OPTIMA D200+ Battery Maintainer and Lithium Charger User Manual

Kupu Whakataki

The OPTIMA D200+ is a 12V performance battery maintainer and charger designed for various battery types, including Lithium (LiFePO4), AGM, and standard Flooded batteries. This device offers advanced features such as a 4-color Charge Mode Status LED bar, a dual-function battery gauge, and selectable performance profiles to optimize battery life and performance. Its weatherproof construction and integrated cable management make it suitable for both portable and wall-mounted use.

This manual provides essential information for the safe and effective operation, setup, and maintenance of your OPTIMA D200+ charger.

Nga Korero Haumaru Nui

Panuihia nga tohutohu katoa i mua i te whakamahi i tenei hua.

• Me mau tonu nga kakahu tiaki kanohi me nga kakahu whakamarumaru ina mahi ana me nga pākahiko.
• Ensure adequate ventilation when charging batteries to prevent the accumulation of explosive gases.
• Never smoke or allow a spark or flame in the vicinity of a battery or engine.
• Honoa ka momotuhia te putanga DC clamps only after setting the charger switch to the OFF position and removing the AC cord from the electrical outlet.
• Kaua e tukuna te rihi ki te ua, ki te makuku nui ranei.
• Kaua e taea e nga tamariki.
• Kaua e whakamahi i te rihi mena kua pa te whiu, kua taka, kua pakaru ranei.
• Ensure the AC power cord is properly routed to prevent tripping hazards or damage.

Nga waahanga hua

The OPTIMA D200+ is equipped with several features designed for convenience and optimal battery care:

• Hototahitanga Pūhiko Maha: Supports Lithium (LiFePO4), AGM, and Flooded 12V batteries.
• Whakahaere Taura Whakakotahi: Features a wrap for organized storage of AC and DC cables.
• Dual-Use Body Design: Allows for portable use or permanent wall mounting with the included bracket.
• Advanced LED Indicators: A 4-color LED bar displays charge mode status, alongside indicators for Connected, Power, and Check.
• Dual-Function Battery Gauge: Provides a pre-charge battery test and displays charging progress.
• Energy Saver Auto Maintain Mode: Monitors and maintains the battery at a full state of charge while minimizing AC power consumption.
• Hangarau Hononga Kore-korakora: Enhances safety during connection and disconnection.

Figure 1: OPTIMA D200+ Battery Maintainer with integrated cable management.

Whakaahua 2: Whakatata view of the D200+ LED display panel, showing Connected, Power, and Check indicators, along with the charge mode status bar.

Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• OPTIMA D200+ Battery Maintainer Unit
• Pūhiko Clamps (Whero me te Pango)
• Taiapa Whakaritea Taiepa
• Waea hiko AC

Figure 3: The wall organizer bracket for convenient storage.

Tatūnga

Te hono ki te Pūhiko

1. Ensure the OPTIMA D200+ is disconnected from AC power.
2. Whakauruhia te whero pai (+) clamp ki te tauranga pai (+) o te pākahiko.
3. Hono i te pango kino (-) clamp to the negative (-) terminal of the battery. For vehicle applications, if the battery is installed in the vehicle, connect the black negative (-) clamp ki te tahuhu waka, paraka miihini ranei mai i te pākahiko.
4. Kotahi te clamps are securely connected, plug the AC power cord into a standard electrical outlet.

Figure 4: The D200+ connected to a battery in a vehicle.

Whakapiri Taiepa (Kōwhiringa)

The D200+ can be mounted using the provided wall organizer bracket. Secure the bracket to a suitable surface using appropriate mounting hardware (not included). The charger unit then slides into the bracket for secure storage.

Nga Tohutohu Whakahaere

Power On and Initial Status

Once connected to both the battery and AC power, the charger will power on. The "Power" LED will illuminate, and the "Connected" LED will turn green if the connection is successful.

Tīpakonga Momo Pūhiko

The D200+ supports three battery types: OPTIMA LiFePO4, AGM, and Flooded. Press the "Select" button (located near the battery type indicators) to cycle through the options until the correct battery type is illuminated.

Figure 5: Indicators for OPTIMA Li, AGM, and Flooded battery types.

Pre-Charge Battery Test

Before charging, you can perform a pre-charge battery test. Press the "Test" button to view the current battery charge level on the dual-function battery gauge. This gauge displays the charge percentage mai i te 0% ki te 100%.

Figure 6: The "Test" button and battery charge level gauge.

Charging Process and Status Indicators

Once the battery type is selected, the D200+ will automatically begin the charging process. The 4-color Charge Mode Status LED bar will indicate the current charging phase:

• Tātari: Blue pulsing light.
• Utu: Maama whero totoka.
• Whakahau: Solid amber light.
• Pupuri Aunoa: Maama kaakaariki totoka.
• Hapa: OFF (no light).

The charger will transition to "Auto Maintain" mode once the battery is fully charged, ensuring optimal battery health without overcharging.

Te tiaki

• Kia ma, kia maroke te rihi. Horoia ki te ngohengohe, damp kakahu mehemea e tika ana.
• Regularly inspect the AC power cord and DC output cables for any signs of damage, cuts, or fraying. Do not use the charger if cables are damaged.
• Store the charger in a cool, dry place when not in use. Utilize the integrated cable management wrap for tidy storage.
• Ensure battery terminals are clean and free of corrosion before connecting the charger.

Raparongoā

If you encounter issues with your OPTIMA D200+, refer to the following common problems and solutions:

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the official OPTIMA website or contact OPTIMA customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

OPTIMA Customer Support: Visit OPTIMA Support Page