Ranger DST-2420 Tire Balancer User Manual

1. Kupu Whakataki

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of the Ranger DST-2420 Tire Balancer. The DST-2420 is designed for accurate wheel balancing, featuring Digital Sensor Technology and a Direct-Axis drive system to ensure precise, vibration-free wheel balancing for various vehicle types.

Please read this manual thoroughly before operating the equipment. Retain this manual for future reference.

2. Nga korero haumaru

WARNING: Failure to follow these safety instructions may result in serious injury or equipment damage.

• Me mau tonu nga taputapu whakamarumaru whaiaro (PPE), tae atu ki nga karaehe haumaru me nga karapu.
• Ensure the balancer is installed on a level, stable surface capable of supporting its weight and the weight of the wheel being balanced.
• Momotuhia te hiko i mua i te mahi tiaki, ratonga ranei.
• Tiakina nga ringa, nga makawe, me nga kakahu kua wetekina mai i nga waahanga neke i te wa e mahi ana.
• Do not operate the balancer if any parts are damaged or missing.
• Ko ngā kaimahi kua whai mana, kua whakangungua anake me whakahaere i tēnei taputapu.
• Kia ma te waahi mahi me te whakamarama pai.

3. Nga Waahanga Hua me nga waahanga

The Ranger DST-2420 Tire Balancer includes the following key components and features:

• Paewhiri Mana: Digital display and input buttons for operation.
• Wheel Shaft: 40mm shaft for mounting wheels.
• Mounting Cone Package: Various cones to accommodate different wheel hub sizes.
• Tape Weight Feeder: Dispenser for adhesive wheel weights.
• Wheel Weight Starter Kit: Initial supply of wheel weights.
• Multi-directional Quartz Piezoelectric Load Sensors: For precise weight measurement.
• Direct-Axis Drive System: Ensures accurate and repeatable balancing.
• Taupoki Tiaki: Covers the wheel during rotation for safety.

Whakaatu 3.1: Neke Atuview of the Ranger DST-2420 Tire Balancer with a wheel mounted.

Figure 3.2: Close-up of the control panel and integrated storage trays for wheel weights.

Figure 3.3: Detail of the tape weight feeder, designed for convenient access to adhesive weights.

Figure 3.4: Integrated storage rack for various mounting cones and accessories.

4. Tatūnga me te Tāuta

1. Wewete ana: Carefully remove the balancer from its packaging. Inspect for any shipping damage.
2. Turanga: Position the balancer on a solid, level concrete floor. Ensure adequate space around the machine for safe operation and maintenance.
3. Puranga: Secure the balancer to the floor using appropriate anchor bolts (not included) to prevent movement during operation.
4. Hononga Hiko: Connect the balancer to a dedicated electrical circuit as specified in the electrical requirements section (refer to specifications). Ensure the power supply matches the machine's requirements.
5. Whakaritenga Tuatahi: Perform the initial calibration procedure as outlined in the separate calibration guide (if provided) or the on-screen prompts.

Whakaahua 4.1: Taha view of the balancer, illustrating its compact footprint for placement.

5. Nga Tohutohu Whakahaere

1. Whakaeke i te Wiira:
   • Select the correct mounting cone for the wheel's center bore.
   • Place the wheel onto the 40mm shaft, ensuring it is centered and snug against the cone.
   • Secure the wheel with the quick-release wing nut or appropriate clampte taputapu.
2. Inputting Wheel Data:
   • Manually input the wheel's diameter, width, and offset using the control panel buttons.
   • Verify the entered data on the digital display.
3. Starting the Balance Cycle:
   • Lower the protective hood.
   • Press the "START" button on the control panel. The machine will rotate the wheel to measure imbalance.
4. Applying Wheel Weights:
   • Once the cycle is complete, the display will indicate the required weight amount and location for both inner and outer planes.
   • Rotate the wheel manually to the indicated position for weight placement.
   • Select the appropriate weight from the wheel weight starter kit or tape weight feeder.
   • Apply the weight to the designated area on the wheel rim.
5. Re-checking Balance:
   • Repeat the balance cycle by pressing "START" to confirm the wheel is balanced.
   • Adjust weights as necessary until the display shows zero or minimal imbalance.
6. Removing the Wheel:
   • Raise the protective hood.
   • Loosen the quick-release wing nut and carefully remove the balanced wheel from the shaft.

6. Tiaki

Regular maintenance ensures the longevity and accuracy of your Ranger DST-2420 Tire Balancer.

• Ia rā:
  • Clean the machine, especially the shaft and mounting surfaces, to remove dirt and debris.
  • Tirohia te taura hiko mo te kino.
• Ia wiki:
  • Tirohia nga toromoka katoa mo te piri.
  • Inspect the protective hood for cracks or damage.
• Marama:
  • Perform a calibration check using a known good test wheel.
  • Lubricate moving parts as specified in the detailed service manual (if applicable).
• Tau:
  • Have the machine inspected by a qualified service technician.

CAUTION: Always disconnect power before performing any maintenance.

7. Te Raru

8. Whakatakotoranga

9. Nga Korero Whakaputanga

Specific warranty details for the Ranger DST-2420 Tire Balancer are provided by the manufacturer, Bendpak. Please refer to the warranty card included with your product or visit the official Ranger/Bendpak website for the most current and comprehensive warranty policy. Keep your proof of purchase for warranty claims.

10. Tautoko Kiritaki

For technical assistance, parts, or service inquiries regarding your Ranger DST-2420 Tire Balancer, please contact Bendpak customer support.

Kaihanga: Bendpak

Tena koa tirohia te rangatira Ranger Store on Amazon or the Bendpak corporate webpae mo nga korero whakapā me nga rauemi tautoko.