COUGAR Duoface Pro RGB Mid Tower Case Manual

Kupu Whakataki

Welcome to the COUGAR Duoface Pro RGB Mid Tower Case instruction manual. This document provides essential information for setting up, operating, maintaining, and troubleshooting your new PC case. Please read through these instructions carefully to ensure proper installation and optimal performance of your system.

Ka mutu te huaview

The COUGAR Duoface Pro RGB is a versatile mid-tower case designed for PC enthusiasts. It offers two distinct front panels: a tempered glass panel for showcasing your build and an airflow-optimized mesh panel. The case supports large components, including graphics cards up to 390mm in length and E-ATX motherboards. It features incredible RGB lighting and an innovative quick-slide dust filter for easy maintenance.

The COUGAR Duoface Pro RGB Mid Tower Case in white, showcasing its tempered glass front panel and internal RGB fans.

Whakatakotoranga

Tatūnga

Te Whakakore me te Tirotiro Tuatahi

Carefully remove the case from its packaging. The case comes with the tempered glass front panel pre-installed. An additional mesh panel is included in a separate box.

The COUGAR Duoface Pro RGB case packaged in its standard brown carton box, with the tempered glass panel pre-installed and an additional mesh panel box.

Accessing the Interior

To open the tempered glass side panel, locate and unscrew the thumb screw at the rear of the panel. Once the screw is removed, gently pull the panel from the top to disengage it from the magnetic mounts, then lift it off.

A hand unscrewing the thumb screw securing the tempered glass side panel of the COUGAR Duoface Pro RGB case.

The solid rear side panel is secured by two regular screws. Remove these screws and slide the panel backward to detach it.

Tāutanga Papa Matua

The Duoface Pro RGB supports motherboards from Mini-ITX up to E-ATX. For E-ATX motherboards, you may need to remove the cable management bar located on the right-hand side of the motherboard tray to provide sufficient space. This bar is typically secured by a single screw.

He roto view of the COUGAR Duoface Pro RGB case highlighting E-ATX motherboard compatibility and 390mm graphics card length support.

CPU Cooler and GPU Installation

The case accommodates CPU air coolers up to 190mm in height. For graphics cards, there is ample space for cards up to 390mm in length. The case also features triple vertical slots, allowing for vertical GPU mounting with a separate PCIe riser cable (not included).

He tata view of the adjustable GPU support bracket inside the COUGAR Duoface Pro RGB case, designed to prevent sag for longer graphics cards.

Tautoko Pā me te Pāreti

The case supports up to nine fans. The front and top panels can accommodate up to three 120mm fans or two 140mm fans. The rear supports one 120mm or 140mm fan. For liquid cooling, the front and top can house radiators up to 360mm or 280mm, while the rear supports a 120mm or 140mm radiator.

He pahū view of the COUGAR Duoface Pro RGB case, showing the removable top panel, front fan bracket, and various internal components.

Whakauru Rokiroki

The case includes two SSD brackets behind the motherboard tray and a removable drive cage in front of the PSU shroud for two 3.5-inch HDDs. This cage can be removed by unscrewing a single screw and sliding it out.

Whakahaere Taura

The Duoface Pro RGB offers approximately 2.3-2.4mm of space behind the motherboard tray for cable management. It features pre-installed Velcro straps and guiding rails to help keep cables tidy. Rubber grommets are strategically placed around the motherboard tray to facilitate clean cable routing.

Nga Tohutohu Whakahaere

Interchangeable Front Panels

The case comes with two distinct front panels: a tempered glass panel for aesthetics and a mesh panel for optimized airflow. To swap panels, gently pull the current panel from the bottom to disengage the clips, then lift it off. Align the new panel with the clips and push firmly until it snaps into place.

The COUGAR Duoface Pro RGB case with its tempered glass front panel, showcasing the internal RGB fans.

The COUGAR Duoface Pro RGB case with its mesh front panel, providing optimal airflow for the internal RGB fans.

Mana Rama RGB

The case features incredible RGB lighting from its pre-installed fans. An RGB button on the I/O panel allows for direct control of lighting effects. For advanced synchronization, connect the included SATA-powered ARGB controller to your motherboard's ARGB header and use your motherboard's software.

Te tiaki

Puehu Tātari Whakapai

The Duoface Pro RGB includes an innovative quick-slide dust filter at the bottom of the case. This filter can be easily removed by sliding it out for cleaning without disassembling any other components. Regularly clean the dust filters to maintain optimal airflow and prevent dust buildup inside your system.

The innovative quick-slide dust filter being removed from the bottom of the COUGAR Duoface Pro RGB case for easy cleaning.

Raparongoā

Haruru Fan

The pre-installed fans may exhibit a slight whistling noise at lower speeds. While generally acceptable for included fans, if quiet operation is a priority, consider replacing them with premium aftermarket fans.

Tuhinga o mua Paewhiri

When re-installing the front panel, ensure it is aligned correctly with the clips before pushing it into place. Improper alignment may require more force and could potentially damage the clips or the panel.

Tangohanga Paewhiri Taha

When removing the tempered glass side panel, after unscrewing the rear thumb screw and disengaging the top magnets, support the panel from the bottom to prevent it from falling. The bottom hook is short, and the panel can easily detach if not supported.

Pūtāhui me te Tautoko

For detailed warranty information, technical support, and service inquiries, please visit the official COUGAR webpae. Puritia to tohu hoko mo etahi kereme whakamana.

Ka waatea pea etahi atu mahere whakamarumaru mo te hoko motuhake hei whakaroa atu i te kapinga ki tua atu i te whakamana a te kaiwhakanao.