1. Kupu Whakataki
This manual provides essential information for the safe and effective use of your SOLTECH 12V 3A Power Supply Adapter. Please read these instructions carefully before installation and operation. Keep this manual for future reference.
2. Hua Neke Atuview
The SOLTECH 12V 3A Power Supply Adapter is designed to provide stable and reliable power for a variety of 12V DC devices. It features multiple safety protections and broad compatibility.
Āhuatanga matua:
- Tāuru: AC 100-240V, 50/60Hz
- Putanga: DC 12V, 3A (3000mA), 36W (Max)
- DC Connector Size: 5.5mm x 2.1mm
- Nga Parenga Haumaru: Neke atu i te-voltage, Over-current, Over-temperature, Over-load, Input, and Short-circuit protection.
- Tiwhikete: UL, FCC, CE, RoHS, REACH, SAA, RCM, PSE, GS, CB, KC, CCC.
- Rauemi: Constructed with fire-resistant PC materials (UL 94-V0 rated).
He aha kei roto i te Pouaka:
- 1 x SOLTECH 12V 3A Power Adapter
Figure 2.1: SOLTECH 12V 3A Power Supply Adapter.
3. Nga korero haumaru
Your safety is paramount. This power adapter is designed with multiple safeguards to ensure safe operation.
Nga Whakatupato Haumaru Nui:
- Do not expose the adapter to water, moisture, or high humidity.
- Kaua e wetewete, whakarereke ranei i te urutau.
- Ensure the adapter is used within its specified input and output voltagngā rohenga e/o nāianei.
- Avoid placing the adapter in poorly ventilated areas or near heat sources.
- Kaua e taea e nga tamariki.
Parenga-roto:
- Neke Atu i te Voltage Parenga: Ka aukati i te kino mai i te nui o te voltage.
- Parenga o naianei: Hei ārai i te nui rawa o te kukume o te iahiko.
- Parenga-nui-Pamahana: Protects against overheating.
- Parenga Uta Rawa: Prevents damage from exceeding maximum load capacity.
- Parenga Whakauru: Guards against input irregularities.
- Parenga-Poto: Automatically shuts off power in case of a short circuit.
Figure 3.1: The adapter includes multiple safety features to protect your devices.
Figure 3.2: The adapter is crafted to meet rigorous safety and quality benchmarks, including UL Listing.
4. Tatūnga
Follow these steps to properly set up your SOLTECH 12V 3A Power Supply Adapter:
- Manatokohia te Hototahitanga Pūrere: Ensure your device requires a 12V DC input and draws no more than 3A (3000mA) of current. Check your device's power input specifications.
- Check Connector Size: Confirm that your device's power input port is compatible with a 5.5mm outer diameter and 2.1mm inner diameter DC barrel connector.
- Observe DC Polarity: The adapter features a center-positive polarity. Ensure your device also requires center-positive polarity. Connecting with incorrect polarity can damage your device.
- Tūhono ki te Pūrere: Insert the DC barrel connector firmly into your device's power input port.
- Hono ki te Putanga Hiko: Plug the AC prongs of the adapter into a standard 100-240V AC wall outlet.
- Whakahiko: Your device should now receive power.
Figure 4.1: Confirming DC connector dimensions and polarity is crucial for proper setup.
5. Nga Tohutohu Whakahaere
The SOLTECH 12V 3A Power Supply Adapter operates on a plug-and-play principle. Once connected as described in the Setup section, it will continuously supply power to your device.
- Me whakarite kia mau nga hononga katoa i mua i te whakakaha.
- Kua hangaia te urutau mō te mahi tonu i roto i ngā rohe kua tohua.
- To disconnect power, unplug the adapter from the wall outlet first, then disconnect from the device.
6. Tiaki
Proper maintenance ensures the longevity and optimal performance of your power adapter.
- Te horoi: Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Rokiroki: Whakaorangia te whāurutau ki te waahi hauhautanga, maroke atu i te ra tika me te wera nui ina kore e whakamahia.
- Tirotiro: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use and replace the adapter.
7. Te Raru
If you encounter issues with your power adapter, refer to the following troubleshooting guide:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore te taputapu i te hiko | Kaore he hiko mai i te putanga Hononga wewete hē voltage/ nāianei Incorrect DC connector size/polarity Faulty adapter/device | Whakamatau te putanga me tetahi atu taputapu. Me whakarite kia mau nga hononga katoa. Verify device's power requirements match adapter's output. Confirm DC connector size and polarity. Try a different compatible adapter or test the device with its original adapter if available. |
| Ka wera te urutau | Te mahi noa (he mahana iti) Te taumahatanga He kino te hau | A slight warmth is normal. If excessively hot, disconnect immediately. Ensure device's current draw does not exceed 3A. Place adapter in a well-ventilated area. |
| Te mana oho | Hononga wewete Damaged cable/adapter | Tirohia me te haumaru i nga hononga katoa. Inspect cable and adapter for damage. Replace if damaged. |
8. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Tau tauira | PA12V3A1PA |
| Whakauru Voltage | AC 100-240V, 50/60Hz |
| Putanga Voltage | DC 12V |
| Putanga o naianei | 3A (3000mA) |
| Max Wattage | 36W |
| DC Connector Size | 5.5mm (Outer) x 2.1mm (Inner) |
| Te Roa Uera DC | 47.24 inches (approx. 1.2 meters) |
| Adapter Body Size | 1.26 x 1.77 x 3.82 inihi |
| Taumaha Tūemi | 2.89 hekere |
| Tiwhikete | UL, FCC, CE, RoHS, REACH, SAA, RCM, PSE, GS, CB, KC, CCC |
| Rauemi | Fire-resistant PC (UL 94-V0 rated) |
Figure 8.1: Detailed dimensions of the power adapter and cable.
9. Pūtāhui me te Tautoko
For warranty information or technical support, please refer to the product packaging or contact SOLTECH customer service directly. Contact details can typically be found on the manufacturer's official webpae, na roto ranei i to waahi hoko.
