1. Kupu Whakataki
Thank you for choosing the V-TAC PRO VT-211 LED E27 Bulb. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.
Figure 1: V-TAC PRO VT-211 LED E27 Bulb. This image displays the main product, a V-TAC PRO VT-211 LED bulb with an E27 screw base.
2. Nga Tohutohu Haumaru
Hei whakarite i te mahi haumaru me te aukati i te kino, me whai i nga whakatupato haumaru e whai ake nei:
- Always switch off the power supply before installing, replacing, or cleaning the bulb.
- Ensure the bulb is securely screwed into a compatible E27 lamp kaipupuri.
- Do not use the bulb in enclosed fixtures without adequate ventilation, as this may reduce its lifespan.
- Avoid touching the bulb immediately after use, as it may be hot.
- This bulb is designed for indoor use in dry conditions unless specified otherwise by the fixture.
- Kaua e wetewetehia, kaua hoki e whakarerekētia te pūangi. Kāore he wāhanga o roto e taea te whakatika.
- Kaua e taea e nga tamariki.
3. Tatūnga me te Tāuta
The V-TAC PRO VT-211 LED E27 Bulb is designed for simple installation into standard E27 lamp nga kaipupuri.
- Weto Whakakore: Before beginning installation, ensure the power supply to the light fixture is completely switched off at the main circuit breaker or wall switch.
- Tango Pupura Tawhito (mehemea e tika ana): Ki te whakakapi i tētahi pūangi o nāianei, tukua kia whakamatao rawa i mua i te wetewete mārire i te tīwiri mai i te rama ki te taha maui.amp kaipupuri.
- Tāuta Pūrama Hōu: Gently screw the V-TAC PRO VT-211 LED E27 Bulb clockwise into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Whakaora i te Mana: Kia oti te whakauru o te rama, whakahokia te hiko ki te rama rama.
Figure 2: E27 Holder. This illustration highlights the E27 screw base of the V-TAC LED bulb, indicating its compatibility with standard fixtures.
4. Nga Tohutohu Whakahaere
Operating the V-TAC PRO VT-211 LED E27 Bulb is straightforward:
- Once installed and power is restored, simply use the standard wall switch or fixture switch to turn the light on or off.
- The bulb provides a natural white light at 4000K, suitable for various environments requiring clear and bright illumination.
- It features a wide 200-degree beam angle, ensuring broad light distribution.
Figure 3: 200-Degree Beam Angle. This visual representation illustrates the V-TAC LED bulb's wide 200-degree light distribution, ensuring broad coverage.
5. Tiaki
The V-TAC PRO VT-211 LED E27 Bulb requires minimal maintenance.
- Te horoi: Me whakaweto te hiko, ā, kia mātao te pūangi i mua i te horoinga. Horoia mārire te pūangi ki te kakahu ngohengohe, maroke. Kaua e whakamahi i ngā wai horoi, i ngā mea whakakoi rānei.
- Karekau he waahanga e taea ana e te Kaiwhakamahi: The bulb contains no user-serviceable parts. Attempting to open or repair the bulb will void the warranty and may pose a safety risk.
6. Te Raru
If the bulb does not function correctly, consider the following:
- Kore Marama:
- Tirohia mēnā kei te 'ON' te whakakā hiko.
- Ensure the bulb is screwed in tightly and making proper contact with the lamp kaipupuri.
- Verify that the power supply to the fixture is active (e.g., check circuit breaker).
- Test the bulb in another working fixture to rule out a faulty fixture.
- keropi:
- Ensure the bulb is fully tightened.
- Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
- This bulb is designed for non-dimmable circuits. Using it with a dimmer switch may cause flickering or damage.
If problems persist after performing these checks, please contact customer support.
7. Whakatakotoranga
Detailed specifications for the V-TAC PRO VT-211 LED E27 Bulb:
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | V-TAC |
| Tau tauira | 21178 |
| Momo Maama | LED (Samsung SMD Chip) |
| Putunga Pupura | E27 |
| Whakamahi Hiko | 10.5 Watts |
| Whakataurite andrite | 75 Watts |
| Tae Maama | Mā māoriori (4000K) |
| Voltage | 220-240 Volts (AC) |
| Koki Kurupae | 200 nga nekehanga |
| Rahi Hua (L x W x H) | 7 x 15 x 39 cm (Bulb: 110 mm height, 60 mm diameter) |
| Taumaha | 1 kilogram (package weight) |
| Rauemi | Thermoplastic Bulb |
Figure 4: Dimensions Diagram. This technical diagram illustrates the bulb's height of 110 mm and diameter of 60 mm.
8. Pūtāhui me te Tautoko
The V-TAC PRO VT-211 LED E27 Bulb comes with a warranty period of at least 2 years from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any inquiries regarding your product, please contact your retailer or the V-TAC customer service department. Please have your proof of purchase and the product model number (21178) available when contacting support.
Spare parts availability is typically 1 year from the date of purchase.
