Kupu Whakataki
Thank you for choosing the CaDA C51043W Technics Buggy Building Blocks set. This manual provides detailed instructions for assembling, operating, and maintaining your remote control car. Please read this manual thoroughly before use to ensure proper function and safety.
Ka mutu te huaview
The CaDA C51043W is a 522-piece building block set designed to construct an all-terrain remote control buggy. It features a 2.4 GHz 4-channel remote control system, a suspension system, and a high-horsepower motor for dynamic performance. The assembled model is compatible with Lego Technic components.
Figure 1: Assembled CaDA C51043W Technics Buggy with its remote control.
Ihirangi mokete
Manatokohia kei roto i to kete nga waahanga katoa kua whakarārangihia i raro nei:
- 1 x Spare parts pack (522 building blocks)
- 1 x Mana Mamao
- 1 x Kaiwhakamahi pukapuka (tenei tuhinga)
- 1 x Battery pack (JV1010/7.4V Lithium battery)
- 1 x USB taura utu
- 1 x Servo motor
- 1 x L motor
Whakaatu 2: Neke Atuview of the main components included in the package, such as the remote control, motors, battery box, and USB cable.
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | C51043W |
| Te maha o nga wahi | 522 |
| Rauemi | Plastic + Hard parts |
| Auautanga Mana Mamao | 2.4 GHz |
| Tawhiti Mana Mamao | Tata ki te 25 mita |
| Tere Max | 4.1 km/h |
| Wā Whakamahi | meneti 30 |
| Waa Whakatau | 4-6 hours (First charge: 8 hours) |
| Pūhiko motokā | JV1010/7.4V Lithium battery |
| Pūhiko Mana Mamao | 2 x AAA JV8011/1.5V batteries (not included) |
| Taumaha Hua | 1280 karamu |
| Nga Ahu Kua Huihia (L x W x H) | Approx. 34.7 x 20.8 x 13.5 cm (13.75 x 8.2 x 5.3 inihi) |
Figure 3: Key dimensions of the assembled buggy.
Tatūnga
1. Huihuinga
Follow the included intuitive instruction manual for step-by-step assembly. The pieces are packed in numbered bags to simplify the building process. Ensure all connections are secure.
Whakaahua 4: Taha-mua view of the fully assembled buggy.
2. Tāuta Pūhiko me te Whakatau
- Pohiko Motuka: Install the JV1010/7.4V Lithium battery pack into the designated compartment in the buggy. Connect it securely.
- Kei te utu: Use the provided USB charging cable to charge the car's battery. The first charge should be approximately 8 hours. Subsequent charges will take 4-6 hours. Do not overcharge.
- Pūhiko Mana Mamao: Insert 2 x AAA JV8011/1.5V batteries (not included) into the remote control. Ensure correct polarity.
Nga Tohutohu Whakahaere
1. Te Hiko / Whakaweto
- Turn on the power switch on the buggy.
- Whakakāhia te pana hiko i runga i te mana mamao.
- The remote control and buggy should automatically pair. If not, refer to the troubleshooting section.
2. Mana Taketake
The 4-channel remote control allows for precise movement:
- Whakamua/Whakamuri: Use the left joystick to move the buggy forward or backward.
- Tahuri Mauī/Matau: Use the right joystick to steer the buggy left or right.
- Rama: The remote control may have a button to control the buggy's lights.
Figure 5: The buggy with its headlights on, ready for operation.
3. Tohutohu taraiwa
- Operate on flat, clear surfaces for optimal performance.
- Avoid water, sand, or excessively dusty environments to prevent damage to electronic components.
- Practice gentle steering and acceleration to master control.
Te tiaki
1. Te horoi
Wipe the buggy with a soft, dry cloth after each use to remove dust and debris. Do not use water or chemical cleaners.
2. Rokiroki
Store the buggy and remote control in a cool, dry place away from direct sunlight. Remove batteries from the remote control if storing for extended periods.
3. Tiaki Pūhiko
- Always fully charge the car battery before use.
- Kaua e waiho nga pākahiko e utu ana ma te kore e tiaki.
- If the battery is damaged or leaking, discontinue use immediately and dispose of it properly.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Buggy does not respond to remote control. | Low battery in buggy or remote control; Not paired; Out of range. | Charge buggy battery; Replace remote control batteries; Ensure buggy and remote are powered on and within 25m range. |
| Buggy moves slowly or inconsistently. | Low buggy battery; Obstruction in wheels/gears. | Charge buggy battery; Check for and remove any obstructions. |
| Kaore nga rama e mahi. | Loose connection; Damaged LED. | Check wiring connections for the lights; Contact support if damaged. |
Pūtāhui me te Tautoko
Each piece of this product undergoes quality inspection before shipment. If any part is missing or defective upon arrival, please circle the missing part in the instruction manual and send a picture to our customer support for a free replacement. Please retain your proof of purchase for warranty claims.
For further assistance or inquiries, please refer to the contact information provided on the product packaging or the official CaDA webpae.
