Kupu Whakataki
This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.
The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.
Ihirangi mokete
I mua i te tāutanga, me whakarite kei te wātea ngā wāhanga katoa:
- 1 x Flexson Wall Mount
- Pukapuka Tohutohu
- Ngā whakapiri (ngā tīwiri, ngā mono pakitara)
- Corner Adapter (optional use)
Whakaahua 1: Pahū view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.
Nga korero haumaru
- Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
- Whakamahia nga taputapu tika me nga taputapu haumaru i te wa e whakauru ana.
- Mena kāore koe i te tino mōhio mō te tāutanga, whakapā atu ki tētahi tohunga ngaio.
- Tiakina nga waahanga iti mai i nga tamariki.
Tatūnga me te Tāuta
Follow these steps for proper installation of your Flexson Wall Mount:
- Kōwhiri Tauwāhi: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Tohua nga Tohu Keri: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
- Rua rua: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
- Kōkuhu Mono Taiepa: Insert the appropriate wall plugs into the drilled holes.
- Tāpirihia te Taupoki Pakitara: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
- Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
- Whakamau Kaikōrero: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
- Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
- Whakaritea te Turanga: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Whakaahua 2: Mua view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.
Whakaahua 3: Te taha view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.
Whakaahua 4: Koki view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.
Nga Tohutohu Whakahaere
Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.
- Konga: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
- Hurihuri: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
- Whakapuru Hurihuri: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Whakaahua 5: Te taha kati view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.
Te tiaki
The Flexson Wall Mount requires minimal maintenance.
- Te horoi: Horoia te papa ki te kakahu ngohengohe, maroke hei tango i te puehu. Āta karohia ngā kai horoi me ngā whakarewa.
- Takiwā: Periodically check all screws and fixings to ensure they remain tight and secure.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Mount feels loose on wall | Screws or wall plugs not properly secured. | Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type. |
| Speaker not stable in cradle | Cradle components not fully assembled or tightened. | Check all screws securing the speaker cradle. Ensure the speaker is correctly seated. |
| He uaua ki te whakarerekē i te honga/te hurihuri | Adjustment mechanism is too tight. | Do not force. Check the manual for specific adjustment points and loosen slightly if necessary. |
Whakatakotoranga
| Tau tauira | FLXE100WM1021 |
| Waitohu | Flexson |
| Kaikorero Hototahi | SONOS ERA100 |
| Rauemi | Korotahi Steel |
| Tae | Pango |
| Momo Whakaoti | Kua pania te paura |
| Hunga Hua | 6.93 x 4.72 x 6.02 inihi (17.6 x 12 x 15.3 cm) |
| Taumaha Tūemi | 14.4 hekere (0.41 kg) |
| Raukaha Uta | 14.2 Pauna (6.44 kg) |
| Whakaritea Tilt | Up to 20 degrees downwards |
| Whakatikatikanga Hurihuri | 80 degrees (40 degrees left, 40 degrees right) |
Pūtāhui me te Tautoko
For warranty information and technical support, please refer to the official Flexson webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to riiki hoko hei tohu mo te hoko.
Kaihanga: Flexson
Webpae: Visit the Flexson Store on Amazon (mo nga korero tohu whanui)
