1. Kupu Whakataki
Welcome to the user manual for your new ENGWE L20 2.0 Electric Bike. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your e-bike. Please read it thoroughly before your first ride to ensure optimal performance and safety.
The ENGWE L20 2.0 is designed for urban commuting and recreational riding, featuring a powerful 750W (1125W Peak) brushless motor, a 52V 13Ah removable battery offering up to 68 miles of range, and a convenient foldable design. Its dual suspension and 20''x3.0" fat tires provide a comfortable and stable ride across various terrains.
Figure 1.1: The ENGWE L20 2.0 Electric Bike, showcasintōna anga pakari me ōna potae matotoru.
2. Aratohu Haumaru
Ko to haumaru te mea nui. Me whai tonu ki nga aratohu e whai ake nei:
- Mau he potae: Me mau tonu he potae pahikara kua whakaaetia, ā, e tika ana te taunga.
- Kia mau ki nga ture waka: Follow all local traffic laws, signs, and regulations.
- Takitaki i mua i te eke: I mua i ia haerenga, tirohia te pēhanga o ngā potae, te mahi a te parai, te taumata pākahiko, me te whakarite kia mau ngā wetewete tere me ngā here katoa.
- Nga Tikanga Huarere: Exercise caution when riding in wet conditions. Braking distance increases significantly on wet surfaces.
- Tirohanga: Use the integrated front and rear lights, especially during low-light conditions or at night. Consider wearing reflective clothing.
- Tau me te Taumaha o te Kaieke: This e-bike is designed for adults. The maximum weight recommendation is 265 pounds.
- A ape i nga Whakararuraru: Do not use mobile phones or other distracting devices while riding.
3. Ihirangi mokete
Upon opening your ENGWE L20 2.0 Electric Bike package, please verify that all the following components are included:
- ENGWE L20 2.0 Electric Bike (93% pre-assembled)
- 52V 13Ah Lithium-ion Battery (may be pre-installed or separate)
- 58.8V 2AH Charger
- Kete taputapu
- Pukapuka Kaiwhakamahi (tenei tuhinga)
- Pedals
- Front Fender and Rear Rack (pre-installed or requiring minor attachment)
If any items are missing or damaged, please contact ENGWE customer support immediately.
4. Tatūnga me te Huihuinga Tuatahi
Your ENGWE L20 2.0 Electric Bike arrives 93% pre-assembled. Follow these steps for final assembly and preparation for your first ride.
4.1 Unboxing and Unfolding
Carefully remove the bike from its packaging. Unfold the frame and secure the folding mechanisms. Ensure the handlebar stem is raised and locked into position.
Figure 4.1: The foldable design allows for easy transport and storage.
4.2 Handlebar and Seat Adjustment
Adjust the handlebar height and angle for a comfortable riding position. The L20 2.0 features an adjustable saddle suitable for various rider heights. Ensure the seat post is inserted past the minimum insertion line and the quick release is securely tightened.
4.3 Tāutanga Pedal
Identify the left (L) and right (R) pedals. Apply a small amount of grease to the pedal threads. Screw the pedals into the crank arms by hand, then tighten them firmly with a wrench. Remember, the left pedal tightens counter-clockwise.
4.4 Tāuta Pūhiko me te Whakatau
If the battery is not pre-installed, slide it into its compartment until it clicks securely. Before your first ride, fully charge the battery using the provided charger. The charging time is approximately 5-6 hours.
4.5 Video Guides for Assembly
Video 4.1: ENGWE L20 2.0 Electric Bike Unboxing & Assembly. This video provides a comprehensive guide to unboxing and assembling your e-bike.
Video 4.2: L20 2.0 --How to Install Folding Risers. A short guide on installing the folding risers for your e-bike.
Video 4.3: L20 2.0 - Mounting headlight (without basket version). Instructions for mounting the headlight on models without a front basket.
5. Operating Your ENGWE L20 2.0
Mā te mārama ki ngā mana whakahaere me ngā momo eke ka pai ake tō wheako.
5.1 Te Hia/Weto me te Whakaatu
Press and hold the power button on the display to turn the bike on or off. The display shows speed, battery level, riding mode, and trip distance. You can toggle the headlight on/off using the appropriate button on the control panel.
Video 5.1: Introduction to Display+Light+Tire. This video demonstrates the functions of the display, lights, and tire features.
5.2 Aratau Whakaeke
The ENGWE L20 2.0 offers multiple riding modes:
- Aratau Āwhina Pahikara (PAS): This mode provides electric assistance as you pedal. There are 5 levels of pedal assist, which can be adjusted using the '+' and '-' buttons on the control panel. Higher levels provide more assistance and speed. In PAS mode, the bike can reach up to 28 MPH.
- Electric-Only Throttle Mode: Engage the throttle for power without pedaling. In this mode, the top speed is limited to 20 MPH.
- Aratau ā-ringa: Ride the bike like a traditional bicycle without any electric assistance. The 7-speed gearbox allows for comfortable pedaling.
5.3 Pūnaha Piripiri
The e-bike is equipped with 180mm armored disc brakes for sensitive and stable stopping power. Always apply both front and rear brakes simultaneously for effective and safe braking. Practice braking in a safe area before riding in traffic.
Figure 5.2: Detail of the 180mm disc brake, providing reliable stopping power.
6. Tiaki
Ko te tiaki i nga wa katoa ka mau te roa me te mahi haumaru o to e-pahikara.
- Pēhanga Tire: Check tire pressure before each ride. Maintain the recommended PSI (indicated on the tire sidewall) for optimal performance and safety.
- Tirohanga Parai: Regularly inspect brake pads for wear and brake levers for proper tension. Ensure disc brakes are not rubbing.
- Whakahinuhinu mekameka: Kia ma, kia whakahinuhinuhia te mekameka kia kore ai te waikura me te whakarite i nga huringa taputapu maeneene.
- Tiaki Pūhiko: Store the battery in a cool, dry place. Avoid fully discharging the battery frequently. Charge it regularly, even if not in use, to maintain battery health.
- Te horoi: Horoia tō pahikara hiko me te pānuitangaamp kakahu me te hopi ngawari. Āta karohia te horoi pehanga teitei tika ki runga i ngā wāhanga hiko.
- Taki Tiaki: Tirohia ngā pūtu, ngā nati me ngā whakapūmau tere i ia wā, i ia wā, kia tino piri, kia mau hoki.
7. Te Raru
Anei etahi take noa me o raatau otinga ka taea:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te pahikara e whakakā | Kāore te pākahiko i utua, kāore rānei i whakanohoia tika; he koretake te hononga hiko. | Charge battery fully. Ensure battery is securely installed. Check main power cables for secure connection. |
| Kāore te motuka e āwhina / Kāore he urupare whakatere | Low battery; PAS level set to 0; brake lever engaged; motor or controller issue. | Charge battery. Increase PAS level. Ensure brake levers are fully released. If problem persists, contact support. |
| Brakes rubbing or squealing | Disc brake caliper misalignment; worn brake pads. | Adjust brake caliper alignment (refer to video below). Replace worn brake pads. |
| E05 Brake fault code | Brake sensor issue. | Refer to the dedicated troubleshooting video for this error code. |
7.1 Ataata Whakatau Rapanga
Video 7.1: L20 2.0 E05 Brake fault code troubleshooting. This video guides you through resolving the E05 brake fault code.
For issues not listed here, or if solutions do not resolve the problem, please contact ENGWE customer support.
8. Whakatakotoranga
Detailed technical specifications for the ENGWE L20 2.0 Electric Bike:
| Āhuahira | Whakatakotoranga |
|---|---|
| Momo Paihikara | Paihikara Hiko, Paihikara Maunga |
| Ingoa Tauira | L20 2.0 |
| Motini | 750W Brushless Rear Hub Motor (1125W Peak) |
| Topa | 75Nm |
| Top Speed (Pedal Assist) | Tae atu ki te 28 MPH |
| Top Speed (Electric-Only) | 20 MPH |
| Pūhiko | 52V 13Ah Lithium-ion |
| Awhe Max (Awhina Pedal) | Tae atu ki te 68 maero |
| Max Range (Electric Mode) | Tae atu ki te 28 maero |
| Waa Whakatau | 5-6 hours (with 58.8V 2AH charger) |
| Rauemi Tāpare | Konumohe |
| Rahi wira | 20 Inihi |
| Whanui Tire | 3.0 Inches (Fat Tires) |
| Momo Whakatarewa | Dual (Front Fork Suspension) |
| Kāhua Parai | Disc (180mm) |
| Te maha o nga tere | 7 |
| Nga Ahu Kopa | 40.2 x 17.7 x 31.5 inihi (102 x 45 x 80 cm) |
| Tohunga Taumaha Morahi | 265 Pauna |
| Teitei iti rawa o te Kaiwhakamahi | 165 Henemita |
| Tiwhikete | Tiwhikete UL 2849/GCC |
9. Pūtāhui me te Tautoko
ENGWE provides a limited 1-year warranty for the L20 2.0 Electric Bike. This warranty covers manufacturing defects and ensures your peace of mind.
For any questions, technical assistance, or warranty claims, please do not hesitate to contact our professional customer service team. We are committed to providing prompt support and will reply within 24 hours to resolve any issues as soon as possible.
Mōhiohio Whakapā:
- Īmēra: support@engwe-bikes.com
