SmallRig AP-20 Carbon Fiber Tripod User Manual

Kupu Whakataki

The SmallRig AP-20 Carbon Fiber Tripod is a versatile and lightweight support system designed for photographers and videographers. It features a durable carbon fiber construction, a 360-degree detachable ball head, and a 2-in-1 design that allows it to function as both a tripod and a monopod. This manual provides detailed instructions for the proper setup, operation, and maintenance of your AP-20 tripod.

Nga korero haumaru

• Ensure all locks are securely fastened before mounting equipment or moving the tripod.
• Do not exceed the maximum payload capacity of 26.5 lbs (12 kg).
• Avoid placing the tripod on unstable or slippery surfaces.
• Keep hands and fingers clear of moving parts, especially when extending or folding legs.
• Do not leave equipment unattended on the tripod in windy conditions.

Ihirangi mokete

Tena koa tirohia kei roto katoa nga mea e whai ake nei ki to kete:

• SmallRig Carbon Fiber Tripod x 1
• Storage Package (Carrying Bag) x 1
• Pukapuka Kaiwhakamahi x 1

Figure 1: Package Contents and Basic Specifications

Ka mutu te huaview

Familiarize yourself with the main components of your SmallRig AP-20 tripod.

Figure 2: SmallRig AP-20 Carbon Fiber Tripod

Whakaatu 3: Nga waahanga matua me nga waahanga

Figure 4: Ball Head Details

Tatūnga

1. Te Whakatuwhera i te Tripod

1. Release the leg locks on each leg.
2. Extend the legs to your desired height. The 4-section legs feature quick release flip-locks for easy adjustment.
3. Adjust the leg angles using the quick-adjustment buckles. The tripod offers three adjustable angles: 23°, 55°, and 85°.
4. Ensure all leg locks and angle adjustments are securely fastened before use.

Pikitia 5: 3-Stage Support Angles

2. Te taapiri i to kamera

1. Ensure the quick release plate is detached from the ball head.
2. Securely attach your camera to the quick release plate using the 1/4"-20 screw.
3. Slide the quick release plate with your camera into the ball head receiver until it clicks into place. Tighten any locking mechanisms on the ball head to secure the plate.

Nga Tohutohu Whakahaere

1. Adjusting Tripod Height and Angle

The tripod's 4-section telescopic legs can be adjusted from a minimum height of 20 inches (51 cm) to a maximum height of 62.2 inches (158 cm) using the flip-locks. The leg angle adjustment buckles allow for quick changes between 23°, 55°, and 85° to adapt to various terrains and shooting requirements.

Figure 6: Height Adjustments

2. Using the Ball Head

The detachable ball head provides flexible camera positioning. Use the damping adjustment knob to control the tension of the ball joint, allowing for smooth 360° swivel and 90° tilt movements. The 360° horizontal scale on the ball head base assists in precise panoramic alignment.

3. Monopod Functionality

One of the tripod legs can be detached and combined with the center column and ball head to form a monopod. This is ideal for situations requiring quick mobility or when space is limited. To convert:

1. Unscrew the leg with the foam grip from the tripod spider.
2. Wetekina te pane pōro mai i te pou waenga.
3. Attach the ball head to the top of the detached leg.
4. The monopod can extend up to 64.2 inches (163 cm).

4. Reversible Center Column for Low-Angle Shots

For extreme low-angle photography, the center column can be inverted:

1. Wetekina te matau i te raro o te pou waenga.
2. Remove the center column from the tripod spider.
3. Reinsert the center column upside down into the tripod spider and tighten it.
4. Attach your camera to the inverted column for ground-level perspectives.

Figure 7: Inverted Center Column Setup

5. Accessory Expansion

The tripod bracket includes 1/4"-20 threaded holes, allowing for the attachment of external accessories such as magic arms, mobile phone holders, or monitors.

Te tiaki

• Te horoi: Horoia te tūru ki tētahi kakahu ngohengohe, maroke i muri i ia whakamahinga. Mō te paru uaua, whakamahia he wai pakupaku.amp kakahu me te hopi ngawari, kātahi ka whakamaroke kia tino maroke. Āta karohia ngā matū kino.
• Rokiroki: Rokirokihia te tūāpapa i roto i tana putea kawe ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me te pāmahana tino kino.
• Whakahinuhinu: Moving parts are generally self-lubricating. Do not apply oil or grease unless specifically instructed by SmallRig support.
• Tirotiro: Periodically check all screws, locks, and joints for tightness and wear. Tighten any loose screws with the provided hex key.

Raparongoā

• Kāore i te pumau te āhua o te tūāpapa: Ensure all leg sections are fully extended and all flip-locks are securely closed. Verify that the leg angle adjustment buckles are engaged. Check that the quick release plate and camera are firmly attached to the ball head.
• Legs are difficult to extend/retract: Check for any debris or dirt in the leg sections. Clean as per maintenance instructions. If the issue persists, the leg tension screws may need minor adjustment (refer to manufacturer support if unsure).
• Ball head movement is not smooth: Me whakarite te damping adjustment knob is not overtightened. Clean the ball head area to remove any dust or grit.
• Camera wobbles on ball head: Confirm the quick release plate is properly seated and locked. Ensure the camera is securely mounted to the quick release plate.

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information, product registration, or technical support, please visit the official SmallRig webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.

SmallRig Official Webpae: www.smallrig.com