WORKPRO Storage Cabinet Instruction Manual

Kupu Whakataki

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your WORKPRO Metal Storage Cabinet. Designed for durability and versatility, this tall locking steel cabinet is suitable for organizing tools, office supplies, home items, and various shop essentials. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

Figure 1: WORKPRO Storage Cabinet with doors open, displaying its spacious interior and included keys.

Nga Korero Haumaru Nui

He mea nui te piri ki ēnei aratohu haumaru hei ārai i ngā whara me ngā kino ki te hua.

• Always assemble this product on a stable, level surface.
• Use appropriate safety gear when lifting and moving the cabinet.
• Puritia te kāpata kia matara atu i ngā pūtake wera.
• Do not overload the shelves. Each shelf can hold up to 180 lbs (evenly distributed). The total load capacity is 900 lbs.
• Always use both hands when opening and closing the cabinet doors to prevent pinching.
• Kia maukati te rūnanga karekau e whakamahia kia kore ai e uru mai.
• Always follow the manufacturer's instructions for proper use and maintenance.

Rarangi Wahi

I mua i te tīmatanga o te huihuinga, kia tino mohio kei te wātea katoa ngā wāhanga, ā, kāore he pakaru. Tirohia te hoahoa i raro nei hei tautuhi.

Whakaahua 2: Pahū view of the WORKPRO Storage Cabinet components.

Tatūnga me te Runanga

Assembly requires at least two people due to the weight and size of the components. An electric drill or PH2 Phillips screwdriver is recommended.

1. Whakapaia te turanga: Lay the bottom panel on a flat, protected surface. Attach the corner brackets and adjustable feet to the bottom panel using the provided screws. Ensure the feet are tightened clockwise to elevate and counter-clockwise to lower for leveling.
2. Assemble Back and Side Panels: Align and attach the two back panels together. Then, attach the left and right side panels to the assembled back panels at right angles, securing them with screws at the indicated locations.
3. Attach Top Bracket: Secure the top bracket to the side panels using screws. This provides structural integrity to the top frame.
4. Āpiti Paepae Runga: Carefully place the top panel onto the assembled frame and secure it with screws.
5. Tāuta Whata: Insert the metal clips into the perforated slots on the side panels at your desired height for each shelf. Place the shelves onto these clips. You can adjust the shelf height as needed. For added stability, plastic clips can be inserted at the corners of the shelves to lock them in place.
6. Whakapiria nga Kuaha: Install the bottom hinge pin and washer on each side of the bottom bracket. Lower the left door onto the bottom left hinge pin, then swing the left door into the top bracket while pulling down on the latch. Align the latch with the hole in the top bracket and release when the latch is in position. Repeat for the right door.

Assembly Video Guides:

Nga Tohutohu Whakahaere

Te Whakatikatika Whata

The cabinet features adjustable shelves to accommodate items of various sizes. To adjust a shelf:

1. Whakawāteahia te whata e hiahia ana koe ki te nuku.
2. Remove the shelf by lifting it off its support clips.
3. Relocate the metal support clips to the desired height in the perforated slots on the side panels.
4. Place the shelf back onto the clips, ensuring it is level and secure. For enhanced stability, insert the provided plastic locking clips at the corners of the shelf.

Figure 3: Adjustable shelves allow for customized storage configurations. Each shelf supports up to 180 lbs.

Tikanga Maukati

The cabinet is equipped with an enhanced locking system for security. Four keys are provided.

• To lock: Close both doors firmly. Insert a key into the lock cylinder and turn clockwise until the mechanism engages.
• To unlock: Insert a key into the lock cylinder and turn counter-clockwise. The doors should then open freely.

Figure 4: The enhanced locking system ensures the security of your stored items.

Te tiaki

Regular maintenance will prolong the life of your WORKPRO Storage Cabinet.

• Te horoi: Wipe down the cabinet surfaces with a soft, damp kakahu me te horoi ngawari. A ape i nga kai horoi me nga whakarewa ka taea te pakaru i te mutunga.
• Tirotiro: Tirohia ngā tīwiri me ngā hononga katoa i ia wā, i ia wā, kia tino piri. Whakapiria anō mēnā e tika ana.
• Whakataumata: Re-adjust the leveling feet if the cabinet becomes unstable or uneven over time.
• Ārai Waikura: The cabinet is made of SPCC cold rolled steel with a powder coating for rust resistance. However, avoid prolonged exposure to excessive moisture or harsh chemicals to maintain its integrity.

Raparongoā

Whakatakotoranga Hua

Figure 5: The cabinet's construction features durable SPCC cold rolled steel with a protective powder coating.

Pūtāhui me te Tautoko

For any parts that are damaged or missing, or for further assistance, please feel free to contact the WORKPRO service team. They are committed to resolving your problem within 24 hours.

He Pukapuka Kaiwhakamahi whai mana (PDF) e waatea ana hei tango: Tikiake Manual Kaiwhakamahi