1. Kupu Whakataki
Thank you for choosing the ALUSSO Dusk to Dawn Outdoor Lighting. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Whakaahua 1.1: ALUSSO Dusk to Dawn Outdoor Lighting fixtures.
This 25W, 2000LM outdoor light features three selectable color temperatures (3000K, 4000K, 6000K) and two operating modes: Dusk to Dawn (D2D) and Always On. Designed for hardwired installation, it is IP65 rated for outdoor use in various weather conditions.
2. Nga Korero Haumaru Nui
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Me whakauru tenei hua ki runga i te waehere whakaurunga e tika ana ma te tangata e mohio ana ki te hanga me te mahi o te hua me nga aitua e pa ana.
- The fixture is a Class II lighting product, meaning it does not require a ground wire for installation, enhancing safety.
- Ensure the power supply is 120 Volts AC. This light is hardwired and is kaore solar-powered or battery-powered.
- The fixture is IP65 rated, making it suitable for wet outdoor locations and resistant to dust and water jets.
- Awhe pāmahana whakahaere: -4°F ki te 104°F (-20°C ki te 40°C).
- The base of the light is designed to fit 3-inch or 3.5-inch round junction boxes only. It is kaore compatible with 4-inch or larger junction boxes.
3. Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- ALUSSO Dusk to Dawn Outdoor Light Fixture (2 units)
- Maunga Paetahi
- Tūhono Waea
- Whakaeke Tiu
- Puka
- Pukapuka Tohutohu
Note: A junction box is not included and must be purchased separately if not already present.
Whakaahua 3.1: Included accessories and a visual overview o te tukanga whakauru.
4. Whakatakotoranga Hua
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | ALUSSO |
| Tau tauira | YDR03-225D8-B-2 |
| Mana | 25 Watts |
| Tirohanga | 2000 Lumens |
| Paemahana Tae (CCT) | 3000K (Warm White), 4000K (Kūpapa Mā), 6000K (Matao |
| Aratau Mahi | Dusk to Dawn (D2D), Always On |
| Whakatauranga parewai | IP65 |
| Voltage | 120 Volts |
| Rauemi | Plastic (body), Aluminum (shade) |
| Hunga Hua | 8.6"L x 7.1"W x 5.1"H |
| Koki Kurupae | 90° |
| Momo Whakaeke | Wall Mount, Soffit Mount |
Whakaahua 4.1: The ALUSSO outdoor light is designed for all weather conditions, featuring IP65 wet rating, cold resistance, and UV resistance.
5. Tāutanga
5.1 Tuhinga o mua
- Whakawetohia te Mana: Before starting any electrical work, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
- Whakapaia te Mata Maunga: The fixture is designed for wall or soffit mounting. Ensure the existing junction box is 3-inch or 3.5-inch round.
- Wewete Ihirangi: Carefully remove all components from the packaging and verify against the package contents list.
5.2 Nga Huringa Whakapiki
Refer to Figure 3.1 for a visual guide during installation.
- Āpiti Taiapa Whakapuru: Secure the mounting bracket to your existing 3-inch or 3.5-inch round junction box using the provided screws. Ensure it is firmly attached.
- Hononga Waea: Connect the household electrical wires to the fixture's wires using the provided wire connectors. Connect the live (black) wire from the junction box to the live (black) wire of the fixture, and the neutral (white) wire from the junction box to the neutral (white) wire of the fixture. As this is a Class II fixture, a ground wire connection is not required.
- Whakaritenga Haumaru: Carefully tuck the connected wires into the junction box. Align the fixture with the mounting bracket and secure it using the remaining screws. Ensure the gasket is properly seated to maintain the IP65 rating.
- Whakaritea nga Upoko Maama: The light heads can be rotated up to 330° and tilted up to 120° to direct illumination as needed. Adjust them to your desired angle.
Whakaahua 5.1: The ALUSSO outdoor light can be installed as a soffit mount or a wall mount.
5.3 I muri i te whakaurunga
Once the fixture is securely installed and wired, restore power at the circuit breaker. The light will perform an initial power-on sequence.
6. Nga Tohutohu Whakahaere
6.1 Te Waahanga Tae (CCT) Whiriwhiringa
Your ALUSSO outdoor light offers three color temperature options: Warm White (3000K), Neutral White (4000K), and Cool White (6000K).
- To select the desired color temperature, locate the small slider switch on the side of the light fixture.
- Slide the switch to the position labeled 'WW' for 3000K, 'NW' for 4000K, or 'CW' for 6000K.
- Make this selection before final installation or when power is off for safety.
Whakaahua 6.1: Adjusting the 3CCT switch on the fixture.
6.2 Aratau Mahi
The light features two operating modes, selectable via your standard wall switch:
- Dusk to Dawn (D2D) Mode: In this mode, the light automatically turns on when it gets dark and turns off when it becomes light. This is ideal for continuous nighttime illumination.
- Kei te Aratau i nga wa katoa: In this mode, the light remains on continuously, regardless of ambient light levels, as long as the wall switch is in the ON position.
Hurihia i waenganui i nga Aratau:
- To activate D2D Mode: Quickly switch the wall switch OFF then ON. The light will flash once to confirm D2D mode is active.
- To activate Always On Mode: Quickly switch the wall switch OFF, then ON, then OFF, then ON (OFF-ON-OFF-ON). The light will flash twice to confirm Always On mode is active.
Whakaahua 6.2: Mode selection using the wall switch.
6.3 Adjustable Light Direction
The two light heads can be independently adjusted to direct the light precisely where needed. Each head can rotate up to 330 degrees horizontally and tilt up to 120 degrees vertically.
Whakaahua 6.3: Adjustable light direction with 330° rotation and 120° tilt.
7. Tiaki
Regular maintenance helps ensure optimal performance and longevity of your ALUSSO outdoor light.
- Te horoi: Horoia te taputapu i ia wā ki te wai ngohengohe,amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Tirotiro: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the gasket around the base remains intact to maintain its waterproof rating.
- pūtau whakaahua: For D2D mode, ensure the photocell (located on the fixture) is kept clean and free from obstructions (e.g., leaves, dirt) to allow proper light detection.
8. Te Raru
If you encounter issues with your ALUSSO outdoor light, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te rama e ka ana | Karekau he hiko waea hē He tika te whiriwhiri aratau | Tirohia te pūwehenga hiko/fius. Me whakarite kia whakahokia mai te hiko. Verify wiring connections are secure. Cycle modes using the wall switch (refer to Section 6.2). |
| Light stays on during the day (D2D mode) | Photocell obstructed Insufficient ambient light reaching photocell | Clean the photocell lens. Remove any obstructions (e.g., overhanging branches, dirt). Ensure the light is not installed in a location where artificial light (e.g., from a window) is hitting the photocell. |
| Ka whiti marama | Hononga waea matara Putanga hiko kore | Whakawetohia te hiko, ka tirohia anō ngā hononga waea katoa. Consult a qualified electrician if power supply issues are suspected. |
9. Pūtāhui me te Tautoko
This ALUSSO product is covered by a manufacturer's warranty. For specific details regarding the warranty period, terms, and conditions, please refer to the product packaging or contact ALUSSO customer support directly.
For technical assistance or further inquiries, please reach out to ALUSSO customer service through the contact information provided on the product packaging or the official ALUSSO webpae.
