Kupu Whakataki
This manual provides instructions for the proper setup, operation, and maintenance of your NIXON Time Teller A1373 analog watch. This timepiece features a Miyota Japanese quartz 3-hand movement and is designed for daily wear with a 10 ATM (100-meter) water resistance rating.
Tatūnga
Te Whakaritenga i te Wa
- Kimihia te karauna ki te taha matau o te pouaka mataara.
- Gently pull the crown out to the first position. You may feel a slight click.
- Hurihia te karauna ki te karaka karaka, ki te taha karaka ranei hei whakatika i nga ringaringa haora me nga meneti ki te wa tika.
- Once the time is set, push the crown back into its original position against the watch case. Ensure it is fully seated to maintain water resistance.
Whakaahua: Mua view of the NIXON Time Teller A1373 watch. The crown for time adjustment is visible on the right side of the case.
Adjusting the Leather Band
The watch features a 20-18mm tapered custom leather band with a stainless steel buckle. To adjust the fit, simply move the buckle pin through the available holes on the strap until a comfortable and secure fit is achieved on your wrist.
Whakaahua: Hoki view of the watch, highlighting the leather band and buckle for adjustment.
Te Mahi i te Mataara
Time-Telling
Your NIXON Time Teller A1373 watch displays time using three hands: an hour hand, a minute hand, and a red second hand. The dial features raised indices for clear readability.
Water Resistance (10 ATM / 100 Meters)
This watch is water resistant to 10 ATM or 100 meters. This rating means the watch is suitable for swimming, snorkeling, and showering. It is not recommended for high-impact water sports or diving. Always ensure the crown is fully pushed in before any contact with water.
Image: The NIXON Time Teller A1373 watch being worn on a wrist.
Te tiaki
Te horoi
- Take me Crystal: Wipe the stainless steel case and hardened mineral crystal with a soft, damp kakahu. A ape i nga matū kino, i nga taonga abrasive ranei.
- Leather Band: Clean the leather band with a soft, dry cloth. Avoid prolonged exposure to water, direct sunlight, and extreme heat, which can damage the leather.
Tiaki Atete Wai
To maintain the water resistance of your watch, ensure the crown is always fully pushed in. Avoid operating the crown while the watch is wet or submerged. Water resistance is not a permanent condition and may eventually be affected by the aging of gaskets or accidental shocks to the crown. It is recommended to have the water resistance checked periodically by a qualified watch technician.
Image: Engravings on the watch case back, indicating water resistance and movement type.
Whakakapinga Pūhiko
The watch uses one product-specific battery (included). When the watch stops running, it indicates the battery needs replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Raparongoā
- Kia mataara e kore e rere:
- Me whakarite kia pēhia katoatia te karauna ki roto.
- The battery may need replacement. Refer to the "Battery Replacement" section.
- Te kore tika o te wā:
- Tirohia mēnā kua pēhia katoatia te karauna ki roto.
- Ka pāngia te tika e ngā pāmahana tino nui, e ngā papa aukume kaha rānei.
- Mena kei te haere tonu te hee, ka hiahia pea te nekehanga ki te mahi.
- Moisture Inside Watch:
- If you notice condensation or water inside the watch, immediately contact customer support or a qualified watch technician. Do not attempt to open the watch yourself.
Whakatakotoranga
| Tau tauira | A1373-5247-00 |
| Te nekehanga | Miyota Kuata Hapanihi Ringaringa-3 |
| Rauemi Take | Custom Solid Stainless Steel |
| Te Diamita o te keehi | 37mm |
| Ātete wai | 10 ATM / 100 Meters |
| Kiriata | Tioata Kohuke Whakamārō |
| Rauemi Band | Custom Leather |
| Whanui Band | 20mm-18mm Tapered |
| Momo awhi | He kowhatu kowhatu kowhatu |
| Pūhiko | 1 Hua Motuhake (kei roto) |
Pūtāhui me te Tautoko
Nga korero Whakaputanga
NIXON watches are covered by a limited warranty against defects in materials and workmanship. Please refer to the official NIXON website or your purchase documentation for specific warranty terms and conditions, including duration and coverage details.
Tautoko Kiritaki
For technical assistance, service, or warranty claims, please contact NIXON customer support through their official website or the contact information provided with your purchase. When contacting support, please have your watch model number (A1373-5247-00) and purchase details available.
NIXON Official Webpae: www.nixon.com
