KOORUI KR20Y Single Monitor Desk Mount User Manual

Kupu Whakataki

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

Nga korero haumaru

Kia mau ki ngā mahi ārai haumaru e whai ake nei hei ārai i te whara, i te kino rānei:

• Kaua e neke ake i te kaha o te kawenga o te 9 kg (19.8 lbs).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• Tiakina nga tamariki me nga kararehe i te wa e whakauru ana.
• Check all connections and fasteners regularly to ensure they remain secure.
• Avoid pinching cables during adjustment to prevent damage.

Ihirangi mokete

Tena koa tirohia kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• Aroturuki Arm Assembly
• C-Clamp Whakaekea taputapu
• Pūmārō Whakamau Grommet
• Pereti VESA
• Ngā tīwiri whakapuru matawai (ngā rahi rerekē)
• Hex Keys / Adjustment Tools
• Topenga Whakahaere Taura
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

Whakatakotoranga

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

Tatūnga me te Tāuta

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp Maunga me te Maunga Grommet.

1. C-Clamp Maunga

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. Whakauruhia te C-clamp raro ki te taha o tō tēpu.
2. Whakapikitia te clamp tīwirihia kia mau rawa te turanga ki te tēpu. Kia mau, kia kore e wiri.
3. Whakauruhia te pou matua o te ringa aroturuki ki roto i te C-clamp turanga.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Wetewetehia te C-clamp ngā wāhanga mai i te turanga mēnā kua tāpirihia i mua.
2. Insert the grommet bolt through the pre-drilled hole in your desk.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Kōkuhuhia te pou matua o te ringa o te aroturuki ki roto i te turanga grommet.
5. Secure the pole with the provided screw or knob.

3. Te Tāpiri i te Aroturuki

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. Whakahaerenga Taura

Arahia ngā taura o tō mata tirotiro mā roto i ngā hongere whakahaere taura kua whakauruhia ki te ringaringa kia pai ai te āhua o te wāhi mahi.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

Nga Tohutohu Whakahaere

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewte wheako.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. Whakatikatika Teitei

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see Te tiaki wahanga).

2. Whakatikatika Honga

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewte koki whakatītaha. Ko te awhe whakatītaha he +85° ki te -30°.

3. Whakatikatika hurihuri

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

Whakaahua: He X-ray view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

Te tiaki

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• Te horoi: Horoia te ringa o te aroturuki ki te wai ngohengohe,amp kakahu. A ape i te kai horoi, te whakarewa ranei.
• Tirohanga Ia Wa: Regularly check all screws and connections to ensure they are tight and secure.

Raparongoā

Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.