Polibi Twin Rahi Rakau Roera Roopu Roopu me te Tepu me te Puka Tohu Tohutohu

1. Kupu Whakataki

This manual provides essential instructions for the assembly, operation, and maintenance of your Polibi Twin Size Wooden Loft Bed. This multi-functional loft bed is designed to optimize space, offering a comfortable sleeping area, a dedicated study or work desk, a 2-door wardrobe, and three integrated drawers. Please read this manual thoroughly before beginning assembly or use to ensure safe and correct installation and operation.

2. Nga korero haumaru

Ko to haumaru te mea nui. Kia mau ki nga aratohu e whai ake nei:

• Always ensure all hardware is securely tightened before and after assembly. Periodically check and re-tighten connections.
• The bed is equipped with comprehensive guardrails to prevent falls. Do not remove or modify these guardrails.
• The maximum weight capacity for the bed is 400 lbs. Do not exceed this limit.
• Do not allow children to play unsupervised on or around the loft bed.
• Ensure the bed is placed on a level surface to prevent instability.
• Mattress not included. Use a mattress that fits the bed dimensions and does not exceed the height of the guardrails.

3. Ihirangi mokete

I mua i te huihuinga, tirohia kei te noho nga waahanga katoa kei raro nei me te kore e pakaru. Mena kei te ngaro, kua pakaru ranei etahi waahanga, tena koa whakapiri atu ki te tautoko a nga kaihoko.

• Ngā Wāhanga Anga Moenga (Papa Matua, Papa Waewae, Rerewē Taha)
• arawhata
• Desk Unit (Desk surface, support panels, drawer components)
• Wardrobe Unit (Side panels, back panel, doors, hanging rod, shelves)
• Nga Riu Moenga
• Kete Taputapu (Ngā tīwiri, ngā pūtu, ngā nati, te kī Allen, me ētahi atu)
• Pukapuka Tohutohu

4. Nga Tohutohu Huihuinga

Assembly requires two adults. A power drill with an appropriate bit for Allen wrench screws is recommended to expedite the process. Ensure you have ampte wāhi hei mahi.

I mua i to tiimata

• Clear a large, open area for assembly.
• Unpack all boxes and lay out components. Organize parts by type and label.
• Review the entire instruction manual and diagrams before starting.

Hipanga-i-Step Runanga

1. Huihuia te Anga Moenga Matua: Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are snug but do not overtighten until the frame is fully aligned.
2. Tāpirihia te Arawhata: Securely fasten the ladder to the designated side of the bed frame. Verify it is stable and can support weight.
3. Assemble and Integrate the Desk Unit: Construct the desk frame and drawers according to the diagrams. Attach the desk unit to the bed frame. Ensure drawers slide smoothly.
4. Assemble and Integrate the Wardrobe Unit: Assemble the wardrobe panels, install the hanging rod and shelves. Attach the wardrobe unit to the bed frame. Ensure doors open and close properly.
5. Tāutahia nga Riu Moenga: Place the wooden slats across the bed frame, ensuring even spacing and secure attachment. These slats provide mattress support and ventilation.
6. Taki Whakamutunga: Once assembly is complete, re-check all bolts and screws to ensure they are fully tightened. Confirm the bed is stable and does not wobble.

Whakaahua 1: Te katoa view of the Polibi Twin Size Wooden Loft Bed with integrated desk, drawers, and wardrobe.

Image 2: Detailed dimensions of the loft bed, desk, and wardrobe components.

Atahanga 3: Whakatata view of the integrated desk area with shelves and three drawers.

Whakaahua 4: Roto view of the 2-door wardrobe, showing the hanging rod and shelves.

Whakaahua 5: Taipitopito view of the three pull-out drawers integrated into the desk unit.

5. Nga Tohutohu Whakahaere

• Te Whakamahi i te Moenga: Access the bed via the ladder. Ensure the mattress is properly seated on the slats.
• Te whakamahi i te Papamahi: The integrated desk provides a surface for study or work. The shelves above the desk can be used for books or small items.
• Te whakamahi i nga Kaituku: The three drawers under the desk offer storage for personal items, stationery, or clothing. Pull gently to open and push to close.
• Using the Wardrobe: The 2-door wardrobe includes a hanging rod for clothes and shelves for folded items.

6. Tiaki me te Tiaki

• Te horoi: Wipe wooden surfaces with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
• Takitaki Pūmārō: Tirohia ngā pūtu, ngā tīwiri, me ngā hononga katoa i ia wā. Whakakīia anō ngā taputapu ngoikore kia mau ai te pumau me te haumaru.
• Whakahau: Ensure adequate air circulation around the mattress by regularly checking the bed slats.

7. Te Raru

• E wiri ana te moenga: This is often due to loose connections. Re-check and tighten all assembly hardware, especially the main frame bolts. Ensure the bed is on a flat, even surface.
• Drawers do not slide smoothly or are misaligned: Verify that the drawer slides are correctly installed and aligned. Ensure the drawer components were assembled squarely. Minor adjustments may be needed.
• Wardrobe doors do not close properly: Check the hinges and magnetic catches for proper alignment and installation.

8. Whakatakotoranga

9. Tautoko Kiritaki

If you have any questions regarding the assembly, operation, or maintenance of your Polibi Loft Bed, please do not hesitate to contact our customer service representatives. For assistance, refer to the contact information provided at the point of purchase or on the Polibi official webpae.