Kupu Whakataki
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi 3-in-1 Convertible Sleeper Chair. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.
Nga Korero Haumaru Nui
WHAKATŪPATO: Always follow the assembly instructions carefully. Be cautious when using the arm rest to avoid injury. Do not exceed the maximum weight capacity of 440 lbs.
- Me whakarite kia mau nga waahanga katoa i mua i te whakamahi.
- Tiakina nga tamariki me nga kararehe i te wa e huihui ana.
- Do not stand on the chair or bed.
- Kaua e whakatakoto tika i ngā mea wera ki runga i te papanga.
- Regularly inspect the chair for loose parts or damage.
Ihirangi mokete
Tirohia kei te noho katoa nga waahanga i mua i te tiimata o te huihuinga. Mena kei te ngaro, kua pakaru ranei etahi waahanga, waea atu ki te tautoko a te kaihoko.
- Sofa Chair Base
- Pounamu Pounamu
- Urunga nohoanga
- Tikanga Moenga Toia-waho
- Papa Pads
- Kete Taputapu Huihuinga
- Pukapuka Tohutohu
Tatūnga me te Runanga
Follow these steps to assemble your Polibi 3-in-1 Convertible Sleeper Chair.
- Wewetehia nga waahanga katoa ka whakatakoto ki runga i te mata ma, ngawari kia kore e pakaru.
- Attach the armrests to the main chair base using the provided hardware. Ensure they are securely tightened.
- Insert the backrest cushion into its designated slot.
- Place the seat cushion onto the chair base.
- Verify that the pull-out bed mechanism operates smoothly.
Image: Dimensional diagram of the Polibi 3-in-1 Convertible Sleeper Chair. Shows the chair in upright position with dimensions: 33 inches height, 33.5 inches depth, 34 inches width. Seat dimensions are 18 inches height, 24 inches depth, 20 inches width. The diagram also illustrates the chair converted to a bed, showing a total length of 66 inches and a width of 24 inches for the extended section.
Nga Tohutohu Whakahaere
Converting from Chair to Lounger/Bed
The Polibi 3-in-1 Convertible Sleeper Chair can be easily transformed into a sofa chair, lounger, or single bed.
- Sofa Chair Position: Ensure the pull-out section is fully retracted and the backrest is in the upright position.
- Lounger Position: Gently pull the portable handle located on the front of the seat to extend the footrest section. The bottom pulley device will assist in smooth extension. Adjust the backrest to your desired reclining angle (105° to 145°).
- Single Bed Position: Fully extend the pull-out section until it is flat. Adjust the backrest to a fully flat (180°) position to create a single bed.
Image: The Polibi 3-in-1 Convertible Sleeper Chair displayed in its three primary modes: a standard sofa chair, a recliner with the footrest extended, and a fully flat single bed configuration.
Whakaahua: He tata view of the Polibi Sofa Bed Chair's adjustable backrest, showing three common angles: 105 degrees for coffee/sitting, 145 degrees for reading, and 180 degrees for sleeping.
Image: Detail of the pull-out section of the Polibi Sofa Bed Chair, highlighting the portable handle for easy extension and the smooth pulley device at the bottom for effortless conversion.
Te Tiaki me te Tiaki
Proper care will extend the life of your convertible sleeper chair.
- Te horoi: For general cleaning, vacuum the linen fabric regularly using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
- Tiaki Tāpare: The sturdy metal frame requires minimal maintenance. Periodically check all bolts and screws and tighten if necessary.
- Tiaki papanga: Āta karohia te whiti tika o te rā mō ngā wā roa hei ārai i te memeha.
- Raukaha Taumaha: Kaua e neke ake i te kaha o te taumaha o te 440 lbs.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Difficulty converting chair to bed. | Kua āraia te tikanga, kāore rānei i te tino whakamahia. | Ensure no objects are blocking the pull-out mechanism. Apply gentle, even force when pulling the handle. Check if the pulley device is clean and free of debris. |
| Ka rere te noho, ka wiri ranei. | Ko nga taputapu huihui wetekina. | Inspect all bolts and screws. Tighten any loose connections using the appropriate tools. |
| Backrest does not adjust smoothly. | He pakari, he ārai rānei te tikanga. | Ensure no fabric or foreign objects are caught in the backrest adjustment mechanism. Apply light lubricant to moving parts if necessary (consult customer support first). |
Whakatakotoranga
- Waitohu: polybi
- Tauira: B0CLTSMDC8
- Tae: Mā
- Rauemi: Linen (Fabric), Sponge (Fill Material), Metal (Frame)
- Product Dimensions (Chair): 33.5"D x 34"W x 33"H
- Product Dimensions (Bed): Tata ki te 66" te whānui x 34" te whānui x 24" te teitei
- Raukaha Taumaha: 440 lbs
- Kāhua Whakamuri: Te Whakamuri
- Āhuahira Motuhake: Arm Rest, Cushion Availability, Convertible Design
- Awhe Tau (Whakaahuatanga): Pakeke
- Whakamahinga o roto/waho: Roo-roto
Pūtāhui me te Tautoko
For warranty information or customer support, please contact Polibi directly through their official webte pae tukutuku, te toa hokohoko rānei i hokona mai ai te hua. Puritia tō rīhiti hoko hei taunakitanga hoko.
Kaupapa Whakahoki: This product typically has a 30-day return/replacement policy from the date of purchase. Refer to your retailer's specific return policy for details.
