BLUETTI AC180 Solar Generator Manual Kaiwhakamahi

Kupu Whakataki

The BLUETTI AC180 Solar Generator is a versatile portable power station designed to provide reliable power for various applications, including outdoor activities, camping, and emergency backup during power outages. This manual provides essential information for the safe and efficient operation of your AC180 unit and its accompanying 100W solar panel.

Figure 1: BLUETTI AC180 Portable Power Station with 100W Solar Panel.

He aha kei roto i te Pouaka

Upon unboxing your BLUETTI AC180 Solar Generator kit, please verify that all the following components are included:

• BLUETTI AC180 Teihana hiko kawe
• 100W Solar Panel (shipped separately)
• Taura Whakamaa AC
• Uraera Whakatauira Solar
• Tauera Whakatau Motuka
• Pukapuka Kaiwhakamahi

Tatūnga

Before first use, ensure your AC180 unit is fully charged. Refer to the 'Charging Options' section for detailed instructions.

Hia Tuatahi

• Press and hold the main power button for a few seconds until the display screen illuminates.
• The display will show the current battery level, input/output wattage, me te whakatau tata mō te wā whakahaere e toe ana.

Figure 2: Intuitive display for real-time monitoring of input, output, and battery status.

Nga Tohutohu Whakahaere

Hononga Pūrere

The AC180 offers multiple output ports to power various devices:

• Putanga AC: Press the 'AC' button on the control panel to activate the 4 AC outlets. These provide 1800W continuous output (2700W surge).
• Tauranga USB: The unit features USB-C and USB-A ports. Press the 'DC' button to activate these outputs for charging phones, tablets, and other USB-powered devices.
• Huinga DC: The 12V/10A DC output can power compatible 12V devices. Activate by pressing the 'DC' button.

Figure 3: The AC180 features 11 outlets for diverse power needs.

BLUETTI App Control

Download the BLUETTI app to monitor and control your AC180 remotely via Bluetooth. The app provides real-time data on power consumption, battery status, and allows you to adjust settings.

Figure 4: Real-time control and monitoring via the BLUETTI app.

Kōwhiringa Whakatau

The BLUETTI AC180 offers multiple ways to recharge its internal battery:

• Puta Taiepa AC: Utilize the included AC charging cable for rapid recharging. The unit supports 1440W Flash Charge, allowing it to reach 80% in approximately 45 minutes and full charge in 1 hour.
• Paewhiri Solar: Connect the 100W solar panel using the provided solar charging cable. The AC180 can be fully replenished in 11.5-23 hours depending on sunlight conditions.
• Te Whakataki Motuka: Use the car charging cable to recharge the unit from your vehicle's 12V port.

Figure 5: Multiple charging options including AC, solar, and car charging.

Te Whakamahinga Paewhiri Solar

The included 100W monocrystalline solar panel offers a cell efficiency of 23.4%. For optimal charging, position the solar panel directly towards the sun and ensure it is not shaded.

Figure 6: The 100W solar panel for efficient solar recharging.

BLUETTI Charger 1 (Optional Accessory)

For even faster on-the-go charging, the BLUETTI Charger 1 (500W Max input for AC180) can be used. This accessory provides 5X faster charging speed compared to a standard 12V/8A car cigarette lighter charger.

Video 1: Demonstrates the use of BLUETTI Charger 1 for rapid in-car charging of the AC180.

Nga korero haumaru

The BLUETTI AC180 is built with multiple safety features to ensure reliable operation:

• Pūhiko LiFePO4: Utilizes a Flame-Free LFP Battery technology, which undergoes 10,000+ tests to ensure zero fire or explosion risk.
• Pūnaha Whakahaere Pūhiko Atamai (BMS): The integrated BMS protects each cell from overcharge, overcurrent, overheating, and other potential issues.
• Multi-Protection Shell: Ko te pakari casing is designed to be shockproof, short-circuit resistant, and leak-resistant.

Figure 7: Internal safety features including LiFePO4 battery and BMS.

Te tiaki

To ensure the longevity and optimal performance of your BLUETTI AC180, follow these maintenance guidelines:

• Whakaorangia te waeine ki te waahi makariri, maroke atu i te ra tika me te wera nui.
• Charge the unit to at least 80% every 3-6 months if not in regular use to preserve battery health.
• Keep the ventilation ports clear of dust and debris to prevent overheating.
• Horoia te waho ki te kakahu ngohengohe, maroke. A ape i te whakamahi i nga matū kino, i nga taonga abrasive ranei.

Raparongoā

If you encounter issues with your AC180, try the following common troubleshooting steps:

• Karekau te waeine e whakakā ana: Me whakarite kua utaina te pākahiko. Ki te kore, hono atu ki te puna hiko.
• No output from AC/DC/USB ports: Verify that the respective AC or DC output buttons are pressed and their indicators are lit. Check if the device you are trying to power is within the unit's wattage rohe.
• Parenga taumaha: If an overload occurs, the unit may shut down. Disconnect the overloaded device, restart the AC180, and try again with a lower-power device.
• Whakaatu take: If the display shows incorrect battery percentage or input/output, ensure the unit is fully charged until the input wattage drops to zero, indicating a complete charge cycle.

Whakatakotoranga

Pūtāhui me te Tautoko

BLUETTI offers a 5-year coverage on the AC180 Solar Generator. For any questions, technical assistance, or warranty claims, please contact BLUETTI customer support. Refer to the official BLUETTI webpae, to tuhinga hoko ranei mo nga taipitopito whakapā motuhake.

Figure 8: The AC180 comes with a 5-year warranty for peace of mind.