WORKPRO 3.6V Cordless Grass and Shrub Shear User Manual

Kupu Whakataki

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Nga korero haumaru

Kia mau tonu ki nga whakaritenga haumaru taketake ina whakamahi taputapu hiko hei whakaiti i te tupono o te ahi, te ru hiko, me te whara whaiaro.

• Pānuihia te pukapuka: Pānuihia, kia mārama hoki ngā tohutohu katoa i mua i te whakahaere i te taputapu.
• Kia Maamaa te Rohe: Puritia ngā tamariki, ngā tāngata e tū tata ana, me ngā mōkai kia matara atu i te wāhi mahi.
• Ka mau i nga taputapu tiaki: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Pupuri Haumaru: Kia mau ki nga ringa e rua te taputapu i te wa e mahi ana.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Kei te utu: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Rokiroki: Whakaorangia te taputapu ki tetahi waahi maroke, haumaru, kia kore e taea e nga tamariki.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Ihirangi mokete

Manatokona kei te noho nga taonga katoa, kei te pai te ahua ina wetewetehia:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x Momo-C Uira Kaiha
• 1 x Pukapuka Kaiwhakamahi

Ka mutu te huaview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Waeine Matua: Ergonomic body with integrated motor and battery.
• Mata tarutaru: Designed for trimming grass edges, 75mm cutting width.
• Rakau Rakau: Designed for shaping shrubs and small branches, 120mm cutting length.
• Tauranga Whakatau Momo-C: Mo te whakahou i te pākahiko o roto.
• Pātene Maukati Haumaru: Ka aukati i te tiimata ohorere.
• ON / WAWHI Whakawhiti: Activates the motor when the safety lock is disengaged.
• Pātene Tuku Mata: Allows for quick and easy blade changes.
• TPR Anti-Slip Handle: He pai te pupuri, he haumaru hoki.

Tatūnga

Te Whakataki i te Pūhiko

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the Type-C charging port on the tool.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. The charging indicator light will illuminate (typically red) during charging.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Momotuhia te riihi ina oti te utu.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Tāuta/ Huri Matatahi

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Push the blade firmly into place until it clicks, indicating it is securely locked.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Nga Tohutohu Whakahaere

Always wear appropriate safety gear before operating the shear.

Te Timata me te Whakamutu i te Utauta

1. Ensure the desired blade is securely installed.
2. Kia mau te pupuri i te taputapu.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Te Whakamahi i te Mata Kutikuti Tarutaru

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Te tiaki

Ko te tiaki i nga wa katoa ka tino pai te mahi me te whakaroa i te oranga o to taputapu.

Te horoi

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Tiaki Matatahi

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• Ki te mangu ngā mata, ka taea te whakakoi e te tohunga, te whakakapi rānei.
• Store blades in a dry place to prevent corrosion.

Whakaahua: Kati-ake view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Rokiroki

• Whakaorangia te taputapu ki te waahi makariri, maroke, mawehe atu i te ra me te makuku.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Keep out of reach of children and unauthorized users.

Raparongoā

Whakatakotoranga

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Pūtāhui me te Tautoko

Mō ngā mōhiohio pūtāhui, tautoko hangarau rānei, whakapā atu ki te kaihanga, ki te wāhi hoko rānei. Puritia tō rīhiti hoko hei taunakitanga hoko.

Kaihanga: Hang Zhou Great Star Industrial Co.,LTD

For further assistance, visit the WORKPRO official webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko.