Pukapuka Kaiwhakamahi mō te Pouaka Rorohiko ENDORFY Ventum 200 ARGB ATX

1. Kupu Whakataki

Thank you for choosing the ENDORFY Ventum 200 ARGB ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system.

Whakaahua 1.1: The ENDORFY Ventum 200 ARGB ATX Computer Case, showcasing its sleek black design with a tempered glass side panel and illuminated ARGB fans visible through the mesh front.

2. Nga korero haumaru

Always observe the following safety precautions to prevent injury and damage to your components:

• Disconnect the power supply from the wall outlet before installing or removing any components.
• Kia mau ki te whitiki ringaringa anti-pateko hei aukati i te tukunga hiko (ESD) ki nga waahanga hiko tairongo.
• Handle components carefully. Avoid touching circuit boards directly.
• Ensure all cables are properly routed and secured to prevent interference with fans or other moving parts.
• Do not operate the computer case with the side panel removed unless performing maintenance or installation.

3. Ihirangi mokete

Manatokohia ko nga mea katoa e whai ake nei kei roto i to kete:

• ENDORFY Ventum 200 ARGB ATX Computer Case
• Pre-installed Stratus 120 PWM ARGB Fans (x4)
• Pouaka Taputapu (ngā tīwiri, ngā here taura, ngā mea e tū ana, te pukapuka kaiwhakamahi)
• Removable Dust Filters (top, front, bottom)

Whakaahua 3.1: He pahū view of the ENDORFY Ventum 200 ARGB case, illustrating its various components including the chassis, tempered glass side panel, mesh front panel, top and bottom dust filters, and individual fans.

4. Tatūnga me te Tāuta

Follow these steps for proper assembly of your computer system within the Ventum 200 ARGB case.

4.1. Removing Side Panels

To access the interior, unscrew the four thumb screws securing the tempered glass side panel. Carefully remove the panel and set it aside on a soft, flat surface to prevent scratches.

Whakaahua 4.1: Te taha view of the ENDORFY Ventum 200 ARGB case, highlighting the tempered glass side panel which provides a clear view of internal components and is secured by four thumb screws.

4.2. Whakauranga Papa Matua

1. Tāutahia te parepare I/O ki te paepae papahoa e tuwhera ana mai i roto o te keehi.
2. Align your ATX motherboard with the pre-installed standoffs.
3. Secure the motherboard using the appropriate screws from the accessory box.

4.3. Te Waenga Whakawhiwhi Hiko (PSU).

1. Slide the PSU into the dedicated compartment at the bottom rear of the case.
2. Whakaorangia te PSU me nga wiri mai i muri o te keehi.

4.4. Tāutanga Puku Rokiroki

The case supports multiple storage drives. Refer to the accessory box for specific mounting hardware for 2.5" SSDs and 3.5" HDDs.

4.5. Tāutanga Kāri Whakairoiro me te Kāri Whakawhanui

1. Tangohia nga uhi mokamoka PCIe e tika ana mai i muri o te keehi.
2. Insert your graphics card or other expansion cards into the motherboard's PCIe slots.
3. Whakauhia ngā kāri ki ngā tīwiri.

Whakaahua 4.2: He roto view of the ENDORFY Ventum 200 ARGB case, demonstrating ample space for a motherboard, graphics card, and other components, with pre-installed fans providing airflow.

4.6. Whakahaerenga Taura

Whakamahia ngā tapahi ara taura me ngā pūwāhi here i muri i te paepae papahoahoa hei whakahaere tika i ngā taura. Mā tēnei ka pai ake te rere o te hau me te ātaahua.

4.7. Te Tāutanga o te Pā me te Pāreti

The Ventum 200 ARGB supports up to 7 fans. Four Stratus 120 PWM ARGB fans are pre-installed. Additional fan and radiator configurations:

• Mua: Up to 3x 120mm or 2x 140mm fans, or up to 360mm radiator.
• Runga: Up to 2x 120mm or 2x 140mm fans, or up to 240mm radiator.
• muri: 1x 120mm fan.

Whakaahua 4.3: He roto view of the case with arrows indicating the various locations for fan installation, highlighting the capacity for up to 7 fans for optimal airflow.

5. Operating the ARGB Lighting

The Ventum 200 ARGB features pre-installed ARGB fans that can be controlled for customized lighting effects.

5.1. ARGB Control

The ARGB lighting can be controlled in two ways:

• Case Controller: Use the dedicated ARGB button on the top I/O panel to cycle through various lighting modes and colors.
• Pūmanawa Papa Matua: Connect the ARGB cable from the case's fan hub to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to synchronize and customize lighting effects.

Whakaahua 5.1: Close-up of the top I/O panel of the ENDORFY Ventum 200 ARGB case, showing the power button, reset button, USB 3.0 ports, audio jacks, and the dedicated ARGB control button.

6. Tiaki

Regular maintenance ensures optimal performance and extends the lifespan of your computer components.

6.1. Puehu Tātari Whakapai

The Ventum 200 ARGB case is equipped with removable dust filters on the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

• Gently pull out the filters.
• Whakamahia he hau kōpeke, he paraihe ngohengohe rānei hei tango i te puehu kua kohia.
• Rinse with water if necessary (ensure completely dry before reinstallation).
• Reinstall the filters securely.

Whakaahua 6.1: A close-up detail of the fine mesh front panel, designed to ensure very good airflow while protecting the interior from dust penetration. This mesh is part of the removable filter system.

6.2. Whakapai Whanui

Whakamahia he ngohengohe, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components, ensuring the system is powered off and unplugged.

7. Te Raru

Ko tenei waahanga e aro ana ki nga take noa ka pa ki a koe.

7.1. Karekau he Mana

• Me whakarite kei te tahuri te PSU, ā, kei te hono tika ki te putanga pakitara.
• Check all power connections to the motherboard, CPU, and graphics card.
• Verify that the front panel power switch cable is correctly connected to the motherboard's header.

7.2. Kāore ngā Pā e Hurihuri ana / Kāore te ARGB e Tahu Ana

• Check that the fans are properly connected to the fan hub or motherboard headers.
• Ensure the fan hub is receiving power (usually via SATA power connector).
• For ARGB, verify the 3-pin 5V ARGB cable is connected to a compatible motherboard header or that the case's ARGB button is being used.

7.3. Nga Take Whakawera

• Horoia ngā tātari puehu katoa me ngā wāhanga o roto.
• Me whakarite kia tika te aronga o ngā pā hau kia pai ai te rere o te hau (te whakaurunga/te putanga hau).
• Verify that CPU cooler and GPU fans are functioning properly.
• Whakapai ake i te whakahaere taura hei whakaiti i te aukati o te hau.

8. Whakatakotoranga

Detailed technical specifications for the ENDORFY Ventum 200 ARGB ATX Computer Case.

Whakaahua 8.1: Diagram illustrating the sleek and spacious design of the ENDORFY Ventum 200 ARGB case, capable of housing all components efficiently while maintaining a compact footprint.

9. Pūtāhui me te Tautoko

ENDORFY products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ENDORFY webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko.

• Whaimana Webpae: www.endorfy.com
• Tautoko Kiritaki: Refer to the 'Support' or 'Contact Us' section on the official webpae mo nga taipitopito whakapā a rohe.

Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.