Kaiwhakatikatika X2

Edifier X2 True Wireless Bluetooth Headphones Earbuds User Manual

Model: X2 | Brand: Edifier

Kupu Whakataki

Welcome to the user manual for your Edifier X2 True Wireless Bluetooth Headphones Earbuds. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your device to ensure optimal performance and a satisfying audio experience. Please read this manual thoroughly before using your earbuds.

Edifier X2 True Wireless Bluetooth Headphones Earbuds and Charging Case

Image: Edifier X2 earbuds and their charging case.

Tatūnga

He aha kei roto i te Pouaka

  • Edifier X2 True Wireless Earbuds
  • Puhi utu
  • Uera Whakatau
  • Pukapuka Kaiwhakamahi

Te Whakataki i nga Pukarongo me te Puhi

Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case. Connect the charging case to a power source using the provided USB cable. The indicator light on the case will show charging status. A full charge for the case typically takes approximately 2 hours. The earbuds provide up to 7 hours of playback on a single charge, with the charging case extending total playtime to 28 hours.

Graphic showing Edifier X2 earbuds charging and battery life

Image: Visual representation of charging times and total playback duration.

Whakahoahoa ki te Pūrere

  1. Open the charging case and remove both earbuds. The earbuds will automatically enter pairing mode, indicated by rapidly blinking red and blue LEDs.
  2. I runga i to taputapu Bluetooth-whakahohea (waea atamai, papa, rorohiko), haere ki nga tautuhinga Nihokikorangi.
  3. Rapua available devices and select "EDIFIER X2" from the list to connect.
  4. Once connected, the earbud LEDs will turn off, and you will hear an audible confirmation.

For subsequent use, the earbuds will automatically reconnect to the last paired device when removed from the case, provided Bluetooth is enabled on the device.

Screenshot of a phone's Bluetooth settings showing Edifier X2 ready to pair

Whakaahua: Example of pairing the Edifier X2 earbuds with a mobile device.

Nga Tohutohu Whakahaere

E mau ana i nga Paorooro

Gently insert the earbuds into your ears, ensuring a comfortable and secure fit. The ergonomic design is intended for long-lasting comfort and stability during various activities.

Mana Pa

The Edifier X2 earbuds feature intuitive touch controls on each earbud. Refer to the table below for common functions:

MahiWhakahaere
Tatari/Whakatangi WaiataDouble-click the left or right earbud
Accept/End a CallDouble-click the left or right earbud
Riro PanukuTriple-click the right earbud
Aratau Keemu Ki/WetoTriple-click the left earbud
Whakakahoretia he WaeaPress and hold the left or right earbud for 3 seconds
Whakahohe Kaiāwhina ReoTriple-click the left or right earbud
Diagram illustrating touch control functions on Edifier X2 earbuds

Image: Detailed diagram of touch control gestures and their corresponding functions.

Nga Mahi Waea

The Edifier X2 earbuds are equipped with dual microphones and advanced call noise reduction technology to ensure clear voice quality during calls, even in noisy environments. Use the touch controls to manage your calls.

Woman wearing Edifier X2 earbuds, with sound wave graphics indicating clear calls

Image: Illustrates the clear call quality provided by the earbuds' noise reduction feature.

Kounga oro

Experience rich HiFi stereo sound delivered by the impressive 13mm large dynamic drivers. These drivers ensure a wide soundstage and balanced audio, allowing for an immersive listening experience.

Diagram showing the internal 13mm large dynamic driver of the Edifier X2 earbud

Image: Cutaway diagram highlighting the 13mm large dynamic driver and Bluetooth 5.1 chip.

Te tiaki

Te horoi

To maintain optimal performance and hygiene, regularly clean your earbuds and charging case. Use a soft, dry, lint-free cloth to wipe down the surfaces. Avoid using abrasive materials or harsh chemicals. For the earbud grilles, gently remove any debris with a small, soft brush.

Ātete wai

The Edifier X2 earbuds feature an IPX54 water-resistant rating. This means they are protected against dust ingress and splashing water from any direction. They are suitable for use during workouts, running, or in light rain. However, they are not designed for submersion in water or exposure to pressurized water jets. Ensure the earbuds are dry before placing them back in the charging case.

Edifier X2 earbuds with water splashes, illustrating IPX54 water resistance

Image: Earbuds shown with water droplets, emphasizing their IPX54 water-resistant capabilities.

Raparongoā

  • Karekau e honoa nga taringa: Ensure both earbuds are out of the case and fully charged. Turn off and on your device's Bluetooth. If issues persist, try resetting the earbuds (refer to manufacturer's webpae mō ngā tohutohu tautuhi anō motuhake mēnā kāore i roto i te pukapuka ā-ringa).
  • Karekau he oro mai i tetahi pukoro: Place both earbuds back into the charging case, close the lid, wait a few seconds, then take them out again. Check your device's audio balance settings.
  • Nga take utu: Verify the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
  • He kino te kounga waea: Ensure the microphones are not obstructed. Move closer to your connected device to improve signal strength.
  • Hononga mokowhiti: Reduce the distance between the earbuds and your device. Avoid environments with significant wireless interference.

Whakatakotoranga

ĀhuahiraTaipitopito
Ingoa TauiraKaiwhakatikatika X2
Hangarau HonongaAhokore (Nihokikorangi)
Putanga Nihokikorangi5.1
Awhe Nihokikorangi10 Mita
Momo Atekōkiri OrorongoAtekōkiri Hihiko
Rahi Atekōkiri Ororongo13 Mirimita
Awhe Auautanga20Hz - 20KHz
Te aukati32 Aue
Te ora o te Pūhiko (Ngā taringa)Tae atu ki te 7 haora
Wā Takaro Tapeke (me te Puhi)Tae atu ki te 28 haora
Waa WhakatauApprox. 2 Hours (Case)
Taumata Atete WaiIPX54
Momo ManaTouch-based Controller
Taumaha Tūemi1.76 hekere (50 Karamu)
Pūrere HototahiAndroid, Cell Phone, Computer, Laptop

Pūtāhui me te Tautoko

Edifier products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Edifier website. For technical support, frequently asked questions, or further assistance, please visit the Edifier support page or contact their customer service directly.

Kaiwhakatikatika Whaimana Webpae: www.edifier.com