Kupu Whakataki
Thank you for choosing the AQQA Aquarium Clip-On LED Light. This manual provides essential information for the proper installation, operation, and maintenance of your new aquarium light. Designed for freshwater aquariums, this 8W LED light offers full spectrum illumination, a 24/7 sunrise/sunset mode, and adjustable brightness levels to create an optimal environment for your aquatic life.
Nga korero haumaru
- Momotuhia te hiko hiko i mua i te mahi tiaki, horoi ranei.
- Ensure your hands are dry when handling the power adapter and controller.
- Do not immerse the power adapter or controller in water. The lamp panel is waterproof, but other components are not.
- Puritia te hua kia kore e taea e nga tamariki.
- Do not attempt to modify or repair the light. Contact customer support for assistance.
- Whakaritehia te voltage matches the product's requirements (AC100-240V).
Tohutohu Tatūnga
- Huihuia te Lamp: Kiriata te lamp tinana ki roto i te lamp holder until it is securely seated.
- Attach to Aquarium: Position the clip-on bracket onto the edge of your aquarium glass. Ensure the bracket is nested firmly on the wall of the fish tank.
- Tiakina te Taiapa: Tighten the screws on the bracket to secure the light firmly to the aquarium. The bracket is designed to fit various tank thicknesses without causing damage.
- Whakaritea Lamp Tūnga: Kei teamp body and holder are flexible. Adjust the extension length of the lamp freely to achieve desired coverage over your aquarium. The lamp body can also be completely removed from the bracket for alternative placement on a tank with a transparent glass cover.
- Hono Hono: Connect the USB cable from the light to the provided adapter. Plug the adapter into a standard electrical outlet. The light can also be powered by other USB power sources such as a power bank or laptop.
Whakaaturanga 1: Nga Waahi Whakauru
Figure 2: Clip-on Mechanism and Tank Compatibility
Nga Tohutohu Whakahaere
The AQQA Aquarium Clip-On LED Light features an inline controller with multiple buttons for various functions:
- Pātene ON/OFF: Ka whakakaha, ka weto ranei te rama.
- W+ Button (White Light Brightness): Adjusts the brightness of the white light. There are 10 adjustable brightness levels (10% to 100%).
- B+ Button (Blue/Red Light Brightness): Adjusts the brightness of the blue and red lights. There are 10 adjustable brightness levels (10% to 100%).
- M Button (Mode Selection): Cycles through the three lighting color modes:
- White + Green Light Mode
- Blue + Red Light Mode
- White + Red + Blue + Green Light Mode (Full Spectrum)
- Pātene TAIMA: Sets the daily timing function. Press to cycle through 6H, 10H, or 12H timer settings. Once set, the light will automatically cycle on/off at the same time each day. For example, if set for 6 hours at 9:20 AM, it will turn off at 3:20 PM and turn on again at 9:20 AM the next day.
- Sunrise/Sunset Button: Activates the 24/7 Sunrise and Sunset Mode.
Figure 3: Controller Overview
24/7 Sunrise and Sunset Mode
This mode provides a natural light cycle for your aquarium. In this mode, the light operates in full spectrum, and brightness cannot be manually adjusted. The cycle is divided into four stage:
- Stage 1 (Sunrise): Light brightness gradually increases from 5% to 100% over 3 hours.
- Stage 2 (Daylight): Maintains 100% brightness for 6 hours.
- Stage 3 (Sunset): Light brightness gradually decreases from 100% to 5% over 3 hours.
- Stage 4 (Night): Light transitions from 5% full spectrum to 5% blue light mode and maintains for 4 hours, then turns off.
Figure 4: 24/7 Sunrise and Sunset Mode Cycle and Color Modes
Mahi Mahara
The light retains your last selected color mode and brightness settings even after power disconnection. However, the timing function (6H, 10H, 12H, and Sunrise/Sunset mode) does not have a memory function and must be reset if power is interrupted.
Figure 5: Memory Function Details
Te tiaki
Regular maintenance ensures optimal performance and longevity of your AQQA Aquarium Clip-On LED Light.
- Te horoi: Ia wa, horoia te lamp body and LED panel with a soft, damp cloth to remove dust, water spots, or algae buildup. Ensure the light is unplugged before cleaning.
- Parewai: Kei teamp panel is designed with glue filling to enhance waterproofing. However, avoid submerging the entire unit or exposing the controller and adapter to water.
- Tirohanga taura: Regularly check the power cable and connections for any signs of damage or wear. If any damage is observed, discontinue use and contact customer support.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | Karekau he hiko; hononga wewete; urutau hapa. | Check if the adapter is properly plugged into the outlet and the USB cable is securely connected. Try a different USB power source or outlet. |
| Timing function not working correctly. | Power interruption; incorrect setting. | The timing function resets after a power cut. Re-set the desired timer (6H, 10H, 12H) or 24/7 mode. Ensure the button was pressed correctly. |
| Brightness or color mode cannot be adjusted. | Light is in 24/7 Sunrise/Sunset Mode. | In 24/7 mode, brightness and color are automatically controlled. Exit 24/7 mode to manually adjust brightness and color. |
| Ka whiti te marama, ka pohehe ohorere ranei. | Unstable power supply; loose connection; internal fault. | Ensure power connections are secure. Try a different power source. If the issue persists, contact customer support. |
Whakatakotoranga Hua
Figure 6: Product Parameters for 8W Model
| Āhuahira | Taipitopito |
|---|---|
| Ingoa Tauira | AQQA Aquarium Clip on Light AQ059 |
| Wattage | 8 watts |
| Whakauru Voltage | AC100-240V |
| Putanga Voltage | DC5V |
| Momo Puna Maama | LED (18 PCS: 2 Red, 2 Green, 2 Blue, 12 White 6500K) |
| Lumen | 339 |
| Te Paemahana Tae | 6500K |
| Product Dimensions (Light only) | 5.5"D x 1.97"W x 0.31"H |
| Overall Dimensions (with bracket) | 5.5"D x 1.97"W x 4.25"H |
| Taumaha Tūemi | 0.3 Kirokaramu (10.6 hekere) |
| Puna Mana | Corded Electric (USB and Adapter) |
| Te Roa Waea Hiko | 5ft (1.54m) |
| Momo Whakaeke | Topenga-i runga |
| Taumata Atete Wai | Waterproof (lamp panui) |
| Nga Waahanga kei roto | 1*Clip on light + 1*ABS brackets + 1* Adapter |
Pūtāhui me te Tautoko
This AQQA Aquarium Clip-On LED Light comes with a 1 tau te whakamana a te kaiwhakanao mai i te ra o te hokonga.
For any questions, concerns, or technical assistance, please contact AQQA customer support. Please have your model number (AQ059) and purchase information available when contacting support.
We are committed to providing long-term quality after-sales service.
