X fan:
- Whakapaia te Pūnaha: Power off your computer or server and disconnect it from the power source. Open the chassis to access the fan mounting location.
- Maungahia te Poho: Position the fan in the desired location, ensuring correct airflow direction. Use the provided mounting screws to secure the fan to the chassis. The fan grill should be placed on the intake side to protect against foreign objects.
- Honoa te Mana: Locate an available 4-pin PWM fan header on your motherboard or fan controller. Connect the fan's 4-pin connector to this header. Ensure the connector is fully seated.
Figure 5.1: The 4-pin PWM connector of the FHS 80X fan, which allows for precise speed control when connected to a compatible motherboard header.
Whakaahua 5.2: He koki view of the fan, showing the pre-installed protective grill and the corner screw holes for mounting.
6. Nga Tohutohu Whakahaere
The FHS 80X fan utilizes Pulse Width Modulation (PWM) for speed control, allowing for dynamic adjustment based on system temperature or user preference.
- Mana Aunoa: When connected to a PWM-compatible motherboard header, the fan speed will automatically adjust based on the system's thermal load, as configured in the BIOS/UEFI settings.
- Mana a-ringa: Many motherboards and fan controllers offer software utilities to manually set fan curves or fixed speeds. Refer to your motherboard or controller manual for specific instructions.
- Awhe Tere: The fan operates within a speed range of 2,000 RPM to 10,000 RPM, providing significant cooling capacity.
Figure 6.1: A graph illustrating the relationship between PWM duty cycle percentage and the resulting fan speed in RPM, demonstrating the precise control offered by the 4-pin PWM cable.
7. Tiaki
Mā te tiaki auau ka āwhina i te mahi tino pai, ā, ka roa ake te ora o tō pā hau.
- Te horoi: Periodically clean dust accumulation from the fan blades and grill using compressed air or a soft brush. Ensure the system is powered off before cleaning.
- Tirotiro: Check for any obstructions around the fan or damage to the blades or wiring.
- Tiaki Whanau: The dual ball bearings are designed for long-term operation and typically do not require lubrication.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te paahi e huri | No power, loose connection, faulty fan header. | Check power connections. Ensure 4-pin connector is fully seated. Try a different fan header. |
| Fan spinning too slow/fast | Incorrect BIOS/UEFI settings, fan controller issue. | Adjust fan speed settings in BIOS/UEFI or fan control software. Ensure PWM header is used. |
| Haruru nui | Dust accumulation, loose mounting, bearing issue. | Clean fan blades and grill. Ensure fan is securely mounted. If noise persists, consider replacement. Note: This is a high-performance fan and may generate significant noise at high RPMs. |
9. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | SST-FHS80X |
| Ahu | 80mm x 80mm x 38mm |
| Momo Kawe | Piripiri Piripiri Tuarua |
| Kaihono | 4-PWM PWM |
| Whakatauhia Voltage | 12V DC |
| Whakatauhia o naianei | 0.85A |
| Te Mana Whakatau | 10.2W |
| Tere | 2,000 ~ 10,000 RPM (PWM controlled) |
| Rererangi | 83.7 CFM (Max) |
| Pēhanga Pateko | 50.8 mmH2O (Mōrahi) |
| Taumata Haruru | 61.4 dBA (Mōrahi) |
| Rauemi | Kirihou |
10. Pūtāhui me te Tautoko
Silverstone Technology products come with a limited warranty. For detailed warranty information, please refer to the official Silverstone webpaetukutuku, whakapā atu ranei ki a raatau tautoko kaihoko.
- Tautoko Aipurangi: Haere ki te rangatira SilverStone Store for FAQs, driver downloads, and further product information.
- Whakapā Tautoko: For technical assistance or warranty claims, please contact SilverStone customer service.
Kia mōhio: Ka taea te whakarerekē i ngā whakatakotoranga me te āhua o te hua me te kore panui i mua.
