1. Kupu Whakataki
Thank you for choosing the ALLmeter Pinless Moisture Meter Model ALL019-DEFBA. This device is designed for non-invasive measurement of moisture content in various materials such as wood, walls, drywall, and masonry. Its advanced technology ensures accurate readings without causing damage to surfaces. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your moisture meter to ensure optimal performance and longevity.
2. Nga Korero Haumaru Nui
- Me ata panui nga tohutohu katoa i mua i te whakahaere i te taputapu.
- Do not attempt to open or modify the device. There are no user-serviceable parts inside.
- Purihia te taputapu mai i te wai me te makuku nui kia kore ai e pakaru.
- A ape i te tuku i te taputapu ki nga wera nui, ki te ra tika ranei mo nga wa roa.
- Tangohia ngā pākahiko mēnā kāore te taputapu e whakamahia mō te wā roa hei ārai i te turuturu o te pākahiko.
- Makahia nga pākahiko me te taputapu kia rite ki nga ture o te rohe.
3. Ihirangi mokete
Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:
- ALLmeter Pinless Moisture Meter (Model ALL019-DEFBA)
- Pūhiko AAA (3 ngā wahi)
- Pukapuka Kaiwhakamahi
- Kawea Pukoro
Image 3.1: The ALLmeter Pinless Moisture Meter package contents, showing the meter, three AAA batteries, a user manual, and a gray carry pouch.
4. Hua Neke Atuview
4.1 Tahora Pūrere
Whakaahua 4.1.1: Mua view of the ALLmeter Pinless Moisture Meter, highlighting its ergonomic design, large LCD display, and central control panel.
4.2 Patene Mana
Whakaahua 4.2.1: Taipitopito view of the control buttons on the ALLmeter Pinless Moisture Meter. These include SET (for alarm level modification), DEN (for wood density switching), Power, HOLD, and MODE (for switching measurement modes).
- Pātene Hiko (⑂): Pēhia kia whakakā, whakaweto rānei te taputapu.
- MODE Button (▼): Press to cycle through different measurement modes (WALL, MASONRY, SOFTWOOD, HARDWOOD).
- SET Button (▲): Used to adjust alarm levels or other settings.
- DEN Button (▲): Used to switch between different wood density grades when in wood measurement modes.
- Pātene HOLD: Ka whakatio i te panui o naianei kei te whakaaturanga. Patohia ano kia tukuna.
4.3 Whakaatu Huanga
Image 4.3.1: The LCD display of the ALLmeter Pinless Moisture Meter, indicating low battery, moisture bar display, moisture value, wood density grade (MBB), data hold symbol (HOLD), and current measuring mode.
- Tohu Pūhiko Iti: Ka puta te ata ina iti te mana o te pākahiko.
- Moisture Bar Display: Graphical representation of moisture level.
- Moisture Value: Digital display of the measured moisture percentage.
- Wood Density Grade (MBB): Indicates the selected wood density setting.
- Data Hold Symbol (HOLD): Appears when the HOLD function is active.
- Measuring Mode Indication: Displays the currently selected material mode (e.g., WALL, MASONRY, SOFTWOOD, HARDWOOD).
5. Tatūnga
5.1 Tāuta Pūhiko
- Kimihia te uhi o te wahanga pākahiko kei muri o te taputapu.
- Kiriata, wetekina ranei te uhi hei whakatuwhera i te wahanga.
- Whakauruhia kia toru (3) nga pākahiko AAA, kia tika te polarity (+/-) kua tohua ki roto i te waahanga.
- Whakakapihia te uhi o te wahanga pākahiko kia mau.
6. Nga Tohutohu Whakahaere
6.1 Hiko / Whakaweto
- To turn on: Press the Power button (⑂). The display will illuminate.
- To turn off: Press and hold the Power button (⑂) for approximately 2 seconds. The device also features an auto power-off function to conserve battery life after a period of inactivity.
6.2 Te Kōwhiri i te Aratau Ine
- After powering on, press the MODE button (▼) repeatedly to cycle through the available material modes: WALL, MASONRY, SOFTWOOD, HARDWOOD.
- Select the mode that corresponds to the material you intend to measure.
6.3 Te Whanganga
- Ensure the correct measurement mode is selected.
- Place the back of the meter (the sensing plate area) flat against the surface of the material you wish to measure. Ensure full contact.
- The moisture reading will be displayed instantly on the LCD screen.
- Move the meter across the surface to check for variations in moisture content.
6.4 Mahi HOLD
- While taking a measurement, press the HOLD button to freeze the current reading on the display. This is useful for reading measurements in hard-to-reach areas.
- Press the HOLD button again to release the reading and resume live measurement.
6.5 Audible Alarm Settings
- The device features an audible alarm that activates when the measured moisture level exceeds a preset threshold for the selected material.
- To adjust the alarm threshold, press the SET button (▲). Follow the on-screen prompts to increase or decrease the alarm percentage.
6.6 Wood Density Adjustment (DEN)
- When in SOFTWOOD or HARDWOOD mode, the DEN button (▲) can be used to cycle through different wood density grades (MBB) for more accurate readings based on the specific wood type. Refer to wood density charts for your material.
7. Ngā Aratau Ine me ngā Awhe
The ALLmeter Pinless Moisture Meter provides distinct measurement ranges and visual indicators for different moisture levels across various materials.
Image 7.1: The visual moisture alarm system and a table detailing the 'Dry', 'Mid', and 'Wet' moisture percentage ranges for Wall, Masonry, Softwood, and Hardwood materials.
7.1 Moisture Level Indicators
- Kākāriki: Indicates a Dry moisture level.
- Kowhai: Indicates a Mid-range moisture level.
- Whero: Indicates a Wet moisture level, potentially requiring attention.
7.2 Measurement Ranges by Material
| Aratau Ine | maroke | Waenganui | Mākū |
|---|---|---|---|
| PAIA | <8% | 8-11.9% | ≥12% |
| MONONI | <17% | 17-19.9% | ≥20% |
| RAU NGORANGA | <13% | 13-17.9% | ≥18% |
| HE TINO | <12% | 12-15.9% | ≥16% |
7.3 Non-Invasive Measurement Principle
The ALLmeter Pinless Moisture Meter utilizes advanced inductive surveying technology. This method allows for moisture detection without penetrating the material surface, preventing damage. Unlike destructive surveying methods that require pins or probes, the pinless meter provides quick and clean readings.
Image 7.3.1: A visual comparison between inductive (pinless) surveying, which leaves no marks, and destructive (pin-type) surveying, which creates small holes in the material.
7.4 Ngā Taupānga Maha
This moisture meter is versatile and suitable for a wide range of applications in home inspection, construction, and woodworking:
Whakaahua 7.4.1: Examples of the meter's application on various materials including walls, masonry, softwood, and hardwood.
8. Tiaki
- Te horoi: Horoia te taputapu ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Rokiroki: Store the meter in its carry pouch in a cool, dry place when not in use. Avoid areas with extreme temperatures or high humidity.
- Whakakapinga Pūhiko: Whakakapihia nga pākahiko ina puta te tohu pākahiko iti ki te whakaaturanga.
9. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore te taputapu i te hiko | Nga pākahiko kua mate, kua he ranei te whakaurunga | Tirohia te āhua o te pākahiko; whakakapia ki ngā pākahiko AAA hou. |
| Nga korero tika | Incorrect measurement mode selected; poor contact with surface; device malfunction. | Ensure correct mode is selected for the material; press the meter firmly and flat against the surface; if problem persists, contact customer support. |
| Display is blank or flickering | He iti te pākahiko; he hapa te pūrere. | Replace batteries; if problem persists, contact customer support. |
| Kare e mahi ana te whakaoho tangi | Alarm disabled or volume too low; device malfunction. | Check alarm settings using the SET button; ensure moisture level exceeds threshold; if problem persists, contact customer support. |
10. Whakatakotoranga Hangarau
| Whakatakotoranga | Uara |
|---|---|
| Tau tauira | ALL019-DEFBA |
| Waitohu | KATOA mita |
| Tikanga Ine | Pinless, Inductive |
| Sensing Depth | 5 cm |
| Sensing Plate Size | 5 x 6 cm |
| Tika | ±4% |
| Whakaatu | LCD Color Display with Analog Bar |
| Puna Mana | 3 x AAA Pūhiko |
| Hiko-Aunoa | Ae |
| Whakaoho Rongo | Ae |
| Taumaha Tūemi | 231 g (0.23 Kirokaramu) |
| Ahu mōkihi | 19.4 x 8.8 x 4.2 cm |
11. Pūtāhui me te Tautoko Kiritaki
For warranty information, technical assistance, or customer support, please refer to the contact details provided with your purchase documentation or visit the official ALLmeter website. Please have your model number (ALL019-DEFBA) and purchase date available when contacting support.
