AQQA Aquarium Light Model GCA-AQ052 Instruction Manual

1. Hua Neke Atuview

The AQQA Aquarium Light Model GCA-AQ052 is a full-spectrum LED lighting solution designed for aquariums ranging from 17 to 24 inches. It features 14 adjustable colors, 5 brightness levels, and an integrated timer for automated operation. The light is constructed with a durable aluminum alloy and boasts an IP67 waterproof rating, ensuring longevity and safety in aquatic environments.

Image 1.1: The AQQA Aquarium Light providing illumination to a planted aquarium.

2. Ihirangi mokete

Tena koa tirohia kei roto nga waahanga katoa i roto i te kete:

• AQQA Aquarium Light Unit (Model GCA-AQ052)
• Extendable Mounting Brackets (2x)
• Pūurutau Mana me te Kaiwhakahaere
• Pukapuka Tohutohu (tenei tuhinga)

3. Tohutohu Tatūnga

3.1 Te Whakaeke i te Marama

1. Kia ata wetewetehia nga waahanga katoa mai i te pouaka.
2. Attach the extendable mounting brackets to each end of the light unit. Ensure they are securely fastened.
3. Place the light unit on top of your aquarium. Adjust the extendable brackets to fit the width of your tank (suitable for 17-24 inch tanks).
4. Ensure the light is stable and centered over the aquarium for even illumination.

Image 3.1: The extendable brackets allow for flexible installation on various tank sizes.

3.2 Hononga Hiko

1. Connect the power adapter cable to the light unit.
2. Monohia te urutau hiko ki te putanga hiko paerewa.
3. Ensure the power cord is routed safely and away from water to prevent accidental splashes.

4. Nga Tohutohu Whakahaere

The AQQA Aquarium Light is controlled via an inline remote with several buttons for various functions.

Image 4.1: The inline remote control for managing light settings.

4.1 Hiko / Whakaweto

• Pehia te Pātene hiko () hei whakakā, hei whakaweto rānei i te rama.

4.2 Whakaritea Tae

• Pehia te Color Change button () to cycle through 14 different color modes.
• Hei whakahohe i te Auto Color Change Mode, pehia me te pupuri i te Color Change button for approximately 3 seconds. The light will automatically transition between colors.

4.3 Whakaritenga Tirohanga

• Whakamahia te Te Kanapa Ake (+) a Te Kanapa i raro (-) buttons to adjust the light intensity.
• There are 5 adjustable brightness levels, ranging from 10% to 100%.

Image 4.2: Visual representation of the 5-level brightness adjustment.

4.4 Mahi Matama

The built-in timer allows for automated lighting cycles.

• Pehia te Pātene matawā () to select a duration: 3 hours (3H), 6 hours (6H), ranei 12 hours (12H).
• Once a timer is set, the light will automatically turn off after the selected duration and will turn on at the same time the next day, repeating the cycle.
• Mo te example, if you activate the 12H timer at 8:00 AM, the light will turn off at 8:00 PM and automatically turn on again at 8:00 AM the following day.

Image 4.3: Timer settings for 3, 6, or 12 hours of operation.

5. Tiaki

5.1 Te horoi

• Before cleaning, always unplug the light from the power outlet.
• Wipe the light unit with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or waterproof sealing.
• Ensure the light is completely dry before reconnecting it to power.

5.2 Waterproofing Information

• The AQQA Aquarium Light has an IP67 waterproof rating, meaning it is protected against dust and temporary immersion in water (up to 1 meter for 30 minutes).
• Hiranga: This light is designed for placement over the aquarium and is kaore intended for submersible use. Do not immerse the light unit directly into the water.

6. Te Raru

If you encounter issues with your AQQA Aquarium Light, please refer to the following common solutions:

• Kare te Maama e Ka ana:
  • Tirohia mehemea kua mau te urutau hiko ki te wae rama me te putanga hiko.
  • Manatokohia kei te mahi te putanga hiko ma te hono ki tetahi atu taputapu.
  • Ensure the power button on the inline remote is pressed.
• Colors or Brightness Not Changing:
  • Ensure the remote control buttons are being pressed firmly.
  • If the light is stuck on a specific color or brightness, try unplugging the unit for 30 seconds and then plugging it back in to reset.
• Taumahi Matawā Kāore i te Mahi:
  • Confirm that a timer duration (3H, 6H, or 12H) has been selected by pressing the timer button. The corresponding indicator light on the remote should be illuminated.
  • The timer cycle begins from the moment it is set. If you unplug the light, the timer will reset.
• Light Flickering or Malfunctioning:
  • Momotuhia te hiko i tēnei wā tonu.
  • Inspect the power cord and light unit for any visible damage.
  • Mena kei te haere tonu nga raru, whakapā atu ki te tautoko a te kaihoko.

7. Whakatakotoranga

Image 7.1: Detailed specifications for different AQQA aquarium light models, including the GCA-AQ052.

8. Nga Korero Whakaputanga

The AQQA Aquarium Light Model GCA-AQ052 comes with a manufacturer warranty for 1 tau mai i te ra o te hoko. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, unauthorized repair, or failure to follow the instructions in this manual.

9. Tautoko Kiritaki

For further assistance, technical support, or warranty inquiries, please contact AQQA customer service through the retailer where the product was purchased or visit the official AQQA brand store online.

We are committed to providing quality products and support to our customers.