Kupu Whakataki
The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.
Ihirangi mokete
- Varmilo VPE87 Mechanical Keyboard
- USB-C taura
- 2.4 GHz Wireless Receiver (typically stored in keyboard)
- Keycap Puller (may be included)
- Switch Puller (may be included)
Tatūnga
Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.
1. Physical Connection and Initial Charge
Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.
- Honoa te taura USB-C kua whakaratohia ki te tauranga USB-C o te papapātuhi.
- Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
- For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).
2. Te Whakarite Koki Papapātuhi
Whakaahua: taha profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.
The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.
Nga Tohutohu Whakahaere
Aratau Hononga
The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.
Aratau Waea
- Connect the USB-C cable from the keyboard to your computer.
- Ka mōhiotia aunoatia te papapātuhi e tō pūnaha whakahaere.
- This mode also charges the keyboard's internal battery.
Aratau Nihokikorangi
- Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
- I runga i to taputapu (rorohiko, papa, atamai), whakaahei i te Nihokikorangi me te rapu taputapu hou.
- Select "Varmilo VPE87" (or similar name) from the list of available devices.
- Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.
2.4 GHz Aratau Ahokore
- Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
- Monohia te kaiwhiwhi USB ki tetahi tauranga USB e waatea ana ki to rorohiko.
- Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
- Me hono aunoa te papapātuhi ki te kaiwhiwhi.
Mana Whakamuri
Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.
The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:
- Fn + Arrow Up: Whakanuia te kanapa o te papamuri.
- Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
- Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.
Hotswap Sockets (Switch Customization)
Whakaahua: Runga view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.
The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.
- Tango Pūmatua: Use a keycap puller to gently remove the desired keycap.
- Tangohia te Pātene: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
- Kōkuhu Whakawhiti Hōu: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
- Whakakapi Kuputuhi: Whakahokia te taupoki kī ki runga i te pana hou.
Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.
Ētahi atu āhuatanga
- Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
- 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.
Te tiaki
Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.
- Te horoi i nga taapu matua:
- Whakamahia te kumea kaapu matua hei tango i nga potae matua.
- Ūkuia ngā pūmatua ki te pānuitangaamp kakahu me te hopi ngawari. Āta karohia ngā matū kino.
- Ensure keycaps are completely dry before reattaching.
- Te horoi i te Tinana Papapātuhi:
- Whakamahia he kakahu ngohengohe, maroke hei muru i te mata o te papapātuhi.
- Mo te puehu me te para i waenga i nga taviri, whakamahia te hau kōpeke.
- Rokiroki: Whakaorangia te papapātuhi ki te waahi hauhautanga, maroke atu i te ra tika me te wera nui.
- Ringihanga Wai: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.
Raparongoā
If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:
| Raruraru | Rongoā |
|---|---|
| Keyboard not responding in Wired Mode. |
|
| Kaore e taea te hono ma te Nihokikorangi. |
|
| 2.4 GHz wireless connection is unstable or not working. |
|
| Backlight is not working or dim. |
|
| A specific key is not registering. |
|
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Varmilo |
| Tauira | VPE87 |
| Whakaahuatanga Papapātuhi | Hangaia |
| Hangarau Hononga | Bluetooth, USB-C (Wired), 2.4 GHz Wireless |
| Te maha o nga Kī | 87 |
| Whakamuri | White LED (Single Color) |
| Nga waahanga motuhake | Backlit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel |
| Pūrere Hototahi | Pona, PC, Waea atamai, Papa |
| Color (Switches) | Kailh Prestige Clicky (as per product listing) |
Pūtāhui me te Tautoko
Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webpae.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webpae, ma te kaihokohoko ranei i hokona e koe te hua.
Visit the official Varmilo Store for more information: Varmilo Store on Amazon
