Xigmatek Blade Computer Case User Manual

1. Kupu Whakataki

Thank you for choosing the Xigmatek Blade ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer chassis. The Xigmatek Blade is designed for high-performance PC builds, featuring a spacious ATX structure, a stylish tempered glass side panel, and efficient cooling with pre-installed 120mm fans.

2. Nga korero haumaru

Please read and understand all safety instructions before installing or operating the computer case. Failure to do so may result in personal injury or damage to the product.

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance inside the case.
• Be aware of sharp edges inside the chassis. Handle components with care to avoid cuts.
• Wear an anti-static wrist strap when handling internal components to prevent electrostatic discharge (ESD) damage.
• Me whakarite kia tika te hau huri noa i te pouaka hei ārai i te wera nui.
• Keep the case away from liquids, excessive heat, and direct sunlight.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Xigmatek Blade ATX Computer Case
• Accessory Box (containing screws, standoffs, cable ties, etc.)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Tatūnga me te Tāuta

Follow these steps for proper assembly and installation of your PC components into the Xigmatek Blade case.

4.1. Whakaritenga

• Unpack the case carefully and place it on a stable, flat surface.
• Gather necessary tools: Phillips head screwdriver, cable ties (some included), anti-static wrist strap.

Whakaahua 1: Taha-mua view of the Xigmatek Blade ATX Computer Case, showcasing the tempered glass panel and three front-mounted RGB fans, along with a single rear RGB fan.

4.2. Whakauranga Papa Matua

1. Tāutahia te whakangungu I/O ki roto i te pūaha o muri o te pouaka.
2. Align the motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor (Micro ATX compatible).
3. Whakamaua te papahoahoa mā te whakamahi i ngā tīwiri kua whakaratohia. Kaua e whakakī rawa.

4.3. Te Waenga Whakawhiwhi Hiko (PSU).

1. Mount the PSU into the designated rear bottom compartment.
2. Whakaorangia te PSU me nga wiri mai i muri o te keehi.
3. Arahia ngā taura hiko e tika ana mā roto i ngā tapahanga whakahaere taura.

Whakaahua 2: Whakamuri view of the Xigmatek Blade ATX Computer Case, showing the power supply mounting area, expansion slots, and the exhaust fan.

4.4. Tāutanga Puku Rokiroki

• Locate the 2.5" SSD/3.5" HDD drive bays.
• Install your storage drives using the appropriate screws.

4.5. Tāutanga Kāri Whakairoiro me te Kāri Whakawhanui

1. Tangohia nga uhi mokamoka PCIe e tika ana mai i muri o te keehi.
2. Insert your graphics card or other expansion cards into the motherboard's PCIe slots.
3. Whakauhia ngā kāri ki ngā tīwiri.

4.6. Whakahaerenga Taura

Whakamahia nga tapahi ararere taura me nga tohu here ki muri i te paepae papahoahoa hei whakarite taura. Ma tenei ka pai ake te rere o te hau me te rerehua.

4.7. Hononga Paewhiri Mua

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0/3.0, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

5. Mahi

Kia oti ngā wāhanga katoa te tāuta, kia honoa hoki ngā taura, ka taea e koe te whakakā i tō pūnaha.

• Pātene Hiko: Located on the top/front panel of the case. Press to turn on or off your PC.
• Patene Tautuhi Anō: Located near the power button. Press to restart your PC.
• Tauranga USB: Use the front USB ports for connecting peripherals.
• Jacks Ororongo: Connect headphones and microphones to the front audio jacks.

6. Tiaki

Regular maintenance helps ensure optimal performance and longevity of your computer components.

• Tātari Puehu: The Xigmatek Blade case may include removable dust filters (e.g., on the top, front, or bottom). Clean these filters regularly (monthly or bi-monthly) by removing them and washing with water or brushing off dust. Allow them to dry completely before re-installing.
• Horoi o Roto: Periodically use compressed air to blow dust out of the case interior, especially from fans, heatsinks, and vents.
• Horoi o waho: Horoia nga mata o waho ki te ngohengohe, damp kakahu. A ape i nga matū kino.

7. Te Raru

If you encounter issues with your Xigmatek Blade case, refer to the following common troubleshooting tips:

• Kore Mana:
  • Me whakarite kei te tahuri te PSU, ā, kei te hono tika ki te putanga pakitara.
  • Manatokohia kei te tika te hono o te taura pana hiko o te papa o mua ki te pane o te papahoahoa.
  • Tirohia nga hononga hiko katoa ki te papahoahoa me nga waahanga.
• Ngā Pā Kāore e Hurihuri:
  • Confirm that the fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
• Kāore te USB/Ororongo o te Papa o Mua e Mahi Ana:
  • Ensure the USB and audio headers from the front panel are correctly plugged into the motherboard.
  • Check your operating system's device manager for driver issues.
• Te wera nui:
  • Horoia ngā tātari puehu me ngā wāhanga o roto e ai ki te whakaahuatanga i te wāhanga Tiaki.
  • Kia tika te rere o te hau mā te tirotiro i te whakatakotoranga o te pā hau me te whakahaere taura.
  • Consider adding more fans or upgrading your CPU cooler if temperatures remain high.

8. Whakatakotoranga

Key specifications for the Xigmatek Blade Computer Case:

9. Pūtāhui me te Tautoko

Xigmatek products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Xigmatek webpae. Puritia to tohu hoko mo nga kereme whakamana.

For technical support or further inquiries, please contact Xigmatek customer service through their official channels. You can typically find contact information on the Xigmatek webpae.

Note: Specific warranty details and support contact information are not provided in this general manual. Please refer to the manufacturer's official resources.